ActionScript 3.0 :: Flash Adding Properties To An Object / Specifically Arrays
Nov 26, 2010
I'm fairly new to AS3. In AS2 I often used objects to store properties so I can creatre them dynamically and refer to them later.Sometime I use an array as a property. I am wondering if my method of doing this is the best way, or if AS3 has other methods that might be better suited.In this case I have an object that stores properties like ID no. and I also want to store an array of sub properties which are in array.[code]
I am running into some trouble adding an array into another array to create a multi-dimensional array.The code appears as below:
var slideDataArray:Array = new Array(); var slideShowDataArray:Array = new Array(); slideDataArray[0] = xmlData.SlideShowParameters.SlideShowImagesDirectory;[code]........
I am looking for a means of placing the slideDataArray into a 'slot' or value of slideShowDataArray so that I can in the end pass the slideShowDataArray as a parameter to another function.As of now, the last slideDataArray appears 11 times (the loop runs 11 times) in slideShowDataArray and the way the code is written the slideDataArray is unique every iteration of the loop.
i'm attempting to cast an object's property as an actual property of another object. here's my object variable: var propObj:Object = {prop:"width", width:50}; now i want to assign the property of a sprite using that object's properties. var sp:Sprite = new Sprite(); sp.(propObj.prop as Sprite.property) = propObj.width; now, i'm not even going to try that because i know the compiler will explode all up in my face. but you should be able to see what i'm trying to do. why i'm trying to do it is because i'm reading in an XML file with an undetermined list of usable properties for specific objects. so instead of writing something like a huge switch statement to evaluate whether the XML file has a value for that specific property, i'm trying to assign properties dynamically based on what's available in the XML file. if what i'm trying to do is possible, what's the best way to do it?
I forgot to put it in the title so I'll just place it here; I am using AS 2.0. I know that there are other ways to accomplish the goal that am after, but I was wondering if anyone knows of a way to access the properties of an object's properties?
Here is the code that I thought of, even though it doesn't work
var a:Object = new Object(); a.bproperty = 0; //lowerlevel properties a.cproperty = 1; // lowerlevel properties
[Code].....
This really just boils down to how I am organizing the code(I have ideas on what do next, and i am 99% sure that I can get them to work), and if there is a way to dynamically access the properties of the objects properties, It will save me from creating yet another large block of code for my project. If you want to see the unfinished project, go to [URL]
We are in the process of building a 64bit version of our software, but we use Flash player's OCX control to host Flash in our windows. This OCX file is a 32bit build, do you know if it's possible to host this 32bit version of Flash within our 64bit application?
I am wanting to install flash CS4, but I want to know exactly which files and registry keys it creates and changes. Spybot informs me of all registry changes, but that is it.Is there any antivirus software or something that will tell exactly which files get changed, created, or deleted during a set period of time or by a specific program? Otherwise I could just search for all files that have been created or modified within the last 45 minutes,
navigating to specific frames from different scenes that are elements of an array. I have a five scene program (Homepage, Chapter_1, Chapter_2, etc.). Each of these scenes includes labelled frames.For scene Chapter_1 has 20 frames labelled chap1_1, chap1_2, chap1_3, etc.
I have a MainClass and a GUIClass.The MainClass lets the GUIClass handle everything about the GUI.How do I call different Object properties from the MainClass to the GUIClass.
What i'm trying to do is creating an array of objects, little squares that are positioned in a grid with coordinates and when i click on the coordinates i need to select only the elements which fit with the value. So, what i'm trying to do now is to pass a value to each element of the array but it doesn't work:
I have an object which is assigned a number of properties:
var project_array:Array = []; var slideObject:Object = { project_title : myXML.projects.project[i].title.toUpperCase(),
[Code].....
but I'm not quite sure where to place this. If I place it outside of the object constructor, I get "term is undefined", I guess because it doesn't know what project_clips_array is - but if I declare project_clips_array in the constructor, it appears to need to be defined, i.e. I can't create a blank property. But I can't place it in the constructor either, because it doesn't seem to allow me to run a function within an object constructor. What is the proper syntax or arrangement of code for executing this function to get the array within the object?
I am trying to find the sum of one column's timings which is like '00:00:00' format. I am splitting the time string at ':' and storing into an array. Then trying to add array1[1] value to array2[1] value. Here I'm not getting type casting logic. I'm getting an error when I give int(array2[1]) += int(array1[1]) .
Allright, i receive a string and want to convert it to object. here a test that i have made:
[code]....
this work pretty fine... but i am receiving the object property as follow: "{a:'test',b:'testAgain'}" How can i easily convert it to object properties?
I've exhausted searches looking for how to add properties to the component properties panel for a custom AS2 and AS3 components.This Adobe Livedoc suggests using Inspectable tags before variables:[URL]I've also tried adding the components via the Component Definition dialog in the library.Both methods work in that they produce an .swc, but neither adds the properties into the Component Properties.
I have here 2 options here of adding movieclips to a container, but I don't know which one is better. I want to know the pros and cons of each one. Also, What of the options is faster?. (i mean, which one uses less processor and memory resources?.
