ActionScript 3.0 :: CS3 - Project Logic - Display Content In Groups
Mar 26, 2009
I need to display my content in groups of 9 (3 rows, 3 columns). The content is listed in an XML doc. I load my XML and then (here's where I would like your thoughts):
1. I will create a loop to assign an int. for each XML sibling (the content that will be displayed).
2. I will create an empty MC for each int.
3. Display each int.'s corresponding content into the MCs.
4. Display each MC on the stage.
** displaying my MCs on the stage in 3 rows and 3 columns is also confusing me... but this is another thread for later.
View 2 Replies
Similar Posts:
Feb 11, 2007
what i want to do is display a set of items by 10, so clicking next_btn shows the next 10 items and also adds 10 items to the start_count var so that the next set starts at the first count (ie 21,31, 41..). counting seems to work fine even if the limit_count var is 54, which shows only 51,52,53,54.
The problem is the backward counting, the operation looks normal but the logic is wrong, when i click the prev_btn the set is repeated (ex. click next appears 1-10, click next again shows 21-30, click prev shows 21-30).I've attached the code below so that you can see what i mean. I think my logic seems wrong somewhere along the code.
Code:
var limit_count = 54;
var start_count = 1;
var end_count = 0;[code].......
View 1 Replies
Mar 10, 2011
Process terminated unexpectedly.
Initial content not found
Launch command details: "C:Program FilesAdobeAdobe Flash Builder 4sdks4.0.0inadl.exe" -runtime "C:Program FilesAdobeAdobe Flash Builder 4sdks4.0.0
untimesairwin" "C:UsersacerAdobe Flash Builder 4Dental Clinic_2Main-app.xml" "C:UsersacerAdobe Flash Builder 4Dental Clinic_2"
I get this error when I try to run the program...this is my first time to import other projects.. I dont have this problem with my own program this just appeared from the project I imported...
View 1 Replies
Jun 28, 2008
I have an xml doc which works beautifully....now I want to edit the "content" so that it display html content, ie....within the text of the "content" I could add bold tags or add a links or something like that....I have looked up and down and no thread I could find has a straight forward definitive answer...not just on here either...is it that difficult...i doubt it?I will have to set the properties of my text box to accept html...right?so something like this....
theText.html = true;
THis was my attemp...(the first part)...but no deal...
Code:
<icons><icon image="shoes.png" tooltip="www.shoes4crews.co.uk" content="I made this...<![CDATA[<a [code]....
View 1 Replies
Aug 31, 2011
I am currently developing an application in the latest version of FlashBuilder and I cant seem to find out how I can incorporate AdMob ads or any other Ads into my application.There seen to be a few tutorials online focused on Flash however im not sure how to get those to work in the Flex environment.
View 2 Replies
Jan 23, 2012
I am running Flex mobile project and I would like my mobile app to be able to load and display pdf files that are saved locally. I do not want to go out to the web to access these pdf files.
I cant figure out how to make this code work for a locally saved file.
Error MSG: "Error #2044: Unhandled ErrorEvent:. text=Load error."
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
overlayControls="true" title="PDF Display"
[Code]...
View 2 Replies
May 16, 2011
I'm still learning how to use Flash... and am still struggling on one thing. It may seem simple to the most of you -- how exactly do you have the content displayed once you click the button? I'm attempting to have the content for each navigation link button to show up each time it's clicked. Still a failure.
View 4 Replies
Mar 5, 2010
Long story short, I'm developing a theme template for a blog that enables you to view the posts in blocks. The main part of the post is displayed at first, then the secondary content is displayed over that when you hover over the post block. Everything works fine on a Mac Versions of all major browsers, but start browsing on a PC, and all hell breaks loose when you start trying to display content over Flash Video embeds. The flash element remains visible over the content. It's completely unusable.
From a PC, you can view an example of the problem here: [URL] I'm almost certain this is a bug in the Flash Plugin for Windows, but I was wondering if anyone else had come across this problem before, and if there were any solutions.
View 3 Replies
Mar 30, 2011
I have XML pages with some defined structure , now using flex I want to display the content of these pages. The purpose of using Flex is to give better look. If I can use something else which will provide a good UI to display then also its fine.
