I'm trying to do this: When I roll over a button, an image appears. I have three buttons and 1 image per button that corresponds with it. When I roll out, the image disappears. I have most of it figured out, but the part that gets me is how to make each button correspond to one image. Right now when I roll over all three buttons, it only shows the image the first button should.
View 2 RepliesIm trying to make a cursor display when rolling over a movieclip only between a specific range of frames. with this code the cursor shows up in the range of frames but doesnt follow the mouse, and the mouse pointe ris visible
Code:
thisFrame = _root._currentframe;
if (thisFrame > 50) {
if (thisFrame < 90) {
[Code].....
I use this smooth, nice (and simple) image gallery, and I am very happy with it. However sometimes some of the images stops when rolling in, and I have to press Fw again to jump to the next one. I can't figure out where the bug lies, as I mentioned it appears rarely but it blows up the whole thing.
[Code].....
My MC button is now working as expected with one problem... when I click the mouse button when over a MC button then roll the mouse off the button and release the mouse button, the button stays 'hilighted' (in frame 3 of the button MC) until you roll the mouse over it again.I'd like it to stay highlighted only as long as the cursor is over the button and the mouse button is held down...when you roll the mouse cursor off the button it should release it and send it back to frame one of the button MC. Does that make sense?Here is the code:
btn1.onRollOver = function() {
this.gotoAndStop(2); //highlites the button
this.dt.text = menuArray[0][0];
[code].....
I was visiting this site mentioned in a book about flash we sites [URL]. and i really got curious about the effect of the picture in the background. when you roll over the area they practically have an alpha tween...but i think it's not just alpha tween...i noticed that the brightest parts of the image you have rolling over are also the darkest when the Tween begin. is kind of "selective alphaTween"?.
View 2 RepliesCan i hide or make a MC invisible when rolling out from a button or another MC?
View 8 Replieshave the indicator arrow go to the button that was last clicked after rolling out of the menu.I have lost track of what all i have tried.URL...
View 1 RepliesI have a movie clip (mc_menu) that sits on the main timeline. Inside mc_menu I have several buttons that display items inside the mc. I also need to display an image on the main timeline. I have converted the image to a movie clip (mc_01). I am using AS2.
View 2 Repliesi am trying to to do the following. I have 2 buttons on a page.when i click the first button it should just display the image i want it to.when i click the second button it should display the other image i want to display.
View 2 RepliesIn my program i need it to display an image along with some facts at the click of a radial button.I have it set up now where it displays the image with a radial button and loads a new one if i click a new button but it keeps the same fact text instead of changing it.have the text in a if else statement:
if (imageArray[0]) { facts_txt.text = "Inner Planet" + "
" + "Name Meaning: Messenger." + "
" + "Name Origins: Mercury is named after the Roman God of Trade." + "[code]....
i want to rotate 3D an Image called img1 in Flex. I want to rotate it around y axis 180 degree. I can do this by using 3D effect already built in Flex but i want to do a bit more different. I want during rotating, there's another image called img2 appear on back of img1 (in default case, the image appear on the back is img1) and when rotating finish, the image will be img2.
View 2 Repliesim messing with a movieclip symbol and i want to make a button, what'd i mean on Mouse over display/change this image in this X,Y cords or replace this image, something close to what buttonSymbol does but i want to make it using movieClip symbol...
and i have no idea how to do it.. i started like this:
[Code]....
After browsing for the images, and selecting them. How can I display a preview of the image in the datagrid? I am able to display the file name, file size, but was unable to display the image. Below are the codes I have written, it is not a complete code but just enough to make it understandable.
// variables used
var list:Array = new Array();
var listDP:Array = new Array();
[Code]....
this is EXACTLY what i want... but in AS2 [URL]..a very simple click on a button, popup appears of image, and then an exit button on the image.
View 6 RepliesI am using this following code to display images using xml.Everything is working fine for me but i have to add background image or border to the displayed image using function BitmapFileMaterial.
using BitmapData or Bitmap Class but same functionality.
[Code]....
I have a scrolling image. Like the speed, like everything about it except that the image keeps panning out of sight on either side never to be seen again! What to Doooo??
View 3 Repliesi need to do another one, exactly the same, but it will have a rolling picture (4) when 1 button is rolled over.
