While playing around with as' vector.sort() I found out that it behaves normally in every case except where it needs to sort a vector with only 2 or 3 distinctive values. If this is the case, the sort() function runs extremely slowly.Here's my code:
var test:Vector.<int>=new Vector.<int> ;
for (var i:int=0; i<6000; i++) {[code]....
some of you have been trying the prerelease of Air for Android like myself. Its all great and easy peasy to export the apps to my phone but it seems to be ridiculously slow even for seemingly simple scripts.
This is what i'm trying to run at the moment and the app times out before it gets running (All the apps do get running eventually but only after the time out timer could have run over multiple times).
import flash.display.Shape;
import flash.events.Event;
import flash.sensors.Accelerometer;
import flash.events.AccelerometerEvent;
[Code]...
From what I can see theres nothing actually wrong with the code from what I can see but it just takes so frickin' long to load. If I make an app with some equally simple animations it loads almost instantly. I am aware that this is only a prerelease version of the software and the documentation does say that hardware acceleration has not been added yet but whenever I watch the videos up on youtube of the Adobe team making amazing apps with obviously buckets of script running smoothly on their phone I get annoyed
P.S The processor on my phone isn't the problem either (Nexus One Eclair )
For some reason whenever I try to access a any of the files within a project that I'm working on it goes extremely slow. I'll click something, or type something and it'll take like 30 seconds before I actually see it do anything. I never had this problem with this project before, seems like it came out of no where. If I just make a new document, or goto another project it's fine.
View 7 RepliesI am fixing up a php script to receive a byte64 encoded image and store it to database
Here is my problem the script takes very long time, sometimes up to 5 minutes, to respond when flash calls the script(via a post request)
(i test it with a very small image)
if i remove the byte64 encoded data from the request it loads fast, and if i call the script from the browser with no data it is fast
i tried removing all php script from the script file so no php is run, and with data it is still slow.
I am using the following code to tween an movieclip once _global.choiceMade equals 1...
onClipEvent (load) {
import mx.transitions.Tween;
import mx.transitions.easing.*;
}
[code]....
The script at the top is on a movieclip these buttons are contained in called buttonHolder which does what it says, and tweens the buttons across the screen to reveal a next button once an answer is chosen.
So I'm using AlivePDF to generate a 6 page PDF with a range of text and graphics. It's a fairly large PDF, prob 4mb when saved. I need to be able to pass the PDF along with a few other variables to a PHP script that uploads the PDF and then sends an email.
Because I need to pass the PDF data along with other information, I've been using a standard POST request with URLVariables, only I Base64 encode the PDF ByteArray before sending to avoid any sort of corrupt data. This works fine, except the Base64 encode operation takes ~8 seconds, and sometimes longer on a slower machine, causing a timeout.
It's extremely slow to render any flash motion in CS4. I import to the stage some material and when I try to change and create any motion the processor usage raise up to 50% and the program freezing. It will be completly useless... Is there any solution to this problem?
View 2 RepliesDoes anyone know to sort in descending order in a Vector? the sort(Array.DESCENDING) seems not support it.
View 1 RepliesI have a vector of fixed length 9 with some objects. each object has a variable value:Point and the vector shall be sorted such that objects with a higher value.x appear first - and if theyr value.x is the same, then the one with the smaller value.y shall be first. this is my compare function:
[Code]...
Flash CS4published with AS2.0Flash Player 10The movie is 15FPS, and lasts about 16 seconds total.With about 40 Vector images that are constantly, coming into the screen and leaving the screen - and when they're doing that they're also fading in and fading out, and resizing. so a lot is happening on the screen... then after the 15 images or so are done swirling around, they all come in for the grand finale and this is really where it bogs down... All of them, as I said are vector images published as .swfs from Illustrator (if I tried .ai files or anything else it was tons worse). The movie just completely bogs down, and goes very very slowly - I'm assuming this has to do with the computer trying to draw all the vector images as they are resizing, fading, and moving - etc.
