I've been making a Flash animation in AS3 for quite some time now and I'm just about finished, except whenever I go to test it, it will always stop at a certain point. First of all, I definitely do NOT have a stop script there. It's 27 scenes long. It will always stop roughly 11 minutes and 10 seconds in. Why does it do this?
View 2 RepliesHow to develope a adrotator in flash, the animation will change randomly, when the user refresh his browser. Check [URL] for the similar functionality.....
View 1 RepliesI have a logo made of 28 circles which I need to animate using flash cs3...so far I have made the logo randomly animate using this There are two things I need to achieve...the circles on the stage start from the position they lay on the stagereturn back to those positions after say 45 seconds...
View 2 RepliesI am new to Flash and cannot get an FLA animation to stop on the last frame. I have inserted a blank keyframe with a "stop()" command, but this command stops the animation on a blank white frame (presumably the first frame of the animation).I am working with a rebuilt FLA file (i.e., decompiled SWF file) on the latest version of Flash. In addition to Actionscript, I have tried adjusting the Publish Settings (e.g., unchecking "Loop" and setting the Flash version to 7 or 8) and editing the embed parameters (as suggested in another answer on Stack), however neither of these efforts seems to make a difference.
View 1 RepliesI have three MCs set up and each one has a set of quotes in it. There is one quote per frame and what i'm looking to do is to have it cycle randomly through the frames when a button is pressed and then stop on a random frame after a certain time.
View 7 Replieswhat as3 code i should be using to make this happen.
I want the animation (shooting star) to play at random times.
What I have is a ninja star that spins around and moves based on the accelerometer of your phone. I created a balloon popping animation and have it all working well. The problem is that as of right now I can either have it be static and animate once the ninja star hits it, or I can have it randomly move and then play the animation which is not what I want. I want it like this: When the ninja star hits the balloon, the animation of it popping plays. And then once the animation is complete, then I want it to randomly move to a new position on the stage. (so the user can hit it again, and so forth...)
Here is my code so you can all take a look.
import flash.sensors.Accelerometer;
import flash.events.AccelerometerEvent;
import flash.events.Event;
var my_acc:Accelerometer = new Accelerometer();
my_acc.setRequestedUpdateInterval(50);
[Code] .....
I'm trying to get a looping matrix and then randomly stop. I am still pretty new to coding in flash. I still have not tried to put the random stop in but here is what I have so fare and it is not working.
var matrix_array:Array = Array("0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "a", "b", "c", "d", "e", "f", "g", "h", "i", "j", "k", "l", "m", "n", "o", "p", "q", "r", "s", "t", "u", "v", "x", "y", "z", "?", "<", ">", "!", "`", "@", "#", "$", "%", "^", "&", "*", "(", ")", "-", "+", "|", "/", "=", "_", ",", "[", "]", "{", "}", ":", ";");
function() {
[code]....
lets jsut say like were randomly moving a moveclip around how do i click on it and stop it?
View 3 RepliesI am working on an animated web banner. The specifications say that the animation must stop after 30 seconds but can resume on a mouse rollover. My animation is just a looping rotating circle created on the timeline. How can I get this looping animation to stop after 30 seconds? Also, is there a simple way to have the animation resume on a mouse rollover
View 2 RepliesI have created an opening animation for the webpage. It works well, a main movie loading in all the component parts, to keep the overall filesize down.Except this seems to cause me a problem: the animation sits in a normal html page, which has links to other pages. As the animation loads in, the little percentage checker ticking away in the corner, it is either impossible or at best slow whenever you click on any of the html links. It wants to keep loading the bits in rather than stop and do what the browser wants.IS there anyway of forcing the flash animation to stop loading?I notice on macromedia's site that most of there navigation is controlled by other flash movies, rather than html links, altho the html links do seem to interrupt the main animatin loading and then navigating on.
View 1 RepliesMy goal is to get a single stroke to animate randomly every time I open the animation. My code seems to be creating a new strokes during the animation causing them to stack on top of each other. This animation would work if only the previous stroke did not multiply.
[Code]...
the think is; in the main timeline im on the frame 1 (animation stoped here), i want to pass to frame 2 but first i play a MC, who is an animation of a black square who covers all the movie that goes from transparent on his own frame 1 going to full opacity in frame 5 and then transparent again in frame 9. Well i want to pass from main frame 1 to frame 2 when the MC animation is exactly on his own frame 5
View 1 RepliesI have created a short animation in Flash CS4 which has one button with a URL link. the button shows up on frame 217, and on that frame I added the following action script:
[Code]...
however, the 'hit zone' for the button shows up from frame 1 of the animation. is there a way of getting the hit zone to start when the button shows up?
when you go to the home.html page an animation will play from start and then stop at the end of it. However, for all other pages i.e contact.html aboutus.html we need the animation to skip to the end straight away and not to play the whole animation through. I was thinking this would be controlled by a variable or some kind of external text file ect. Basically in the first frame the actionscript needs to basically say
"if this html page is aboutus.html then go to the last frame and stop" and with the index page it would say "if this html page is index.html then keep playing"
I am using button navigation, and the only way I can get it to work is to use th stop command so the buttons are the only way to navigate. My problem is I need to add an animation and because it's jumping through the applet it isn't animating, I have an animation on a new layer, but it won't play or loop, is there anyway I can get this simple animation to loop constantly in spite of the stop commands in the other laters, I have to have an animation for the project to be valid.