Option 1. Code: Select allvar container:MovieClip = new MovieClip(); stage.addChild(container); for (var i:int=0;i<10;i++){ var tank:Tank = new Tank(); //Tank is a movieclip in the library. container.addChild(tank); } MovieClip(container.getChildAt(2)).visible = false;
Option 2. Code: Select allvar container:Array = new Array(); for (var i:int=0;i<10;i++){ container.push(new Tank()); //Tank is a movieclip in the library. stage.addChild(container[i]); } container[2].visible = false;
I'm basically loading an XML file to assign instances of a movie clip a distinct value, which it uses to modify its height. So, I'm looping through the xml and instantiating my class Object each time (Rect) and then placing that Object into an array:
Code: function loadXML(loaded){ if(loaded){ var boxArray:Array; xmlNode = this.firstChild;
[code]....
the trace here always comes up undefined. "listPosition" in this bit is an Rect parameter, defined in the previous bit of code as "i", so I can keep track of the order of the stack.I've found one or two examples of putting objects into an array and getting them back out, but it doesn't seem to work with this, maybe because I'm using a class. I don't know.Could this be an area where I need to use the array access brackets, like around the movie clip the object is loaded into. I've tried everything I can think of -- referencing back to the movieclip, adding extra objectRef type parameters... nothing has worked yet.
i'm currently using a dictionary to associate a boolean to my (non-dynamic) sprites, but i would like to know if there is a smarter way of doing this? i could just use MovieClips to assign my properties instead of Sprites since MovieClips are dynamic, but i will not be using any of the MovieClip properties or functions so it comes down to a best practice issue. basically i want to create a state boolean property on my sprites - they are either on or off so my boolean variable is called isOn.
I tried rewriting Senocular's AlignmentProperties that alter the prototype of a MovieClip for AS1 and AS2 in AS3... (Basically it adds a top, left, bottom, right, centerY, centerX property to all MovieClips so you can align them regardless of their registration point)Now, I know you (senocular) say prototypes are not typically used anymore for AS3 but they are still there in case you need them. I think this utility could be pretty useful. What are your thoughts on how a property could be dynamically added to a class in AS3?[URL]trace(my_mc.top);// traces the top of a movie clip regardless of the registrationmy_mc.top=0; //aligns the top of a movieclip to 0 regardless of the registrationBut ran into a snag adding properties to a class via prototype.Here is my class...
On my stage I have 5 items labeled item1_mc, item2_mc, item3_mc and so forth...they all have two keyframes on their respective timelines, one labeled "active" and the other "inactive". My code contains 2 arrays, inactiveArray and activeArray and a variable known as energy that regularly goes to and from 0 - 100.What I am looking to achieve is basically the function of...if energy >= "insert given items 'active threshold' 20, 40, 60, etc..." then add it to the activeArray, if it is not, remove it and add it to the inactive array.
all objects in activeArray gotoAndStop("active"); all objects in inactiveArray gotoAndStop("inactive");
I have tried many different ways of achieving this effect but I always end up with duplicates and extras or something doesn't move when it's supposed to, where it's supposed to, it just ends up into a giant cluttered mess and I start from scratch.
I'd like to add event listeners to movieclips (already on the stage), whose names are called from an array one by one, into a for loop.
Code: // there are 4 movielcips on the stage with name a1 - a4. // create array var Bro:Array = ["a1","a2","a3","a4"]; // for loop for ( var i:Number = 0; i < 4; i++) { // Add event listener to array values to buttons. Bro[i].addEventListener(MouseEvent.ROLL_OVER, roll, false, 0, true); //execute this function on rollover function roll() { trace("why wont my arrays work in for loops"); }}
I have done this same thing in ActionScript 3, but am not familiar with ActionScript 2, which I am forced to use for this project. I am loading products into a SWF via XML and attempting to add a click event to each dynamically-created movieclip. Simply tracing the text from a node in XML will do for now. I'd like to assign a property called "desc" or "description" to each movieclip and have it trace that property's value when clicked. Here is the relevant portion of my code as it stands:
I am trying to add a image to the container but am having problems. The image variable is loading fine but not attinching itself to the empty MC I have on the container.
so i am having trouble with adding a box randomly on the screen. I have done this before and it seems like it should have a relatively easy solution. But alas, i have not been able to figure this out. This is the info: I have a box mc with exporting as Box. I have a Box Actionscript file with this code in it:
[Code]...
Nothing happens at all but there is no errors. Also i would like to keep everything in the classes.
On my previous post Adding a object randomly on the screen in as3 I explained the specifics of my situation. But I will go over it again. I have a box with a class(not my document class. I do have one called Main but this one is just an AS class referencing my box.) The classes name is Box and my MC box is exported as Box. This is the codethis is in my main file on the main timline
addEventListener(Event.ENTER_FRAME, createbox); var _box:Box = new Box; var boxlimit:int = 2;
I recieve the following error..Type Coercion failed: cannot convert Stinger@d8d43a1 to Array.[code]where laser.wielder is an Array that gets declared inside of the StingerLaser Class. As of right now, there is only one type of object I am trying to put into the the array. And that is stingerWhen trying to add an object that is type Stinger to an Array.[code]If no one can figure this issue out, atleast I would like to know how loose is an Array in actionscript? Can it take all types of classes or just classes that are of the same parent class or what?.