The reason my client wants vector images is because of the clarity - Is there anyway to retain the clarity of these resizing images, but reducing the load on the client side so it doesn't slow down??Also - while I'm here - I should probably look elsewhere, but anyone know of a quick way to expand my movie say from 16 seconds to 24 seconds? Keeping all the same animations but just slowing it down slightly so it's not so fast without redoing everything
I need help with page "Thumbs" (as first frame), page "List" (as second frame) and Image gallery (as third and base). So, every frame have one own XML file...When you choose some thumb or list line, you must came to this image in the gallery. Easy, sure.. but i don't know what Function exactly i need to use.It's one flash move, hence it doesn't work with getURL or loadMovie...Some exemple with 3 separate pages here: yuri.fr
View 1 RepliesI have an array that is structured like so.
[Code]....
Normally, I'd just like to sort the array alphabetically using the name field, which is easy enough using the following code. However, I'd like to create a radio button called 'loadedRadioButton' and when it's click on, I'd like to sort the array on the loaded value first(any items with loaded=true should be at the top, sorted alphabetically), then afterwards, any other items with loaded=false, sorted alphabetically should follow afterwards, how can I do it?
Here is a website that needs a sort function to sort the video by Last name. [URL] I would like to have a link that popped up videos sorted by last name. Please take a look at the following site for an example. [URL] When you click on seconds in the menu below, it opens a pop-up window that sort the videos in a certain way. If you are willing to,I will give you the source file of what it currently has on [URL]
View 1 RepliesI'm getting
ActionScript Code:
1067: Implicit coercion of a value of type
__AS3__.vec:Vector.ie.aro.floorplanviewer.model.buildingVOs:ConfigurationVO>[code]....
which surprises me as ConfigurationVO inherits from NodeVO.Is the compiler really not able to figure out that a Vector of a superclass should be able to hold a reference to a Vector of a subclass?
I need to import a bunch of vector work from Photoshop into Flash. Is there a trick to it. So far, on import, it's converting the layer styles into black.
View 5 RepliesIf I want to pass in a vector to a function, a vector of any object specifed would it be someVetor:Vetor.<T>? beause FB 4.5 sais T is undefined.
View 10 RepliesCreated Vector with the initial length of 100.
var v:Vector. = new Vector.(100);
v[90] = "Ninety"
v[190] ="oneninety" //RangeError: Error #1125: The index 110 is out of range 100.
//How to change the length from 100 to 200 to store a value at index 190
I'm using Flash CS4 with AS3. I want a timer to call a function at 50 ms intervals for 100 times. however the timer takes much longer than it should, which adds up to 1677 ms (1.677 seconds!) too much after 100 repeats. Am I missing something here or is the timer THAT inaccurate?
[Code]...
When I get a collection back from the service tier, I create an ArrayCollection and apply a sort. When I add an item to the collection later on, the sort is still in place? It seems to be the case. I thought I was only sorting it once, not applying a sort that will stick??Here is the method for adding an item:
private function onAddNewClick():void
{
var fileTemplate:FileTemplateDetailDTO = new FileTemplateDetailDTO();
[code].....
On my simple website, everytime i navigate to another page, the movie clip plays extremely fast and is out of sync with the sound.
View 1 Repliesmethod where you play a blank file, with a specific time length, and that will loop, and using that sound file, it will dispatch a event when it finishes, hence you get a very accurate loop.
View 4 RepliesI have a VERY odd problem, here it is: Description: I have a USA map, some states are clickable and have a rollover effect made via MCs. When you rollover a state, it changes color, and when you roll out it goes back to normal. If you click on a state a 'drop-down' layer rolls down with some text in it. You can close this layer by clicking again on the state or by clicking on a button of an 'X' at the top right of the layer.
My problem: When the map is first loaded, ALL the states' rollovers work properly, but once you click on a state the drop-down layers comes out fine but the rollover of that state and of **ALL the other states just stop working. In other words, when you put your mouse over any state after clicking on any of the other states, the rollover effect doesn't work anymore. Methods: The text inside the drop-down layer is being called from a text file with this code:
[Code]...
I am currently being confused by the Vector class.I wrote a beautiful XML to TypedClass parser. Works beautifully and without fault. UNTIL a co-worker noticed we got a Conversion Error for Vector.<Number> to Vector.<*>.
Every Vector I've ever tested all extend Vector.<*>.