I can set it up to fade in when the mouse rolls over, but i am just wandering how to set it that i can make 4 images fade in after eachother after a space of about 3 seconds. If you need code i am more then happy to give what i have at the moment. i am assuming i will need a timer in there but i am not very good at AS3.0 so i do not know how to write it
I have two movieclips; mc1 & mc2. When rolling over mc1 I'd like to change the alpha level of mc2 to 50%.
View 2 RepliesI have several flash based lessons that I have created that are being distributed online to several companies. Each lesson has a video that is played within the lesson through the flvplayback control. The videos were supplied by a third party and some of the videos are encoded at 384K and some are at 568K.
One company that is attempting to view the lessons is seeing the following behavior. The video plays for approximately 20 seconds then suddenly the video drops out and the audio continues to play. With the audio still playing the video scrubber rolls back and attempts to start the video again but all that comes through is the audio track again. Now there are 2 instances of the audio playing with no video. This happens a third time and finally keeps going until all the audio is played out.
The IT staff at the company has showed me a fiddler log that shows the flash player making a connection out to Akamai to retrieve the video and then rolling from port 80 to port 1935 and finally to port 443. This would explain the three audio tracks playing
I have read that the flash player will attempt to gather the stream from the stated rtmp location and then if it encounters an issue with a proxy or firewall it will attempt the other ports.So I am not sure if there is anything I can do by design or programatically to alleviate this issue. It appears to me that the company attempting to view this video has some kind of bandwidth throttling program in place that is kicking off this behavior in the flash player.
Is it possible to prevent the flash player from making the three attempts? Would a sudden cut of bandwidth prompt the player to attempt to roll to another port if a network load balancing program suddenly kicked in? If it is bandwidth is that why the audio stream continues to play because there is enough bandwidth for the audio track to get through, but not the video?
I have attached a screen shot of the sniffer output so you can see the rolling ports thing.
Attachments:
networkSniffer.gif
(33.7 K)
I want to make an e-card for a marriage in flash. The card opens from the top. How do i give an effect of the card being opened on click? or even the card being opened automatically!
View 1 RepliesI am trying to make a banner where two colored squares roll across the screen. The first blue square does just fine, however when trying the same thing with a green square (in a different layer) it does ok the first half of the tween, but reverses direction in the second half (where I placed a keyframe)- even though I rotated the green square the same way as the first half.
View 7 RepliesMy goal is to simply have the cursor swap to be a hand (pointer) when I roll over a MovieClip. Obviously I could use SimpleButton, but the situation is that I have some enemies that are obviously MovieClips, and when I select an ability to use I want the mouse to show as a pointer when I roll over them.
I assumed this would work:
var mc:MovieClip = new MovieClip();
mc.graphics.beginFill(0);
mc.graphics.drawRect(0,0,50,50);
[Code].....
There are workarounds such as adding a button into the enemy MovieClip and then removing it. Just seems there's an inbuilt way I'm missing.
I have a menu with buttons at the bottom of my page, and I want to have a textfield with info about each of the buttons.When you roll over on of the buttons, the info comes up, and when you roll over the next, that info replaces the other one. Standard thing. My buttons is inside a movieclip on the page where I want the info.
View 3 RepliesWhat code would I apply to a movie clip to make it rotate on one end according to the angle (location) of the mouse.
View 6 Repliesi'm trying to learn some AS. Now i made some simple code which should bring the alpha down step by step, en bring it back up when rolling outside.
[Code]...
this is the part for alpha down as you can see, but i think this goes way to fast. how can i slow this progress down?
I'm trying to create a horizontal drop-down (well, sliding in actually) menu bar that expands to stage when rolling over it, and collapsing in when rolling-out. Problem is, when I roll-over one of the buttons in the menu, flash thinks I'm rolling out from the area that was supposed to trigger the menu in.I have attached the file I'm working on (hopefully the most accurate one, as I tried dozens of solutions and wasn't very careful with naming...
View 4 Replies[URL]how I could disable previous button in the first image and the next button in the last image?
View 7 RepliesI'm a flash newb and want to be able to create a rolling product feature as on Barnes and Noble's homepage. http:[url].....I'm sure there's probably already movies or tutorials on this but don't really even know where to look.
View 1 Repliesi have the logo rolling but would like it to have an elastic effect sort of bounce at the end of my motion path. how to add extra keyframes on my motion tween to achieve this effect
View 1 Repliesflash cs3 and im having a problem displaying an image from an external folder using XML. ve created an image holder movie clip on my stage however im not sure what code I need to include to load the image from XML into the holder movie clip.I also have a second image that i want to display in a different movie clip from the same XML code.
View 1 Replies