I have a logo made of 28 circles which I need to animate using flash cs3...so far I have made the logo randomly animate using this There are two things I need to achieve...the circles on the stage start from the position they lay on the stagereturn back to those positions after say 45 seconds...
View 2 RepliesI'm creating sort of a game in Flash, which requires invisible hotspots changing their position in time, relative to the stage. The question is: can I simply keyframe the hotspot position and have it work, or is there something that I should consider?
View 5 RepliesMy goal is to get a single stroke to animate randomly every time I open the animation. My code seems to be creating a new strokes during the animation causing them to stack on top of each other. This animation would work if only the previous stroke did not multiply.
[Code]...
I really like the new tweens and motion panel that Flash added in CS4 but I'm having some problems with them that I cant find a solution to.
1. When I animate or apply a preset animation it changes the position slightly. I do work where I need things positioned exactly where I put them. For example X:70 Y:210 but when I animate it might for example change it to X:70 Y:210.5 and to make it more confusing even if I animate a group of them at the same time it only does this to some things and not all. Also if I try to change the position back manually it doesnt always let me in the properties panel. I have to go to the Motion Editor and change it there frame by frame.
2. Similar problem to above but with the Alpha property. I want to animate things where it fades on and then stays up for a few frames and then animates back off. When I try to do this using the properties panel it doesnt always let me. So for example I need my alpha values to be in this order for the 4 keyframes. 0, 100, 100, 0. But for the 0 it might force it to 3% instead of the 0 I need. Again I can only fix this by going to the Motion Editor and adjusting it frame by frame.
how to prevent any two objects from overlapping each other each time they are randomly played?
i make them randomly appear using the code below but some of them appear on top of the other.
onClipEvent(load) {
_x=Math.floor(Math.random()*271)+120;
_y=Math.floor(Math.random()*265)+120;
}
I have three objects in library - instance obj1 obj2 obj3 I would like to randomly fill out the stage with those objects.
Can anyone tell me how to achive that with action script.
I'm trying to distribute 3 objects randomly on my stage but it's not working. My movie is 800x800.
[Code]....
I want to be able to return the number of specific movieclips on the stage.
For instance, i could have multiple movieclips like so on stage.[code]...
Is there a way to return the number of 'myMovie' movieclips that are on stage (4 in this example)? I guess this will involve using a 'for' loop and returning the number?
possible to create a button that will return the user to an exact postion on the stage? For instance, I want to create a back button at the bottom of the stage, and when someone presses it, it takes them to the top of the stage? I am using Flash CS4 on Windows.
View 3 RepliesI've put together this simple code for an SWF with three roll over images (called: Training, Resources and Contact).When I roll over Training I would like the symbol Training_txt to tween its alpha to 1 (from 0) and tween its y axis to 220 (from 83).When I roll out of Training I would like to run the two tweens in reverse.
This works fine for each of the three roll over images, so long as each tween is allowed to fully execute before a new tween is started. The problem arises if i quickly move the mouse curser between the three roll over images before the previous tweens have finished executing.In this instance, the tweened objects start to behave erratically. They usually return to their original position as per the roll_out tween but then start jumping between y axis 200 and y axis 83 (without tweening - they just appear).
Code below -
stop();
import fl.transitions.Tween;
import fl.transitions.easing.*;[code]..........
I'm creating sort of a game in Flash, which requires invisible hotspots changing their position in time, relative to the stage. The question is: can I simply keyframe the hotspot position and have it work, or is there something that I should consider?
View 4 RepliesOk. So there are serveral methods to implement Collision detection like R-trees, Quadtrees, BSP trees Recursive Dimensional Clustering (RDC). Or maybe more.My problem is that I have about 6-8 enemies on stage, some of them moving some of them static and also I have the Hero who is shooting with three types of missiles at same time. So I get about 70-100 objects on stage at a time.My question is, which algorithm to use for this type of problem, and which is the common practice? Also which is the most efficient?I was thinking of implementing Quad trees but I read that thy can be slow, or I am wrong?
View 3 RepliesI made a flash animation of a character walking, exported it as .swf, made sure it worked in the flash player, and imported it into After Effects. I used keyframes to map out where I wanted my character to walk. I played it back, first using space bar, then using 0, and my character didn't animate.
I didn't script anything. I was trying to follow these directions to create a walk animation[url]...
At step 4 the guy said, " I won't delve into how to create each frame of the cycle because for one thing, you can have a look at the fla. that I enclose at the end of the tutorial, and for another it's not that hard. I'm sure you can do that!" I didn't download his project because I already know how keyframes work, I knew what I needed to do to make my animation walk the way I wanted it to walk. From there I right clicked on the movie clip, clicked "Export SWF...", and named it.
How can I can I get my character to animate when I preview my work in After Effects? Was there something I should have done while in Flash to make it work in After Effects?
I'm currently making my own 2D shoot' em up and I've created a simple enemy spawn state machine which allows the game to automatically keep spawning/creating new enemies on the stage. Before I had this spawn loop machine/code set up, I had only one single enemy which was already on the stage to test the gameplay of my game and the enemy as set up tween object using tween animation. I'm wondering if its possible to add/able tween animation on all new created enemies as appear on the stage giving them movement/ai? This is possible? I've experimented with some code, I'm failed to succeed withs such functionality, I just wondering where I am going wrong or if anyone knew of any alternatives to my approach?
[Code]...