Vector.<Sprite>, Vector.<String>, Vector.<Point>, Vector.<Boolean>, Vector.<TextField>, Vector.<CustomObject>, etc etc etc. ALL of them.
<type name="__AS3__.vec::Vector.<String>" base="__AS3__.vec::Vector.<*>" isDynamic="true" isFinal="false" isStatic="false">
<extendsClass type="__AS3__.vec::Vector.<*>"/>
[code]...
But then when I use describeType on Vector.<Number>, Vector.<uint> and Vector.<int>.
<type name="__AS3__.vec::Vector.<Number>" base="Object" isDynamic="true" isFinal="true" isStatic="false">
<extendsClass type="Object"/>
<constructor>
[code]....
Now I have accounted for these 3 vectors individually as even uint and int does not extend Vector.<Number> as I would have expected.
And my parsing function works for all types correctly again. But my confusion comes as to WHY this is the case, and why I couldn't find any documentation on the subject.
I'm using Flash CS5 and am currently working on an animation/advertisement as part of my final exam in Applied Art. This is a relatively large file consisting of internally animated Graphics and Movie Clips. When playing it in the .SWF player it seems to play fine with no extreme lag accept for a single second at the beginning but when exported to a .mov file it plays extremely slowly causing the frame rate to decrease considerably.I need to upload this onto my youtube channel when it is done as the link needs to be sent to the examiner. All this may have something to do with the fact the .mov file, although unfinished, already weighs 75.6MB at 30 seconds of work.
View 3 RepliesI want to create an extremely simple chat where any client can log into this webpage, two windows, one to enter text and the other to see messages. Very irc-like. How do I resolve the communication? In Director there was the multiuser server that let you talk among swfs, is there something similar in Flash MX? Or should I resort to php/mysql as the only way to go?
View 1 RepliesI am using an SWC library so that I could use the fl.controls.TextArea in my project in FlashDevelop. While working on an unrelated section of my code I noticed that all my TextArea objects had turned extremely blurry (both the text and the UI elements). I'm not sure when this started, but when I first added and setup the TextArea I spent a lot of time tweaking and configuring it and didn't have any issues with the sharpness of the object.
View 1 RepliesI have a photo gallery I developed using AS2 in Flash 8 Pro. You can find it at [URL] I used a loadMovie to import different swf files into the main swf file when a button is clicked. It works great in Firefox and Safari but suddenly stopped working yesterday in IE. It worked in IE (6, 7 and 8) since last Friday when I uploaded it but stopped yesterday. I am using IE on Windows XP. I did try IE on Vista yesterday when I started having trouble with my XP IE and it seemed to work...however, this morning I can't even get my IE Vista to come up so am not sure it is still working on that version.I removed the preloaders that are in the imported swf files but it didn't help so I put them back in. I am using the following code in my html to embed the flash:
Code:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,24"
width="815" height="570">
[code]....
I thought maybe there was a change in the way my server was serving the flash so I uploaded onto another server...still not working in IE. I also checked to see that the server did not store my swf files in all lowercase names.
Im really confused...Why is CS5 Suddenly not parcing my AS3 when I compile it into an swf? I'm using flash player 10. The only thing I did to CS5 was add the molehill api and I installed it just fine.
View 3 RepliesI have a photo gallery I developed using AS2 in Flash 8 Pro. You can find it at [URL]. I used a loadMovie to import different swf files into the main swf file when a button is clicked. It works great in Firefox and Safari but suddenly stopped working yesterday in IE. It worked in IE (6, 7 and 8) since last Friday when I uploaded it but stopped yesterday. I am using IE on Windows XP. I did try IE on Vista yesterday when I started having trouble with my XP IE and it seemed to work...however, this morning I can't even get my IE Vista to come up so am not sure it is still working on that version. I removed the preloaders that are in the imported swf files but it didn't help so I put them back in. I am using the following code in my html to embed the flash:
[Code]....
If I put several tweens in a loop - rewind and start them again - they suddenly stop(!!) after a while (about 10 sec). [URL] But when I put the code in an extended Sprite Class with the DisplayObject everything works as expected. [URL] Ok, "problem solved", but why is this? I don't understand. Is it a bug, or am I doing it wrong? It works in AS2 (Test 3). [URL]
View 12 Replies