how can I stop my animtation at a certain frame. Is it only possible due setting up a timer, or can I also enter a code that stops at a certain frame? And when I stop the animation, will my buttons still be able to get clicked?
View 6 Repliesi'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 RepliesI am new to Flash and cannot get an FLA animation to stop on the last frame. I have inserted a blank keyframe with a "stop()" command, but this command stops the animation on a blank white frame (presumably the first frame of the animation).I am working with a rebuilt FLA file (i.e., decompiled SWF file) on the latest version of Flash. In addition to Actionscript, I have tried adjusting the Publish Settings (e.g., unchecking "Loop" and setting the Flash version to 7 or 8) and editing the embed parameters (as suggested in another answer on Stack), however neither of these efforts seems to make a difference.
View 1 RepliesI have an animated movie clip (a man walking). I have created a tween with that clip, but when he stops at frame 30, I want the animated movie clip to stop, so it doesn't look like he's walking on the spot.
View 2 RepliesOne of my school projects require that we make use of button in a small flash animation but the teacher has only taught us how to create buttons but not add script to them. My question is how can I make the animation stop on frame 1 as soon as it loads up and how can I add code to my play button so I can play from frame 2. Most of the code I found end up being in Actionscript 2 or something or just didn't seem to work at all.
View 3 RepliesI am new to ActionScript 3.0. I am trying to create a button that will jump ahead to a specific frame, let the animation run, and then stop before reaching a specific frame. I have the first part working:
button1.addEventListener(MouseEvent.CLICK, buttonHandler);function buttonHandler(event:MouseEvent):void { gotoAndPlay("25");}
Once I get to frame 25, the animation will start. But I want to stop the animation at frame 49. How would I do this?
I have a project which consists of 4 frames (+ one starting frame), where each frame contains a Timer class based-animation. You can visit each frame by selecting the appropriate button.
Let's say the animation in frame1 lasts for a total of 30 seconds, but I'm too impatient to watch it and decide to go frame2, which also I don't like. In the background however, the animation for frame1 is still running, for when I go to frame 2 and go back to frame1, the animation starts both from the beginning and also continues to play from where I left off.
I also get an error:
TypeError: Error #1009: Kan geen eigenschap of methode benaderen via een verwijzing naar een object dat null is.
at fl.transitions::TransitionManager/saveContentAppearance()
at fl.transitions::TransitionManager/set content()
at fl.transitions::TransitionManager()
[Code]...
My objective is to paste together several ( a lot, actually ) armature animations, each in a separate symbol.I have no idea how to do it, armature layers are a bit... strange. So i see only one solution: convert it to a regular layer.
View 1 Repliesso I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
I'm still struggling with going from a loaded swf to the next frame in my timeline, where a new swf file will be loaded.Ths is my current code which is trying to move onto the next frame in my timeline is located at the end Frame of a 10 second animation:
[Code]...
I am making a frame by frame animation, where I draw a character, make a new frame and use the onion skin to slightly move my character. Is there a way to make a certain part faster than others? I made a character prepare to kick someone, but since i was doing it frame by frame it looks slow. So instead of taking out frames and making it look choppy, how do I make a certain part faster or increase its FPS? I tried making a new scene and changing its FPS, but that still changes the overall FPS.
View 6 RepliesI have an problem whereby I have created a Frame by Frame dancing human figure and now I want to move it across the screen as well as scale it using a Tween.
I have spent quite some time slightly adjusting the upper arms, forearms, hands, legs etc and creating a new keyframe for each movement. All the movements are all in one layer... ie the forearm doesn't have it's own layer etc. I am running the animation at 24fps so there is quite bit going on.
I now realise that I should have created a symbol/movie clip from the first image I created and then scaled and moved the image first before animating it's limbs but I only realized that after hours of work and I would hate to start all over again.
So basically what I have is a dancing human figure in the one spot moving it's arms and legs and I want it to move across the screen and become larger by scaling it using a Tween. I could of course re-edit each keyframe by slightly scaling and the slightly moving the figure but that will take quite some time to get right as there will be a fair bit of trial and error doing it that way.
I have a project that involves flash animation- almost movie like. I need some advice on how to do flash animation. I think I'll create the graphics in illustrator. Basically, the storyline is this:
- guy leaves house and walks to car
-starts engine, puts on shades and speeds off
-scenes of downtown chicago (nightlife)
-view license plate
What is the best way to do this? create graphics in illustrator for frame by frame? Should I use after effects? The client doesn't have a high budget so video is out of the question.