I am using SWFOBJECT to embed my flash content. I have been worried about stage.stageWidth and stage.stageHeight returning 0 in Firefox/Internet Explorer; this problem is referred to in question #21 on the SWFOBJECT FAQ [URL]..I have been told that this problem is particularly prevelant on Macs. The SWFOBJECT FAQ (question 21) indirectly suggests that this problem does not occur with static publishing. Is this correct? Is it still advisable to implement a solution to this stageWidth/stageHeight problem, even if you are using static publishing?
View 1 RepliesHow to develope a adrotator in flash, the animation will change randomly, when the user refresh his browser. Check [URL] for the similar functionality.....
View 1 RepliesI've been making a Flash animation in AS3 for quite some time now and I'm just about finished, except whenever I go to test it, it will always stop at a certain point. First of all, I definitely do NOT have a stop script there. It's 27 scenes long. It will always stop roughly 11 minutes and 10 seconds in. Why does it do this?
View 2 RepliesI am developing a mini flash game. Player control character and move left and right to collect money coin. There are 5 points that money and bomb release and move from top to bottom. When character collide with money then increase money else hit bomb age increase by 1. Once the age is 99, the game is over and the money is the final scores
Here is my code:
package Class {
import flash.events.Event;
import flash.events.KeyboardEvent;
import flash.events.MouseEvent;
import flash.media.Sound;
[Code] .....
This is my Game:
Currently, the bomb and money random appear X, 100 with 15 money and 10 bombs in a screen.
What I want is, how to amend it become money and bomb appear from specific point, after that the money and bomb when hit the wall will bounce back.
An example similar game play with my game is [URL].
I have images which I have been broken to resize them to suit my design. What happens is that every now and then when I re-enter my flash movie these images turn red and I have to do the whole image imputing and breaking apart process once more.......
View 4 RepliesHow can I make my Array to return a randomly value? I want AirUnit to return a value between 1 and 3. I want LandUnit to return a value between 4 and 6. I want WaterUnit to return a value between 7 and 9.
View 1 Repliesim trying to create a flash file that is randomly showing different objects/images, i believe i have the correct codes although i have encountered an error.
[Code].....
I am trying to animate a circle from a position to another, but the speed is like "easeIn" twining animation. The moving speed start high and ending a smooth slow animation like easing. I know It can be done thru easing. but its not helping to my animation which i am doing currently. So pls someone help to do this by "EnterFrame" event.
Circle starting position : 10 px
Cricle Ending position : 500 px
Starting Speed : 20px /per sec
Ending Speed : 1 px / per sec
So what will be the speed in middle of somewhere ?
Ive been messing around with Tweenlite recently and love it. However there seems to be an issue how you can set which movieclip you are animating, for example to animate a movieclip from one position to another you would simply have: TweenLite.to(mc1, 1, {_x:220, _y:220}); However Im simply trying to replace the movieClip with a variable which changes like this: TweenLite.to("mc"+i, 1, {_x:220, _y:220}); Where 'i' is incrementing as normal. This in effect should produce mc1, mc2, mc3........and so on but it doesnt??? Anyone have anything they could share with me into why this wont work?
View 3 RepliesI'm trying to play some sounds in my flash project through action script. However for some reason in my code the call to Sound.play takes from 40ms to over 100ms in extreme cases, which is obviously more than enough to be very noticeable whenever a sound is played. This happens every time a sound is played, not just when that sound is first played, so I dont think its because the Sound object is still loading data or anything like that...
At the start I have this to load the sound:
class MyClass
{
[Embed(source='data/test_snd.mp3')] private var TestSound:Class;
private var testSound:Sound;//flash.media.Sound
[Code].....
This as far as I can tell is following the same process as other Flash programs I found, however none of them seem to have this problem. Is there something that I've missed that would cause the play() method to be so slow?
how to randomly animate circles moving around inside a bigger circles? the small circles will have a collision effect on each other and on rollover of each individual circle, the name of it will come out in the bottom.. so the big circle will act as a wall preventing them from coming out..
View 1 RepliesI hv make a movieclip it's linkage name is thumbmc,I make its duplicate instances 10 times and load external thumbnail jpg's,I give names to these instances to th0... th9, all events and effects working fine but i m opening a large image while clicking on any thumb..the problem is.. i want when i click on any thumb then all thumbs will be fly and goes out of screen,, but when i try to tween then it shows error.. th0 object not found.......
code is like this
// Making thumbs by this code
for( var i:Number=0;i<9;i++ )[code].....
I hv make a movieclip it's linkage name is thumbmc, I make its duplicate instances 10 times and load external thumbnail jpg's,I give names to these instances to th0... th9, all events and effects working fine but i m opening a large image while clicking on any thumb..the problem is.. i want when i click on any thumb then all thumbs will be fly and goes out of screen,, but when i try to tween then it shows error.
code is like this
// Making thumbs by this code
for( var i:Number=0;i<9;i++ )
[code].....
I have a movie with on stage three rows of three movieclips, so 9 in total. I would like to change their positions randomly (time interval function) to x- and y-coordinates in the way that they "shuffle" each time. So for example, mc01 changes position to the positions of mc08, while mc08 goes to another position etc. So 9 changes to fixed coordinates eacht interval.
View 5 RepliesI have always animated objects using an Enter Frame event (ie. slide it 5 pixels to the right every frame). I am seeing many companies I work at using the TweenLite tweening engine to animate objects. Is there some special magic these tweening engines do that makes them better? If I wanted to side a ball across the screen over a time span of 100 frames, would using an Enter Frame be any different than using the tween engine? Or would they have the exact same result?
View 1 RepliesI want to make the clown dance when he catches a hat (I have a tween for that) who otherwise will be simply standing, Basically I need to animate objects on certain events and then stop, I see so many game makers doing that, I know nothing about it, tried a lot on my own but with no success
View 3 Replies