how do I put a delay in my function, i want it to attach the ball, then wait 10 milliseconds, then attach another, how would i go about doing this, heres my code:
function attach() {
for (i=0; i<40; i++) {
repeat = attachMovie("ball", "ball"+i, i);
repeat._x = ((i*3)+30);
[code]....
I am trying to alpha-tween some text, in a sequential order, something like movie titles, where text appear one after the other, by fading in, and fading out. This is my piece of code and what i am basically trying to do, is to run the first block of functions, after the other, so i can display the first movie clip, and the after it fades, display the second movie clip and so on.... The problem is that both movieclips fade in at the same time..I have tried to add a function after the constructor, that would look something like this:[code]
View 5 RepliesI need to use some sort of delay function and I don't know if there is one
like: sleep(milliseconds){
action
}
or something like that.
I'm not getting any takers over in the Flash 8 forum.I am using the snow method wonderfully created here on Kirupa and have a quick question. Currently, the movie just starts with a screen full of snow. I'd like to get it to start off screen and fall in. Basically setting an initial state for the ._y of 0. I also can't seem to get a delay working for the function.[code]
View 4 Repliesmy code is as below, i want the "showSavingScores()" function to appear longer, because i want to show to the player their score is saving.... the problem i facing now is the "showSavingScore()" only appear less than 1 sec the player is unable to see the saving messaga?
Code:
urlLoader.addEventListener(Event.COMPLETE, finishedSavingScore);
urlLoader.addEventListener(IOErrorEvent.IO_ERROR, failedSavingScore);
urlLoader.load(urlRequest);
showSavingScore();
I have a file in which I use this stage resize function. However if I resize really fast (like maximize button) it doesn't resize the Timeline.
Code:
stage.addEventListener(Event.RESIZE,resizeStage);
private function resizeStage(e:Event):void{
resetVideo();
_controlbar.resetControlBar(stage.stageWidth);
_barlength = _clickbar.width;
_levelstart = _level.x;
[Code] .....
I have a number of cases where I have a tween happening in ActionScript, but I would like it to happen after a delay from the event that triggers it. At the moment I'm creating this delay by having a tween that does nothing (eg. an "_x" tween for which the start and end points are the same) and then using tween1.onMotionFinished = function(){to create the one I really want. Is there a way to create this delay more neatly?
View 1 RepliesI'll try express this as easily as I can: I have an input text box (call the instance whatever you want). What it does is when you type a word, it makes another movie clip (let's say the instance is MORPH) go to a certain frame. The code is simple, but I'll give it to you to give you a better idea:
[Code].....
check is just a light that turns green if the word is complete, so ignore that. Whenever the MORPH object goes to, say "Earth", it plays an animation and afterwards, it hit's a gotoAndStop(1); code, stopping it at the first frame. What the problem is, say, you type earth, it goes to the EARTH animation, but before the animation finishes and goes back, you type EARTH again and it skips straight to the start of the animation. It looks very rough and bad.
What I want is, say I type Earth and the animation plays, and before it finishes the animation, and I type EARTH again, it waits until morph get's back to frame 1. So yeah, to delay a function until a certain frame is reached. Oh, and another thing. Is there a way to make a button click with AS2? Pretty much when it makes contact with another object, it... clicks (whatever it does to reach the DOWN frame and stay there until the other object moves off).
I'm trying to put a delay or timer inside of a function, ie:
Code: Select all
this_btn.addEventListener(MouseEvent.CLICK, doThis);
function doThis(event:MouseEvent):void
{
[Code]....
So that where I have the function for the button make that movie clip go to frame 1, it would wait one second before going to frame 1.
A couple weeks ago, I was searching for a delay function that I could put on a frame and it would hold at that frame for a given period of time.I came close to finding it, but what I found used setInterval and I wasn't able to stop it from looping.Here is something that I am quickly starting to love, it's not mine, but I don't know who's it is, it was on a piece I was working on at work (although this edition of it is partly mine, as I have adapted it to my specific needs).first frame
Code:
//wait function
function wait(a) {
[code].....
I am trying to add a delay function to a btn action in actionscript AS2. I want to delay the gotoAndStop function.I want the attachMovie("glamour", "glamour2", 202); to play in full before the gotoandstop action say for about 3 secondsI want to be able to delay for as long or short as needed?below is the snippet of code for the btn im working with?
Code:
timer=0
btn.onRelease = Delegate.create(this,buttonHandler);
[code]......
I'm trying to make a timer..
When I press a button a movieclip does this: gotoAndStop(2);
I want it to go back to Keyframe 1 after 10 seconds.
How can I get this to work?
I'm trying to load a .swf into a containerMC with a button action. I want it to delay the loadMovie action for 1 second to allow an out animation to finish playing. The buttons (next and back) are in a MC on the main timeline of the swf.
I have this code in 1st frame of main timeline:
_global.nextMC = function() {
_root.containerMC.loadMovie("images/folio/chevron.swf");
};
[Code].....
I feel like I'm close, but probably just am missing something here in my setTimeout syntax.
Im currently working on a script which will dynamically create letters and then play the sound of each letter.