I created a frame by frame animation using the default elapsed time. There are 41 frames, and it is completed in 1.7 seconds. I would like the whole sequence to complete instead within 30 seconds. How can I change the timing? I am using Adobe Flash CS4 Professional (v. 10.0.2).
View 1 RepliesI am developing a game for the Android platform using flash cs5 and AS3.
problem: the game will run at 24-29 fps until I call a movieClip that has frame by frame animation, then it will drop to 10-14 FPS. It looks perfect on my PC and does not lose frames until I move it to my Evo for testing. I have tested on an Epic also and I do not lose Frames which leads me to believe that it is the pixil population in the evo that is causing the problem but I have tried everything I can think of to not make it so intense on the graphics but same results every time.
It's a 20 frame animation and my FPS in flash is set to 24
What I have tried:
png's on each frame |
gif's on each frame |
[Code]....
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 RepliesI have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 RepliesIf I removeChild frame animated Movieclip, will it automatically stop running the frames inside it? Actually without calling mc.stop();
View 2 RepliesI have 5 frames in which a different song will be playing, this is the code i used on each frame:
var mySound:Sound = new Sound();mySound.load(new URLRequest("frameone.mp3"));mySound.play();
If im on frame 1 and click on the navigation button to see frame 2, both songs on these frames play simultaniously. how can i stop the background song on frame 1, and have frame 2 playing?
why my "nieuws.swf' is not going to frame 2 or not showing at all when i press the button with the second piece of code on it? The nieuws.swf has a stop on frame 1 and on frame 2. I can see it right away when i take away the first stop. I use the function playNieuws, to make it all happen.
[Code]....
1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage
this.movieClip.gotoAndPlay("2"); //NOT WORK
this.movieClip.gotoAndPlay(2); //NOT WORK
[code].....
Using MX 2004. I would like to play the entire movie twice, then start playing a third time until frame 30 and stop.
View 1 Repliesat first, I thought I could manage this myself searching the forums about "preloader" but none of the solutions seem to work. I think it has to do with the fact that I'm using the FLVPlayer with an external file. What am I looking for?
1. Well, the preload code for frame 1 that makes sure the external F4V (movie.f4v in the same dir) is loaded 100% before it jumps to frame 2 where the movie should start playing...
2. If possible, a progress bar.
I want my MovieClip to play from frame 5 to frame 30 and then stop. How can I do this?
View 5 RepliesI'm working on a Flash CS5 file, with action script 3. I have a layer with all the audio for each frame. When I click the Next button, the audio from the last frame plays over the audio of the current frame. The only code I have in flash is:
stop()
btn2.addEventListener(MouseEvent.CLICK� forward);
function forward(event:MouseEvent) {[code].....
I know I can export a simple tweened animation using "Copy Motion as Actionscript 3.0" and passing the resultant XML to an Animator object. But what I'd like to do is export a frame-by-frame animation and use that in my code.
As for why I want to do this, I'm trying to simulate a post-it being ripped off of a white board. Doing it and getting it to look natural using just code is going to be difficult, so I was thinking of having a designer at my company do a frame-by-frame animation of it and then using that.
wondering if this is possible. I have a button and want it to play from let's say frame 10 to frame 15I'm starting with this:
on (release) {
//Movieclip GotoAndPlay Behavior
this.gotoAndPlay(10);
[code].......
I am using button navigation, and the only way I can get it to work is to use th stop command so the buttons are the only way to navigate. My problem is I need to add an animation and because it's jumping through the applet it isn't animating, I have an animation on a new layer, but it won't play or loop, is there anyway I can get this simple animation to loop constantly in spite of the stop commands in the other laters, I have to have an animation for the project to be valid.
View 4 RepliesI have been using a template from the Adobe Flash Professional CS5 from Media PlaybackSimple Photo Album.I added 15 frames and and used the built in Action and Playback buttons (3 buttons. What i want ot do is make it look like the Controller as seen below.I would like the movie to be able to be controlled frame by frame, go to the beginning etc. just like the controller. I am having a hard time understanding what to do. I have added buttons but when i do it flips out and scrolls through the frame by frame without stopping.
View 4 Replies