View 4 RepliesI can't seem to get an animation to stop looping. The only code I see for it is:
next_bt.onRelease=function(){ gotoAndPlay("fx2") }
When I test the movie layer itself it just does it once. but when i test the whole movie it just goes on and on and on.
Trying to make an actionscript that will stop an animation if you are on a certain url. Using Joomla and have a flash banner. The banner plays on every page. What I want is for the flash banner to only play on the home page and not the others.
View 5 RepliesI was just playing around with some of the samples, examples snowflakes.The problem is that I want the snowflakes in Scene 1 and I dont want the snowflakes to keep on running to Scene 2.I tried putting stop(); to the action script, that didnt worked because I will not be able to go to Scene 2.
View 1 RepliesIn this code I was playing around with my movieclip. It animates but I am trying to get it to stop when the mouse is on the movieclip. It stops but it jumps back to the start position where I just want it to stop with out jumping back.
onClipEvent (load) {
move = true;
}
onClipEvent (enterFrame) {
[code]....
I have a product that I am showing call-outs on. Little dots that when rolled over trigers an animation and displays information about the feature. This in itself is no problem, I have seven of these set up as buttons that work when rolled over. However, the people I am setting this up for would like the animations to be on auto play when the user is not interacting with the flash piece within a greater page. I thought I could just build a movie clip with all of the animations compiled and let them run on a layer and then when a users curser came into view of the flash piece it would stop the movie and allow for the user to manually rollover the features.
View 2 RepliesOne slide of a slideshow I'm making I want the animation to end after it's completed without looping. I can do this by adding the stop(); command into the last frame of that slide, but if I return to that slide, it will remain in the end position instead of replaying.
View 4 RepliesI am creating a sort of "information slideshow" for a clients website where a movie clip on the main stage acts as a slideshow and when not touched by the users mouse it fades through 3 stages giving information on 3 different subjects, then when the user places their mouse over the movie on the HTML page the animation stops to allow the user to use the scroll bar on the right of the movie to scroll through the information on the subject, then when the user is finished then can move the mouse away from the movie and it will continue to play through as it did before.
i have the animation playing with the 3 seperate "states" and identical scroll-boxes for each state and im trying to think of a way to make the animation stop when the mouse is over it WITHOUT using a button, when a button is used on the top layer of the animation the scroll boxes are not useable as the button is on top of them, so i tried making a gap in the button to cater for them but then of course the mouse isnt over the button when the user goes for the scroll box and the "rollout" part of the script is activated and the movie continues to play. is there a way to make the animation stop prehaps when the mouse is over the "main automation" movie clip WITHOUT the use of a button, or what would be even better is when flash detects that the mouse is over the top of the actual .SWF itself it stops the movie.
I guess I did not finish my project yet. I have a script that will stop sound on click of the mouse, but I have a little animation running but I need to stop it with the same click of the mouse ( together with the sound) just insert stop() stop entire project and this is not good, this is a loader and it need to have ability to continue even some one shut sound of.
View 7 RepliesI created a simple animation that is 90 frames long. How can I start and stop it at specific keyframes so it takes 3 separate mouse clicks to complete. Example: a picture is on my website. When you click it, the first 30 frames play and then stop. A 2nd click makes the next 30 frames play and a 3rd click makes the last 30 frames play.
View 6 RepliesWhat I want to do is create a page that many other pages link to. This will be my index page. When it loads, the Flash movies play.But, when they return to this page after leaving it to go somewhere else on my site, I don't want the movies to play again.I thought of just having an HTML page that looks exactly like it and then linking the other pages to it, but, since there are a whole lotta pages that need to link to it, search engines might rank that dummy page more highly making it the landing page and then no one would ever visit the real index page with the animations. What to do? Here's a prototype of the page I'm talking about.
View 2 Replieshow can I stop my animtation at a certain frame. Is it only possible due setting up a timer, or can I also enter a code that stops at a certain frame? And when I stop the animation, will my buttons still be able to get clicked?
View 6 RepliesI have a banner that needs to play twice and then stop. Its 15 seconds and besides copying all the frames and pasting at the end to get this effect I want to do it with AS. Currently the animation is four mc's appearing at different frames in the main timeline. I figure using the if and else statements like if (should I create one movieclip for the entire animation and call it _mc_1) so if_mc_1 plays +++3 then stop?
View 1 RepliesI am producing a banner ad and I need to have this 15 second animation loop two times (for a total of 30 seconds) and then stop. If this does call for AS?
View 3 RepliesI have an animated movie clip (a man walking). I have created a tween with that clip, but when he stops at frame 30, I want the animated movie clip to stop, so it doesn't look like he's walking on the spot.
View 2 Replies