View 2 Replies
Jul 24, 2009
I'm trying to create a flash file which will list the content of an XML file.
I have it working so I can display the first row of content I want but now I need to be able to "loop" through the whole XML file to display all rows.
The XML looks like this (very short sample below, the real xml file got over 100 member elements)[code]...
View 0 Replies
Dec 18, 2010
I want to use lightbox to display Flash video player.I would like to have lightbox load a page that has SWFObject code for displaying the Flash content. This page with the Flash content and SWFObject will have certain paramters and vars Does anyone know of an example or tutoral for doing this?
View 9 Replies
Jul 1, 2011
I am calling one method at an interval of 3 sec. This method reads a file from server and then display its content. The file which is getting read is a log file which gets updated at regular interval. The issue is once some content read by AS then it is not getting updated that means after every execution of the function content of src variable below remains same even thou the source file is updated.
View 3 Replies
Aug 22, 2011
I created a scrollpane in as3 and set its source to another object, which contains several rows of icons. The scrollbar in the scrollpane is getting the right length, which means the object was loaded as expected, but the contant is not showing correctly.
I created a Thumbnail class for this file to load and make each individual thumbnail. Here is my code, the red text is where each thumbnail is loaded:
import fl.containers.UILoader;import caurina.transitions.*;import flash.events.Event;import fl.containers.ScrollPane;
var urlRequest:URLRequest = new URLRequest("pics.xml");var urlLoader:URLLoader =
[Code].....
View 7 Replies
Oct 11, 2005
link to a tutorial that explains how to display data in a grid/table style view. I'm trying to create a catalog (using xml), I know how to display the information retrieved from the xml file, I just don't know how to display it in a grid/table style. And also the next and previous buttons I got to work while showing one at a time (kirupa xml gallery tutorial).
View 2 Replies
Jul 30, 2003
I try to display xml content in a text box with flash5, can display firstchild nodevalue, but firstchild.firstchild.nodevalue gives me always null. The xml file text is something like this:
Code:
[slideshow][slide]flower[/slide][/slideshow]
View 8 Replies
Sep 11, 2003
I've been working on this catalog system for awhile now, and have it working almost perfectly. But one problem still remains...
I'm dynamically loading content (jpgs & text) into a scrollpane from an xml file. It should display an image, and then below it some associated text. My problem is that when the content loads in, the first jpg isnt visible. I'm pretty sure its there because all the other jpgs load. What I think is happening is that the scrollpane is displaying the text below the 1st jpg at the very top of the scrollpane, which leaves the jpg above the scrollpane and thus not visible.
When I first started this catalog. I was loading the content into an MC I had manually created and was attaching to the scrollpane via attachMovie. I had the same problem as above in this scenario as well...and to correct that what I did was make a box that went around the entire are that the jpgs and text loaded into. This allowed the jpg to show up.
But now that I'm dynamically creating both the holder MC and the textfield, I'm back to losing the 1st jpg image. It seems to me that the scrollpane needs something above the jpg holder MC for it to be displayed.
Here is the code I'm using to load and create everything.
Here's the code:
[AS]tFormat = new TextFormat()
tFormat.font = "Verdana";
tFormat.size = 10;
[Code]....
View 1 Replies
Jun 21, 2010
I cant "center" my project, like you can see its "fixed" (yellow lines) in the left side and I cant see "invisible" part of project... (area around the project). how can I move my project so I can see the not-project area around the project. (picture 2).
At the moment situation... (cant see that area around the project)
http://img19.imageshack.us/img19/1186/68553623.png
View 2 Replies
Oct 26, 2011
I've been asked to incorporate a cover flow into a project I'm working on. Although there are many components available I've been asked for it to loop round i.e. the slideshow has no left and right end, when the last item in the XML is reached it seamlessly keeps scrolling by going back to the start of the array. Does anyone know of a coverflow component with this function?
