What I want to do is have an image and fill within the contour of the image with circles of selected size. what would be the first step in doing this? Or is this even possible simply in AS3?
View 2 Replies
I have an image that doesn't fill the <mx:Image> tag because it's not the exact dimensions (it is too short) and I have maintainAspectRatio set to true:
<mx:Image id="theImage"
source="{data.photo_thumb}"
horizontalCenter="0"[code]....
The <mx:Image> tag has a fixed width and height (it's 100% of the tile size--this is in an ItemRenderer). How do I get the image to sit on the bottom of the <mx:Image> tag?
Since there is no actionscript function to set the registration point of a movieclip, I created a movieclip that I want to hold my image in my Project.fla file with a centered registration point I then add the movieclip to the stage in my Project.as file:var holder:Holder = new Holder();addChild(holder);The holder is successfully on the stage, and I now load my external image file that I would like to be inside of my image placeholder:var imageLoader:Loader;imageLoader = new Loader();imageLoader.load(new RLRequest("images/ball1.png"));addChild(imageLoader);What I am now trying to do is insert the imageLoader into my holder so that I can alter it as though the registration point is in the center
View 3 RepliesI need to plot a contour chart in the web browser. It needs to be interactive as well. Does anyone know good javascript library, flash or flex libary to do this?
View 1 RepliesI have a movieclip that is only a blue square. However, i want to "fill" that blue square with a pattern made out of an image x.jpg (or x.png, whatever).
And i'd like to do this dinamically in AS3.
I have a small image which is to be tiled on background filling it completely.
View 2 RepliesI've been working on a Flash site on and off for some years now and despite the fact it's been near the finishing stage for some time, the biggest problem I've had has been my custom photo gallery. The concept is simple, a panel has a group of images loaded into it, and each one is resized to thumbnail size. On clicking one of the thumbnails, it enlarges or zooms itself to fill the panel. I've only recently managed to get one image to zoom in from the centre, stopping when it reaches a specific size, and therefore have left it working this way. What I want however, is for the images to be loaded in row formation, and on clicking each one, it "zooms in" from its position to fill the whole panel. Currently I have the thumbnail movieclip duplicated, with a different image loaded into each copy, on clicking one of the images, it zooms from the centre, although obviously, this is not what I want. I've attached my source and images in a file called GalleryProblem.zip.
View 3 Repliesive tried making a image fill preloader using masks etc. When publishing its just showing my preloader not continuing to my content.which is on frame 11. I was wondering if anyne can help me with code?
stop();
mask_mc.DisplayObject.height = 1;
this.addEventListener(Event.ENTER_FRAME, loading);[code]...
i have placed this on frame one where just preloader content is, then all content frames start at frame 11.
I am looking for a way to get a similar effect as posted in the Adobe forums The current solution is very brute force using about 60 intermediate shapes gradually going from the outer shape towards the inner shape while slightly changing the color each time.
[Code]...
particular problem, I only wanted to have a shape fade into the color of the background so my solution was to draw the image slightly larger than usual and use Flash's blur filter to create the gradient effect. This is suitable only because my background image is a solid color so this won't work for everybody. This is also a very cpu intensive method but is faster than drawing 60 shapes.
How do I go about animating a dot to trace the contour lines of a shape, leaving a line path as it goes along? I have the final shape, which is a complex shape, like the shape of a land when you look at a map. For the animation, I was hoping that I can start off with an empty document, and the contour line will begin to trace itself until the final shape appears.
View 8 Replieshow to draw a character like Sprite, so that I can do whatever I want with it.I've seen FIVe3D, which has an automated system which exports an AS file with a description about each of the characters (so that they are represented as motifs - it gets the edges of the glyph and parses it into a script with simple actions as lineTo and curveTo).But this example uses JSFL in order to parse the font (jsfl has functions like contours, interior, getHalfEdge, getControl).
View 1 RepliesI need to fill some movieclip with an external image in AS3. I know how to use an image contained in the FLA's library as background filling, but I don't know how to do this with an external loaded image.
View 3 Repliesif it were possible to apply a tiled image fill to text to create a texture.
View 3 RepliesI am trying to draw a line from x1, y1 to x2,y2 and i want it to be a line that repeats a pattern from an image. All I can see is that you can only draw lines and change their color or thickness but I would like it to repeat an image. Is that possible or do i have to use a really long and thin rectangle with a bitmap fill?The problem is I am making a game where the user will be able to actually draw the line so i have to make it be created dynamically. The game fantastic contraption [URL] has in the game a feature where you draw lines of any length and position that are filed with a picture.
View 13 RepliesI am trying to implement contour lines in ActionScript using Conrec. I have looked at both the java and javascript implementation and am still stuck.URL...Conrec will take grid data and assemble continuous contour lines. The problem is that it does not necessarily draw those lines in a continuous fashion. For example, it will draw A->B and then C->B and then C->D instead of A, B, C, D, etc.The javascript implementation seems to be accounting for this and serializing the instructions into an array of draw points. Which is what I too want to accomplish in the end. That is it takes the instructions from the core Conrec logic (eg: A->B, C->B, C->D, etc) and organizes it into an A, B, C, D series. I think it will also return the series as a multi-dimensional array to accommodate broken lines (eg: [[A, B, C, D], [E, F, G]]). This last functionality is what I need to do in Actionscript.This last part is where I am stuck. Ignore Conrec for now (I have given up on finding an Actionscript implementation), how can I organize these instructions into a collection of serial points? When Conrec gives me "draw point from X->Y" how can I first check if X or Y are already in a series and append either X or Y (whichever is not in the series) into the series? AND if neither are in the series, start a NEW series with X, Y as the starting set. Then check subsequent instructions against all existing series and connect series if they now start and stop on the same point? Also, I need to be able to allow for a series to close itself (eg: A, B, C, A) -- a loop (is that even possible?!).
