ActionScript 3.0 :: Delay A Function Call?
May 24, 2009
my code is as below, i want the "showSavingScores()" function to appear longer, because i want to show to the player their score is saving.... the problem i facing now is the "showSavingScore()" only appear less than 1 sec the player is unable to see the saving messaga?
Code:
urlLoader.addEventListener(Event.COMPLETE, finishedSavingScore);
urlLoader.addEventListener(IOErrorEvent.IO_ERROR, failedSavingScore);
urlLoader.load(urlRequest);
showSavingScore();
View 1 Replies
Similar Posts:
Mar 16, 2010
I'm trying to make a timer..
When I press a button a movieclip does this: gotoAndStop(2);
I want it to go back to Keyframe 1 after 10 seconds.
How can I get this to work?
View 6 Replies
Mar 11, 2011
I've written some code that ads a number of movie clips from the library to the stage with a loop. Each clip has a function that makes the clips visible and animates them in. Previously this works fine, I add the clips which sit on screen invisible until the activate function is called - it works fine. However, if I add the clip dynamically and call the function in the same block of code it doesn't work. I've added 'trace' code to the function being called to see if it activates but it doesn't.
I'm guessing the function doesn't become available immediately, perhaps not until the next frame and I've also noticed this problem with timeline based graphics - they have to be added a frame earlier than when a function they contain is called.
Here's my code:
for (i=0; i<4; i++) {
attachMovie("nomCirMC","tCir"+i,i+500);
targ = eval("tCir"+i);
[Code]....
View 7 Replies
Jun 22, 2009
I'm trying to use ExternalInterface.Call to call a JavaScript function to launch a lightbox window. So far I have this:
AS3:
flash.external.ExternalInterface.call("launchLB", "" + aUrl + "");
JavaScript:
function launchLB(url) {
alert(url);
[Code]....
I get the alert but I can't get the lightbox window to display. When my as code makes the ExternalInterface call I get what looks like a page refresh and a blank browser window.
View 1 Replies
Jan 7, 2008
I have an enterFrame action that I use on a graphic:
[Code]....
Because I want to use the above code more than a few times, I tried to make it a function.
[Code]....
But for some reason the function call does not work when I call it via an action on a graphic where initially the code worked when it was explicitly written and not called as a function.
Code:
onClipEvent (enterFrame) {
fadeOut();
}
View 3 Replies
Sep 25, 2009
why this is not working.I have an application with a new class I just created. The class loads, but will not call it's own internal function.
package com.parkerandkent.components.classic.photogallery {
import caurina.transitions.Tweener;
import flash.display.MovieClip;[code]....
"Test 2" will not fire here.And I get this error message:
CallTag.as , Line 10 1180: Call to a possibly undefined method init.
View 4 Replies
Nov 4, 2010
I need to get a javascript var in my Flash application. I like to be able to just set a variable in the javascript (client constraints) rather than define a function.
Can this be done? I am trying to use the ExternalInterface.call()
AS:
ExternalInterface.call("function(){return window.someVar}", null);
JS:
var someVar = "Test";
This does not work and I suspect it is because the ExternalInterface.call() does not like the anonymous function.
View 2 Replies
Feb 10, 2011
I have a function defined in JavaScript like so:
function fadeBack() {
alert("fadeBack called");
};
I call that function from my Flash file like so:
import flash.external.*;
flash.external.ExternalInterface.call("fadeBack");
This works in both Safari and Chrome, but for some reason Firefox won't ever call the function. Still, I can't figure this out. How can I fix it?
View 2 Replies
Feb 3, 2009
Does anyone know if there is a way to call a dispatchEvent call from inside of a static function?
View 2 Replies
Oct 13, 2002
have a node that has an asfunction embedded - won't work. if I change the a href to a web page- it works fine. If I try to call a custom function it doesn't call it at all.
View 1 Replies
Aug 10, 2010
I am trying to alpha-tween some text, in a sequential order, something like movie titles, where text appear one after the other, by fading in, and fading out. This is my piece of code and what i am basically trying to do, is to run the first block of functions, after the other, so i can display the first movie clip, and the after it fades, display the second movie clip and so on.... The problem is that both movieclips fade in at the same time..I have tried to add a function after the constructor, that would look something like this:[code]
View 5 Replies
Dec 23, 2003
how do I put a delay in my function, i want it to attach the ball, then wait 10 milliseconds, then attach another, how would i go about doing this, heres my code:
function attach() {
for (i=0; i<40; i++) {
repeat = attachMovie("ball", "ball"+i, i);
repeat._x = ((i*3)+30);
[code]....
View 2 Replies
Jan 31, 2011
I have a function in Flex which has three function in it.
public function update():void
{
A(); \Dispatches a event with Remote Call
[code].......
View 1 Replies
Dec 13, 2009
I need to use some sort of delay function and I don't know if there is one
like: sleep(milliseconds){
action
}
or something like that.
View 5 Replies
Nov 9, 2005
I'm not getting any takers over in the Flash 8 forum.I am using the snow method wonderfully created here on Kirupa and have a quick question. Currently, the movie just starts with a screen full of snow. I'd like to get it to start off screen and fall in. Basically setting an initial state for the ._y of 0. I also can't seem to get a delay working for the function.[code]
View 4 Replies
Oct 30, 2009
I have a file in which I use this stage resize function. However if I resize really fast (like maximize button) it doesn't resize the Timeline.
Code:
stage.addEventListener(Event.RESIZE,resizeStage);
private function resizeStage(e:Event):void{
resetVideo();
_controlbar.resetControlBar(stage.stageWidth);
_barlength = _clickbar.width;
_levelstart = _level.x;
[Code] .....
