ActionScript 3.0 :: Flash Verifying Mouse Over (not HitTestPoint)

May 15, 2011

Is there a way of verifying if the mouse is over an object like the MouseEvent class verifies, not by verifying with hitTestPoint? hitTestPoint calculates bases on the mouse coordinates, but I also need to know that even if the coordinates are over the object, there is not a second object over the target object.

View 1 Replies


Similar Posts:


HitTestPoint All The Way Or Check If Distance < Something First Then HitTestPoint?

Jan 1, 2011

Which one is more efficient? Or is there even a noticeable difference? I did tests of a circle moving closer to a square and stopping when hitTestPoint returns true. The square was at 0 and the circle was at 500. My first test I did using hitTestPoint the entire time, my second test I did by checking the distance (Pythagorean Theorem way) and if it's below 50 then check with hitTestPoint.

I compared the FPS of each test but they were the same at 30 FPS with 200 circles and at 11-12 FPS with 500 circles. I thought the first test would be slower because I was testing every pixel the entire time while the second test I was only calculating the distance for the most part before testing every pixel.

View 2 Replies

RegEx :: AS3 - Verifying All Letters In Two Words (True / False)

Mar 25, 2010

Need regular expression that will verify if all the letters in the word "cat" were also in the word "coating" in the proper sequence? So for the word "coating", the RegEx will test true for "cat" but false for "act".

View 2 Replies

Flex :: Verifying Presence Of Button From Super Component Class?

May 27, 2011

In Flex, lets say I have a super-class... something like:
class SuperComponent extends DragStack {
private var _childReference:UIComponent;
public function SuperComponent() {
// ???
addEventListener(FlexEvent.CREATION_COMPLETE, onCreationComplete);
} private function onCreationComplete(e:FlexEvent):void {
//The 'this[]' technique doesn't seem to work and causes run-time errors:
//trace("Component found: " + this["myButton"]);
}}

And then I make use of the following derived-class in my application (just a mockup MXML as an example):
<!-- Component ChildComponent.mxml -->
<mx:SuperComponent>
<mx:Button id="myButton" label="Press Me!" />
</mx:SuperComponent>
How do I go about verifying the presence of "myButton" from the SuperComponent class, and referencing it? Do I need to use getChildByName( ... ) ?

View 2 Replies

Flash :: Use HitTestPoint When A Movie Is Scaled?

Oct 20, 2010

Google says that[code]...

is the way to test for the mouse being over a DisplayObject. This works if my movie is displayed at 100% scale. But if maximise my browser window so the Flash movie changes scale, it all goes to pieces.

View 1 Replies

ActionScript 3.0 :: Flash HitTestPoint Not Detecting Collision

Jun 3, 2010

I am trying to use hitTestPoint to test whether the x/y coordinates of many circles are colliding with the pixels of another movie clip, but it is not working. It works fine when the ShapeFlag is set to FALSE, (circle detects the boundary box), but not when ShapeFlag is set to TRUE.I have spent hours trying to figure out what could be the issue, but to no avail.Class Ball - called by MAIN program multiple times to create instances of Ball and bounce them around the screen. If Ball collides with DQ (another MovieClip on stage), then it should stop moving:[code]

View 3 Replies

ActionScript 3.0 :: HitTestPoint Works In Flash But Not Browser?

Mar 7, 2011

I've been developing a game that uses hitTestPoint to determine a collision between an ball and a shape. This method has been working fine if I just test the swf in flash but as soon as it's embed in a browser the hitTestPoint stops function.

View 2 Replies

ActionScript :: Flash And Timeline - Place Tiles On Table (hitTestPoint Not Returning)

Aug 17, 2010

I am currently working on a project that involves dropping objects (scrabble letters) onto different cells in a table. My project also involved multiple levels. My layout is rather basic. I have a a bunch of tiles (25 letters) above a 2-columns table (left side for definition, right for answers). The table is static from frame 1 til the end (no keyframe, blankframe, etc.). The problem is as follows: The exercise starts fine with the first Level, then I click a button to access the next level, and so on... Going FORWARD on the timeline seems to be working OK, I am able to complete each levels in succession. However, if I decide to go backwards (replay a previous level) I can no longer place tiles on my table (hitTestPoint not returning what it should). I checked and my "target" is indeed there but somehow the hit test does not register.

[Code]...

View 1 Replies

Flash :: Using HitTestPoint With Stage Object To Create Object Boundaries

Dec 15, 2011

I'm trying to create a boundary for a player object, controlled with arrow keys, in my game using the main stage's height and width. For example, one test point is at the top edge of the player object's bounding box so that when the player object's head touches the stage's top edge, the player can't move anymore to the north. The player object is manually instantiated to the center of the stage by using the Flash stage editor so it will start at the center before the program starts.The problem is that right at the start of the program, I can no longer move the player object up or down with the arrow keys but I can still move it left or right. The intention is to allow the player to move north until the player object's head touches the top edge of the main stage.[code]

View 1 Replies

HitTestPoint Is Not Working?