I'm not sure if there is a technical term for what I want to do beyond "concatenation". I also hope someone out there has done this with Conrec and can give me some pointers.In the meantime, I am going to continue to plug away at this and see if I can come up with something but I am not confident in my abilities.If you know another way to draw contour lines from grid data, I am open to alternatives. But I have to be able to implement it in Actionscript.
The specifications where as follows: there should be a black square in which there is a faint picture of a sign. The user must be able to draw in the square and when he repeats the contours of the sign correctly - a popup appears.I made myself familiar with the ways you can allow a user to draw. However I have no idea how would you know if the two shapes/signs match and whether the user at least approximately drew the correct contour/sign
View 2 RepliesI am new to flash, trying to do some animation character. I have 2 queries
1. What is lock fill; whenever I am trying to fill a color, it shows lock fill....
2. If I am creating a non regular figure like say with pencil, if I draw some part of it & do other part by later; these will be assumed different objects & I am not able to fill the whole figure with a selected color.
I have a scratch card. Basically I'm masking a movie clip with an empty shape. I can draw on that mask and thus my movieclip will become visible. I have also attached the fla.
Now what I would like to achieve is that when you fill a percentage of that mask, let's say 70%, I automatically fill the whole layer so that all of my movieclip becomes visible (as mask is fully filled).
1. I selected the Rectangle tool, and made sure Object Drawing Mode was not selected.
2. I picked colors for stroke and fill, and drew a rectangle.
3. I clicked the Selection tool, then dragged around the rectangle to select all of it.
4. In the Property Inspector I clicked the fill color icon. I clicked the square with the slash, to designate no fill. The fill disappears.
Everything has worked so far. But now I decide I want a fill color after all. I select the shape again. But clicking the fill color icon in the Property Inspector and the Tool panel has no effect on bringing a fill color back to the shape. I can't figure out how to do that.
Actually, I could restore the original fill color using Undo, or the History Panel. But it seems there must be a way using the Property Inspector.
I have a main SWF that loads an external SWF with addChild. the external SWF loads fine but when i click the combobox in the external SWF I get 2 errors:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at fl.controls::ComboBox/close()
[code].....
How the hell do you pull this off? [URL]
Those Flash banner ads that expand to fill the screen when rolled over?
The following are two screenshots of something I'd like to create:
Notice how each 'blank' is a drop-down menu. If a user selects the correct one the text in the drop-down becomes green and a box appears at the bottom that tells them they got it right. As soon as they go to select a new one the box disappears and re-appears with a message saying either they got the next one right or wrong. If they get it wrong it turns red. There is no backend data that needs to be processed; it's just the interaction I want to create.
how I might go about doing this in Flash/ActionScript?
I know how to create the interface itself I believe with the drop-down component but I have no idea how to program this.
Half a year ago I started working on this game. One of the aspects of it involves clicking a point on the screen and a path made of 32x32 squares will be drawn from its current point to the clicked point. Well at the time I jsut needed to do a quick prototype so I did something like this.[code]That worked perfectly then and simply filled the path with that color. However now I want to break away from a solid color and fill the path with 32x32 .png tiles. If it helps to better visualize picture it similar to an RPG world maker or an RTS level editor.It's been a few months since I've looked at actionscript.
View 1 RepliesI have created a thermometer.How to fill the thermometer upto a certain point.
View 6 RepliesCS4 - Colour fill for on clicking?
View 2 RepliesI am doing a site for my senior project in college and I was wondering what the best way to use a background image in flash is? I'd like the background image to fill the browser all the time, so resizing the browser will resize the background. Basically, is there a way to make the stage size the background? I'd like to be able to shift the background via AS tweening, but I want to make sure that what's on the stage is what's in the browser and can't see beyond that.
View 1 RepliesThe url below will direct you to that thread. [URL] I want to make it dynamically so the any number/digit will fill Zero before it. If someone needs to explain it here I can paste it for him/her. I am very new using forums. All my threads are regarding of one project so this will help to build it up. If you want to know about the project, here is the link: [URL]
View 9 RepliesI'm looking for an AS3 version that dynamically populates this shape and allows for difference in font size to give it some more variety and flavour. I've got some examples of tag clouds but they don't accept a shape as its outer bounds and I've found some that allow for a shape but don't account for dynamic resizing of the text. Even a nudge in the right direction would be all I need and I can go from there.
[URL]
How do I make a picture available to be used as a fill for a shape?
View 2 RepliesI've created a colour palette and given each colour a unique number and name (E.g. V123 Plum, V456 Ruby). Also the colour names is being loaded from a mysql database.
When the name of the colour is loaded in to a dynamic box , I want to fill an object in that colour.
var mycol1 = V123 Plum;V123 Plum = "0xFF6600"colorchange.setRGB(mycol1);
var mycol2 = V456 Ruby;
V123 Plum = "0xFFCC00"colorchange.setRGB(mycol2);