View 2 Replies
Jun 25, 2010
I have a number of cases where I have a tween happening in ActionScript, but I would like it to happen after a delay from the event that triggers it. At the moment I'm creating this delay by having a tween that does nothing (eg. an "_x" tween for which the start and end points are the same) and then using tween1.onMotionFinished = function(){to create the one I really want. Is there a way to create this delay more neatly?
View 1 Replies
Feb 2, 2010
I'll try express this as easily as I can: I have an input text box (call the instance whatever you want). What it does is when you type a word, it makes another movie clip (let's say the instance is MORPH) go to a certain frame. The code is simple, but I'll give it to you to give you a better idea:
[Code].....
check is just a light that turns green if the word is complete, so ignore that. Whenever the MORPH object goes to, say "Earth", it plays an animation and afterwards, it hit's a gotoAndStop(1); code, stopping it at the first frame. What the problem is, say, you type earth, it goes to the EARTH animation, but before the animation finishes and goes back, you type EARTH again and it skips straight to the start of the animation. It looks very rough and bad.
What I want is, say I type Earth and the animation plays, and before it finishes the animation, and I type EARTH again, it waits until morph get's back to frame 1. So yeah, to delay a function until a certain frame is reached. Oh, and another thing. Is there a way to make a button click with AS2? Pretty much when it makes contact with another object, it... clicks (whatever it does to reach the DOWN frame and stay there until the other object moves off).
View 9 Replies
Aug 31, 2009
I'm trying to put a delay or timer inside of a function, ie:
Code: Select all
this_btn.addEventListener(MouseEvent.CLICK, doThis);
function doThis(event:MouseEvent):void
{
[Code]....
So that where I have the function for the button make that movie clip go to frame 1, it would wait one second before going to frame 1.
View 2 Replies
Mar 20, 2007
A couple weeks ago, I was searching for a delay function that I could put on a frame and it would hold at that frame for a given period of time.I came close to finding it, but what I found used setInterval and I wasn't able to stop it from looping.Here is something that I am quickly starting to love, it's not mine, but I don't know who's it is, it was on a piece I was working on at work (although this edition of it is partly mine, as I have adapted it to my specific needs).first frame
Code:
//wait function
function wait(a) {
[code].....
View 2 Replies
Apr 15, 2011
I am trying to add a delay function to a btn action in actionscript AS2. I want to delay the gotoAndStop function.I want the attachMovie("glamour", "glamour2", 202); to play in full before the gotoandstop action say for about 3 secondsI want to be able to delay for as long or short as needed?below is the snippet of code for the btn im working with?
Code:
timer=0
btn.onRelease = Delegate.create(this,buttonHandler);
[code]......
View 1 Replies
Aug 16, 2009
I'm trying to load a .swf into a containerMC with a button action. I want it to delay the loadMovie action for 1 second to allow an out animation to finish playing. The buttons (next and back) are in a MC on the main timeline of the swf.
I have this code in 1st frame of main timeline:
_global.nextMC = function() {
_root.containerMC.loadMovie("images/folio/chevron.swf");
};
[Code].....
I feel like I'm close, but probably just am missing something here in my setTimeout syntax.
View 2 Replies
Jul 26, 2011
Im currently working on a script which will dynamically create letters and then play the sound of each letter.
I can get the script to work but for some reason it doesnt seem to play the 1st sound the 1st time I click on the button to exectute the function.[code]...
View 0 Replies
Jul 6, 2005
I just want to have my code wait a couple seconds to let some scripted animation finish then load a movie into a holder but I can't seem to find a pause/wait/delay function is there one and how would I use it or can someone tell me how to do it somehow thats not too processor intense if at all possible.
View 6 Replies
Feb 21, 2006
I'm trying to delay a function which then sets the onEnterFrame of a clip The colde I am trying will not work
[code]...
View 2 Replies
Jan 29, 2003
is it possible to write a function to move an object and then call that function on a clip event for instance
function (bounce){
script;
script;
}
and then call it by saying
on(mouseOver){
this.bounce;
}
View 2 Replies
Jun 23, 2009
is it possible to store a list of params needed for a function in an array and then use that in a funciton call?
[Code]...
or something like that?? Prob have to iterate the array but how do i get the params into the function call? Is this even possible?
View 6 Replies
Jun 16, 2010
How create baseurl function in flash and how i call that function in button script
View 1 Replies
Feb 28, 2008
I have this code but I cannot work out how to fill in function parameters based on an array and it's length, see line 7
[AS]
import com.robertpenner.easing.Cubic;
MovieClip.prototype.framesTimeout = function(func:Function, frames:Number, args:Array) {
[code]....
Is it possible to call a function and fill in the parameters based on an array and it's length?
View 1 Replies
Jan 10, 2012
I have an AS3 program that calls a function multiple times. The function must return multiple variables, so I created a class for the function to declare an object containing all of these variables. For example, here's my class:
package
{
public class PER
{
[Code].....
Let's say the calling program calls the function, which returns the variables into data_set1 (where data_set1 depends on input variables arg1, arg2, arg3) using:
var data_set1:PER = function_name(arg1, arg2, arg3);
The calling program does some stuff, then calls the function again, but returns the variables into a new variable name, data_set2:
var data_set2:PER = function_name(arg4, arg5, arg6);
My intention is that data_set1 and data_set2 are different (e.g. not linked together).
My question is, given that arrays are passed by reference, will data_set1 be modified to agree with data_set2 upon the 2nd function call? Why or why not?
View 1 Replies