Jun 15, 2010

I'm trying to make a simple platform shooter game, although I just cant seem to get jumping right. hitTestObject works fine, but hitTestPoint doesn't seem to work at all.[code]on that last bit, if I use hitTestObject instead, it works fine, but when i use hitTestPoint, I just fall through the ground as if nothing is there.and I want to use hitTestPoint so I can make floating blocks

View 2 Replies

ActionScript 3.0 :: Flash HitTestPoint - Error #1502: "A Script Has Executed For Longer Than The Default Timeout Period Of 15seconds.at Bullet / EFrame()"

Jan 30, 2011

I'm trying to set up a collision so that when a bullet hits a wall it is destroyed. Here is the snippet of code I am using: PHP Code:

[Code]...

This method works great for when detecting a collision between other moving instances and the walls, but for some reason with the bullets I get this error message when they almost touch the wall and Flash freezes and I usually have to restart it: PHP Code:

[Code]...

View 2 Replies

ActionScript 3.0 :: Why Is HitTestPoint Not Working

Jun 9, 2011

I'm probably missing something about which parameters I'm supposed to be passing.Here is the code:In the first class (the hitting object belongs to this class):[code]It always traces "Didn't work" when I drag the instance of the first class over the instance of the second class. What am I not understanding about the hitTestPoint function?

View 16 Replies

ActionScript 3.0 :: CacheAsBitmap And HitTestPoint?

Sep 19, 2011

Why does hitTestPoint isn't working on DisplayObjects that has cacheAsBitmap set to true?It does work, but it takes the Whole rectangle of Display object, not respecting wheather or not pixel is transparent or not (transparent pixels return true after hiTestPoint)

View 3 Replies

ActionScript 3.0 :: Cant Get HittestPoint To Work?

Jan 20, 2011

im trying to create a menu that drops down when you roll over it. however I cant get hittestPoint to work.I have a movieClip on my stage with a class attached. Inside this movieClip is another movieClip with an instance name of "hitBox"

ActionScript Code:
package {
import flash.display.*;
import flash.events.*;[code].....

Is it possibly to do with the mouseX and mouseY being local?

View 1 Replies

ActionScript 3.0 :: HitTestPoint Not Working Right

Nov 20, 2011

Anyone know why "hitTestPoint(character.x, character,y, true)" would be hit testing off the origin point in the center of the character, and not the whole shape??This is my code from my document class. There's a custom splat class in there, but don't worry about that. This code is inside 2(1 nested) for loops.[code]

View 1 Replies

ActionScript 3.0 :: HitTestPoint & Mouse_move?

May 19, 2009

I have been using hitTestPoint so far with mouse_move listener, which means if the mouse was stationary over target area when that listener was added the desired action wont happen until mouse moves.

Basically I have this window in the middle of the stage where loader loads pictures and when picture loads if the mouse moves over that window some other stuff appears.The listener is added after each picture is added and if the mouse was stationary above the loader when that happened it doesnt trigger hitTestPoint (until mouse moves).

I have seen somewhere this same effect, but it worked even if the mouse was stationary above the image when image appeared.

[Code]...

View 2 Replies

ActionScript 3.0 :: HitTestPoint Not Working?

Mar 3, 2011

I have the beginning of a game that looks a bit like Asteroids. The first version of the game worked, but was very code-heavy (every object was individually coded) so I decided to move the bulk of the code to document classes.

I wanted to have certain objects interact with eachother (bullets with asteroids, asteroids with ship, etc.) but they can't find eachother. Also, as you may notice in like a second from now, the whole code is handled by a single document. I guess I should do something about that as well?

Code:
package
{
import flash.display.MovieClip;
import flash.text.TextField;

[code]....

View 5 Replies

ActionScript 3.0 :: Multiple HitTestPoint With Arrays?

Mar 26, 2009

How would I change this to do a few test points,if (mydude.hitTestObject(myratarray[i])){

is it along these lines? if (mydude.hitTestPoint(myratarray[i].34,myratarray[i].12,true)){

View 2 Replies

ActionScript 3.0 :: Image Transparency And HitTestPoint?

Jun 26, 2011

I'm not sure this is even possible, but does anyone know how to get the hitTestPoint function to ignore transparency for a MC containing a png image?