I can get the script to work but for some reason it doesnt seem to play the 1st sound the 1st time I click on the button to exectute the function.[code]...
I just want to have my code wait a couple seconds to let some scripted animation finish then load a movie into a holder but I can't seem to find a pause/wait/delay function is there one and how would I use it or can someone tell me how to do it somehow thats not too processor intense if at all possible.
View 6 RepliesI'm trying to delay a function which then sets the onEnterFrame of a clip The colde I am trying will not work
[code]...
Okay my_btn will do this;
image_loader1.loadMovie("imagepath");
gotoAndPlay(frame#);
What i want to do, is, make it wait before it the timeline goes to the certain frame#, so the image_loader1 loads its image1. I'm making it wait, not because it takes time loading (which it would not, since image1 is already on the stage, loaded up in image_loader2) but the image still takes time to show on the image_loader1 (half a second).So, I want my_btn to be functioned like this that it performs its first action which is
'image_loader1.loadMovie("imagepath");' and then 'gotoAndPlay(frame#);'..
how can i make a function example() be repeated 5 times with a delay of 3 seconds in between?
View 8 RepliesHow can I delay this function to happen 5 seconds AFTER I rolled my mouse over:
[AS]
on (rollOver) {
_root.mc_fotos.onEnterFrame = function() {
this._x -= ((this._x + 2800) / 4);
[Code].....
I want to create a function based (not frame) delay of about 10 seconds to the function at the start of a flash movie, the code only needs to run once.I'm very new to actionscript and have been given links to SetInterval and SetTimer examples but they all seem to be very complex.The function is below. I believe it's possible to add the commandTimer(delay:Number, repeatCount:int = 0) how me to a simple example.
onClipEvent (enterFrame) {
framePos = int(_xmouse / 100 * _parent._totalframes);
if (framePos < 0) {
[code].......
I'm trying to build a conditional statement that will addChild and removeChild at different Timer Delays. Before I go any further, I thought, I should mention that I'm usinig TweenMax to ease the alpha of ease Child from 1 to 0 and back during the process to imitate a fade-in/out.
I'm getting issue with only one line - inside a conditional statement.It's running "OK". The movie runs as I want it, but the remove/addChild transitions are not at the speed I want it at. I am getting an error message in the output, but other than that, the movie runs fine.
stop();
import com.greensock.*;
import com.greensock.easing.*;
import com.greensock.plugins.*;
[code]....
i want to duplicate a line 4 times, and move each line on Yaxis, with a delay of 1sec each time. I know i must use setinterval+duplicateMovieClip, but i've got pbs :-( actually, i've got my AS code on my line :
[Code]...
I've got a Vector of ViewToActionMap objects, which have following constructor:
public function ViewToActionMap(_forModule:eModule,
_forAction:eViewAction,
_toFunction:Function,
[code].....
I have some video which I have converted into .swfs I am trying to set delays to the three videos, so that the first swf plays on page load. The second loads after 30 seconds and the third after 45 seconds.
View 11 RepliesIs there actionscrip to add a delay to something.
I click on a button, i want Movieclip1 to move to the right, then i want a 3 second gap and then i want Movieclip2 to move downwards.
Is there actionscrip to add a delay to something....
e.g 1.
I click on a button, i want MovieClip1 to move to the right, then i want a 3 second gap and then i want MovieClip2 to move downwards....
I have a clip that's 1450 pixels wide, masked to 725 - basically a left side, and a right side. The left side will contain navigation for a portfolio, which when clicked, the movie plays 10 frames during which a movie clip called portholder will slide over from the right, and load the appropriate movie clip. Here's the code on one of the bits of navigation:
[Code]....
Essentially, I'm trying to replicate the effect Your Majesty is using. I'm sure there's a way of using actionscript to slide portholder back and forth, instead of using animation, but alas I'm not a scripter (as you can tell!). But what I'd REALLY like to do is to tell the container clip to wait until it's fully in position before loading whatever.swf, as opposed to having a movie already in progress moving across the screen. Basically tell portholder "Wait until your x value is 0 before loading whatever.swf" I thought about using the setInterval, as recommended to someone else on these forums, so tried:
[Code]....
i want to have a delay in my script.i got this button called "btn3", that is scripted to cycletrough some pictures when i click it. like a slideshow. but...iwabefore it shows. within these seconds a door will close, and whenit opens the next picture will be there. so you see, the picturecan not switch before the door is closed.someone told me i sholud use "setInterval method", but howand where?here is the code for the btn3, i guess the delay should comehere, or maby not...you tell me:)
btn3.onRelease = function() {
this.currentObj++;
if (this.currentObj>6) {
[code].....
I want to repeatedly add a movie to the stage using add child so have created a loop to add it 30 times. How can I make it so they aren't all added at the same time. I'd like to be able to set an interval of time between them being added.
View 3 RepliesI Have Flash CS4 and a pretty decent system with Vista and 3 GB of RAM. However, whenever I click on anything in Flash, it takes about 3 or 4 seconds for it to become active. If I click a keyframe, the stage won't come up for 3-4 seconds, if I click the text tool, the cross hairs won't come up for 3-4 seconds, etc. It has been like this since I installed it...I am just finally getting my full of it.
View 3 Replies