View 2 Replies
Feb 20, 2012
I want to display HTML formatted content from various sources inside a Flash Flex application. Flash supports HTML formatting in its text fields, however it is very limited compared to a web browser. Are there any scripts out there that will convert common HTML formatted text into a format that Flash can handle? My particular use cases are:Displaying HTML formatted emails inside FlashDisplaying RTF files inside Flash (after running an RTF2HTML conversion on the server)Displaying random HTML content copied and pasted from other sources into Flash
View 3 Replies
Jul 1, 2011
This method reads a file from server and then display its content. The file which is getting read is a log file which gets updated at regular interval. The issue is once some content read by AS then it is not getting updated that means after every execution of the function content of src variable below remains same even thou the source file is updated.
[Code]...
View 1 Replies
May 31, 2008
I want to pass the state and city variable to the swf file from the swfobject and then display the content of the variable from the xml file.
SWFOBJECT
<script type="text/javascript">
YUE.onDOMReady(function() {var so = new SWFObject("assets/promoKiosk.swf","amenities","628","600","8","#FFF" );
so.addParam("wmode","transparent");
[code]....
View 9 Replies
Jul 7, 2011
I am trying to read a XML file and display its content in a simple list component or at the console. The problem is that the event listener is triggered in an infinite loop.
The code:
var myXML:XML;
var myLoader:URLLoader = new URLLoader();
myLoader.addEventListener(Event.COMPLETE, processXML);
[Code].....
View 1 Replies
Aug 25, 2010
I have 7 icons on the left side (vertically) with two stationary phones on the right side of the movie clip and all of the icons has its own different URLs like differentiator.aspx?point=1 (2, 3, 4, 5, 6, and 7). If I click one of them, the animated phone appears on the right side, but the problem is how do I display the content of page from each icons on the left side? Its like two onClick events at the same time; one to play the "scene" and one to change the content of the page.
View 9 Replies
Nov 28, 2002
Is there any way possible I can get a dynamic text box to display the selected content of a list box.
I can email the project Im currently working on for better understanding.
View 14 Replies
Dec 7, 2011
was just trying to make my site more efficient when its online. I have an image/video gallery. When the thumbnail is clicked, an image or video will be displayed in the container I have. Currently, the code is like
[Code]...
And if so, will it be in the cache or anything when it is loaded again within the click event?
View 3 Replies
Jan 13, 2010
I have been working with this script for a few days now and have gotten to a near completed point, but I can't seem to script the final step. I have an xml file that is being parsed into my .fla file. There are 3 buttons which are dynamically created based on a tag called <navItem>. The function 'displayContent' should be displaying the appropriate chunk of xml in various text boxes, but instead, it only displays the last chunk (the 3rd chunk) no matter which button I click on. I have pasted my code on pastebin here:[URL]
View 13 Replies
May 13, 2011
I'm creating a backend using flash, php and mysql. The problem i'm having is that i have 2 dynamic text fields on the stage that i want it to display their content based on the page i am. My txtTitle is showing both mysql rows together like this: Aboutabout_content=About from MySQL Here is my coding:
[Code]...
View 1 Replies
Oct 8, 2010
I've messed around a bit in Java and Visual Basic. For our class we've been assigned to make a flash game in groups, and our group has decided they want to do a base defense game. I've been looking hard for open source/tutorial versions of a simple base defense game, but all I've found are tower defense games.
View 1 Replies
Aug 27, 2010
I've noticed recently (the last week) that when I open Flash CS4, the Tools panel and the Actions/Timeline/Compiler Errors/Output panel group are not automatically open, like they always were before. Does anyone know of anything I could have changed by accident?
At the same time this started happening, I have a file that has a moving hot spot that is set with keyframes (depending where the active button is on the bitmaped screen capture behind the button). Even though the button's onRelease handlers are advancing the timeline correctly, my button is not in the right place in the runtime version. If's still fine in the development environment. It's like the layers are out of sync with each other.
View 1 Replies
Apr 19, 2011
I am trying to automatically resize the children within an s:Group. The children are another s:Group and a H:Group. Each have a percentage width of 10% and 90% each. The problem is that when one of the groups is resized (using a transition and rotation combination in the Skin), the other group does not automatically resize to fill the space?
Shouldn't Flex do this automatically? or do I have to code this?
<s:Group
id="listsGroup"
width="100%"
height="255"
[Code]....
View 1 Replies