View 1 Replies

ActionScript 3.0 :: HitTestPoint With Nested Object

Jun 28, 2010

Recently I was trying to use hitTestPoint with a nested movieclip against another non-nested one. Then if the nested movieclip was found to collide with the the registration point of the other movieclip (shapeFlag was set to true of course), the nested movieclip would move down by 1 pixel until it wasn't colliding.[code]What happens is that the while statement doesn't kick in until the registration point of obj3 is over obj2, but it doesn't break until obj3 is not over the bounding box of obj. Alternatively, if I change obj1.obj2.y to obj3.y it does stop at the correct spot.Actually I guess the problem isn't obj2 being nested in obj1, the problem still occurs when it's taken out of obj1.

View 8 Replies

ActionScript 3.0 :: HitTestPoint Stops A MovieClip

Nov 1, 2010

I have my two MovieClips and I both of them collide and the hitTestPoint works, but I want to make that one MovieClip will not be able to go on if that second MovieClip is in front of it but its can turn so that it to another side so that it can move.

View 0 Replies

ActionScript 3.0 :: HitTestObject / HitTestPoint Not Working Sometimes

Oct 8, 2011

Why does this happen ?

Code:

Main:
ActionScript Code:
import flash.events.Event;
import flash.events.MouseEvent;
import flash.display.MovieClip;

[Code].....

View 0 Replies

ActionScript 3.0 :: Change Code To HitTestPoint?

Mar 4, 2012

I've followed a tutorial and everthing works fine but I'd like to use hit-tests instead of the intersect-code. change the code so it works just the same with hit-tests.I dont get the same result.

View 4 Replies

ActionScript 3.0 :: HitTestPoint( X, Y, True); Implementation?

Jun 2, 2009

Testing this function and running it 11k times on a shape where I use:
 
shape.opaqueBackground = true;            shape.cacheAsBitmap = true;
 
Is extremely slow.. It seems to take 4 to 5 seconds to check a 101 x 101 tectangular area.I'm wondering how it is implemented...I know the code for the SDK is available?I can 'getPixel' from a bitmap to get the very exact color of that pixel in 1/1000 that time.If I happen to have the bitmap data.But with a shape that is already 'treated as a bitmap' (see above) using hitTestPoint  can stop your system. It should not be vastly inferior to work with Shapes than it is with bmp data..

View 3 Replies

ActionScript 3.0 :: HitTestPoint Inside A MC Not Working?

Aug 16, 2009

PHP Code:

//Move Enemies Events
function moveEnemies():void {
//Runs through every enemy stored in the array.
for(var c=0; c<enemyArray.length; c++) {

[code]....

View 11 Replies

ActionScript 3.0 :: While Loop & HitTestPoint Malfunction

Feb 15, 2010

[Code]....

This code serves the purpose of raising the character upon going up a hill. However, since the game will be on a large space (larger than the document size 1000x750) I am moving the ground (mc_Blockers) instead. This code is supposed to push the mc_Blockers down then it intercepts with the characters y. But instead, it just throws the character really high. When I examined it closely, it seemed to me that it threw the character up till the bounding box of the mc_Blockers (the whole stage is drawn, I'm not using blocks for floor, etc.).

View 1 Replies

ActionScript 3.0 :: HitTestPoint Trouble When Moving Root?

Jan 18, 2010

basically, I'm having trouble with the hitTestPoint method. As soon as I move the root of the swf, it no longer works as it should.To see what I mean, run this code:

Code:
package todd.test
{

[code].....

View 6 Replies

ActionScript 3.0 :: HitTestPoint - Hittest Doesn't Work?

Dec 30, 2008

I have this code so that when a spaceship goes through a blackhole it plays the spaceships moveiclip. This works fine on the first part of the code when the user just clicks the start button.However, i have put in a difficulty setting and when you change the difficulty setting the hittest doesn't work anymoreand there are no error messages. I have tried putting the blackHoles array in the difficulty function but nothing changes and i didn't really think this would make a difference as the easy function is already using the blackHoles array outside the difficulty function.

View 7 Replies

ActionScript 3.0 :: Get HitTestPoint Data As An Array Or List?

Oct 5, 2010

So, pretty much I have made a little flash app for a project at uni, and I have a tree which these little bat creates land onI have drawn the tree as a MC, and then use a hitTestPoint function to check wether the centre point of each bat character is touching the tree. If so land... blah blah pretty simple.Except I need to create a function that actually randomly spawns these characters on the tree. So to do this i would ideally have a get function that collects every x and y point on the and stores this data into a list

View 8 Replies

ActionScript 3.0 :: HitTestPoint And Defining A Range Of Values?

Sep 15, 2011

Is it possible to definine a range of values for the x or y parameter of hitTestPoint?

For example... hitTestPoint(100, rangeOfValues, false);

I've tried a few different things but nothing has worked so far.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved