I load plenty of feed and want to know witch feed is comletely loaded in order to process it
var arrayDUrlLoader:Array = new Array ;
var arrayRequest : Array = new Array ("http://www.mynewsbar.fr/Elle.xml", "http://www.cosmopolitan.fr/rss/article/2002");
[Code]...
I have an external SWF with a custom event.Custom event:
Code: Select allpackage
{
import flash.display.Sprite;[code]...
Now,I would like that my loader (main.swf) listen to this event.How can i do that? I tried:
Code: Select allloader.content.addEventListener(MySprite.MYEVENT, doSomething);
But got this error:
Code: Select allTypeError: Error #1034: Type Coercion failed: cannot convert flash.events::Event@51866881 to MySprite.
[Code]....
As you see from the code above I have a loop that loads images on each pass using the same loader. This works, however, it is looping too quick (I believe) and as such the "addBook" function that handles pushing these into an array is pushing them into the array in the wrong order. Two questions: (1) Am I approaching this incorrectly? (2) If not, is there a way to listen to the loader event so the loop proceeds only after the load of that image is complete?
PHP Code:
var filePaths:Array=["thmb1.swf","thmb2.swf","thmb3.swf","thmb4.swf", "thmb5.swf", "thmb6.swf",
"thmb7.swf","thmb8.swf", "thmb9.swf", "thmb10.swf", "thmb11.swf" ];
function loadImages3(event:MouseEvent):void {
[code]....
My problem is that I can't figure out how to decouple the loader from this loadNewRow function. Ideally, I'd like to figure out how to load all the swf's give them dynamic names... like thmb1loaded, thmb2loaded, thmb3loaded.. push into an a ("loaded") array and then have that be used to build the grid.Right now, its loading them every time the loadnewrow function fires. I'm sure its a simple matter of iterating a .name within a contentloaderinfo .onComplete when each swf is loaded...
I have an Array Randomly loading images on to the stage, there is a 'splice'so no 2 images repeat. the problem is - once the images all get 'deleted' there are no more images the array can pull. I want the images to be recreated in the array.That way It will load the 29 images I have Randomly, with out repeating them and after all 29 appear it will start over again.If I remove the 'splice' I can load as many images as I want however some load twice or more before the batch is complete.
Code:
var images:Array = new Array();
for (var i:Number = 0; i < 29; i++) {
images.push("image" + i + ".jpg");[code].....
I'm new to AS3-What I need to do is load each jpeg in an array into a new Loader, then find the image's dimensions before attempting to load the next one. A Loader makes its info available through the LoaderInfo class. Loader has a property, contentLoaderInfo, that itself is an instance of LoaderInfo. When information about the Loader's requested file become available, it broadcasts Event.INIT. The AS3 language reference gives the following example for handling an Event.INIT event broadcast by a flash.display.Loader's contentLoaderInfo property, which itself is an instance of flash.display.LoaderInfo:[code]The AS3 reference says that neither Loader nor LoaderInfo accept any parameters in their constructor.
View 2 Repliesi've been having issues with my embedded image so i found this really cool script that does what I need. problem is it only loads one script and i don't know a lot about Classes and i'm not sure how to convert it so it loads multiple scripts?
[Code]....
I want to load an array with images in Main.as, by using a loader in another class. The problem is, I have to wait for the images to load before returning the array. How do I return the array images[] (once it's loaded) back to characterGFX[] in Main.as? I'm just lost.
Main.as
Code:
package {
public class Main extends Sprite{
private var gfx:Gfx = new Gfx();
[code]....
I am trying to make a Loader variable with contentLoaderInfo as a new instance and for every object in the array like this:
[Code]....
so for some reason the previews object in the display list gets bumped out with the last object in the array.
I have two swf files, each one almost with the same classes, the most important one is a Singleton class, each swf does "singleton.getInstance()". The diference is that one swf is like a container and the other one is like a module. So when the container loads the module from an absolute path like loader.load("file://c:/modules/module.swf") or loader.load("[URL]"), two different singletons (same class) are created
But when the container loads from a relative path like loader.load("module.swf") , just one singleton is created (that is what I want) I am just intrigued with this behavior, could someone explain me this? PD: I believe is something related to loaderContext and applicationDomain but It also appears that isn't working right. -Patricio Foieri , Vertigo Labs
The title describes the problem: Loader.load() is firing the INIT event, but in my listener it's reporting loader.content as null. The description for INIT event is "Dispatched by the associated LoaderInfo object when the properties and methods of the loaded SWF file are accessible."I'm loading a lot of JPG images, and 95 percent of the time it works fine; the init listener fires and reports valid loader. content.I absolutely need loader.content available because I need to set the bitmap smoothing property to true.I've tried using Event.COMPLETE and it has the exact same problematic behavior.
View 13 RepliesI'm feeling a bit low now as I have been suffering this for months. A simple loader loads my simple game and runs VERY FAST on even slow pcs BUT when I build this other loader, it goes quite slowly and I don't know where the app is going wrong. WHERE is the processing consumptoin coming from out of my app.
[Code]...
I have the following code which simply loads an external swf, puts it in the right place and should all be hunky dory.This works:
Code:
var myLoader:Loader = new Loader();
addChild(myLoader);
var url:URLRequest=new URLRequest("foobar.swf");[code].....
to set the dimensions of the loader so the external swf doesn't 'spill over', the result is a blank screen. No matter how high I set those dimensions it just doesn't display anything.
I got this very strange behavior from FlashPlayer debugger 10.1 r82. When I call loader.load method, no ADDED event is dispatched to the loader object. But if I open the file and call loader.loadBytes instead, an ADDED event is dispatched to the loader object. I suspect the ADDED event is dispatched because the content is being set as the child of Loader object, but why in the other case it is not dispatched?
View 4 Repliesthe file loads correctly but the loading screen only flashes up at the end.The only thing being exported in frame 1 is the loader image, and that is extremely small.Is it possible that there's a queue of things being loaded and the loader image is at the bottom of that queue? Since that was one of the last things added to the project
View 1 Repliesi have a main loader swf file called loader.swf and it loads an RSL.swf (runtime shared library for my swf files) and then 10 swf files, each one to a container (fE.: movieclip '01' in loader.swf, then movieclip '02' and so on). the 10 swf files have a lot of references to RSL.swf, and i have to use RSL.the problem is when loader.swf loads the RSL and the other 10 swfs the loader throws errors like this:
Code:
*** Security Sandbox Violation ***[code]...
then i put in EVERY swf files (loader,RSL and the other 10) the code Security.allowDomain ("*") but throws the same errors...
I'm loading some images with Loaders, cloning the BitmapData to a new Bitmap, and adding the Bitmap as a child of a Sprite. So far, so good. I want the Loaders I'm using to be removed by garbage collection, which they seem to be. The problem, or so it seems, is that when the Loaders are cleaned up, the Bitmaps I'm creating lose their data.
Edit: All this is happening when a class is instanced, and many copies of this class are being used as actors in a game. As the Actors are being created the older ones are losing their BitmapData to garbage cleanup. When all of them are finally loaded, only the last few are visible. I've rewritten my posted code as a class. If I prevent the Loaders from being cleaned up by somehow keeping a reference to them, the Bitmaps don't lose the data, but I don't want these Loaders hanging around.
[Code]..
I am attempting to load multiple images in AS3 and I'm exploring different options on how this can be done.I would like to have to only use one Load() instance and handle the various image assignments in the onComplete handler...here is my first attempt:
var buttonLdr:Loader = new Loader();
buttonLdr.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, onLoadError);
buttonLdr.contentLoaderInfo.addEventListener(Event.COMPLETE, onLoadCo
[code]....
Sorry for the complicated topic. I got a .swf that loads in other .swfs. Rather than figuring out how to make a loader for loading .swfs I thought I'd just use a simple loader in the .swf I'm loading.
However, it doesn't work. It starts fully loaded but doesn't finish. Heres the AS:[AS]_root.stop();
PercentLoaded = _root.getBytesLoaded()/_root.getBytesTotal()*100;
[code].....
how to create an image gallery that loads external bitmaps. It also has some nice fade in/fade out effects using Tweener. I was wondering, what would I need to modify from my code to load MovieClips from the library instead of the external JPEGs.
Code:
import caurina.transitions.Tweener;
var btn:Object;
var disabledBtn:Object;
[Code].....
How to access a loader loaded by a loader
View 4 RepliesI was searching on google for it, I couldn't find it.
I would like to know how can I listen to sockets using actionscript 3
if there is a way to listen to a variable for changes? I've seen that you can listen to a change in a component, but I've not found any examples of variables?This is what I have tried, to no avail....
Code:
var myVariable:Number = 0;
var myListener = new Object();
myListener.change = function(change) {
trace("variable changed");
[code]...
I have also tried .onChange instead of just .change but get the same results.
siteLoader.as, Line 23 1061: Call to a possibly undefined method load through a reference with static type Loader.
[Code]....
if I have a class I load, import com.pixelator;//import explosion class In my movie I want to run a function when it finishes and dispatches the event below. How do I do that? here is the code from the class
PHP Code:
function completeHandler() {
dispatchEvent(new Event("PIXELS_DONE"));
}
How do I write this? This is what I have but does not work...
vidPlayert2.addEventListener(VideoEvent.COMPLETE, isComplete);
function completePlay(e:VideoEvent):void {
//vidPlayer2.alpha=0.2;
}
I am trying to put a command in one of my movieclips (mc1) that will say: When mc2 is at frame 20 (or has done a function assigned previously), gotoandplay frame 5 (in mc1). I am going to be putting this code inside the mc1. I am trying to design my button (mc1) to dim when mc2 or mc3 is clicked (and mc2 to dim when mc1 or mc3 is clicked, etc.) I have the dim tween on frame 5, and the clicked frame on frame 20, in my example.
View 13 RepliesHow to listen Mouse Over system tray icon event?
View 5 RepliesHow do I listen/respond to a specific cue point by name in AS3?
I have this listener which runs a function as soon as a cue point is reached, but I can't figure out how to run different functions for different cue points.
center_flv.addEventListener(MetadataEvent.CUE_POINT, interactive);
I'm working on a game where multiple laptops (16-20) will be playing the same swf file in flash player.
I need to know if there is a way for the flash movie to listen to a mySQL database for a value change.
For example:
The flash movie is stopped and checks the database if a value has change from 0 to 1. Once the value changes to 1, it will play the next frame.
I need a control where all 16-20 laptops play the next frame at the same time. One admin will dictate this action.