IDE :: Video Fps Versus Project Pfs?
Feb 4, 2010
A Video-loop at 25fps imported to flash, embedded, plays fine if the project fps also is 25fps.But i also want to add a 3D Carousel menu, but at the projects 25 fps it goes a little bit choppy when rotating quick.So I try to change the projects fps to 50, and voila, the menu looks good but the video plays to fast.The video should alternate between clips randomly, and the clips has to be preloaded, thus its embedded in the swf (...or could this be done with flvs?)5-10 clips.
View 2 Replies
Similar Posts:
Jun 30, 2011
So I have streaming video coming in, and I want to know when it is buffering. This is fundamentally not that hard, just adding an EventListener for some type of buffering event, but I was wondering if this is necessarily the "best" way to do it.
My other thought was setting up a timer that polls the video feed every X milliseconds asking it if the video isBuffering(), or somesuch. While I could, in the worst case, wait the full X milliseconds before querying the video stream, I've decided that this doesn't actually matter to me; I can work around it, and indeed do so quite naturally already.
So I'm asking: is there substantial overhead involved in having an EventListener (assuming I already have quite a few), or is the advantage of catching the buffering event right away sufficiently appealing?
View 1 Replies
Jul 8, 2009
Does anyone know if Flash Media Server can be configured to reduce the image quality of a publish stream if available bandwidth goes down or there are delays in the connection?
When I (locally) play back videos recorded on poorer/intermittent connections, video frames are dropped, so the image freezes up.
View 6 Replies
Dec 16, 2009
I have a preloader and 10 swf that needs to be cache. My problem was that when the preloader started, it was not only caching the swf, but a lot of .flv and a lot of the same player skin (flvplayback component). I don't need and don't want to preload or cache those .flv. They need to be load only when someone is on the page not before (in real time, not preload).
But the problem is that the videos (flv) are on the first frame of every swf cause I need the video to start when they enter the page. So when the preloader start, it starts to preload the videos too (since they are on the first frame).Is there a solution to change the behavior of the preloader or restrict what he can load ?Is there a better way to make my video start on enter frame without putting it on the first frame ? Something that would not be preload and cache but that would start when the user enter the page ?
View 1 Replies
Aug 13, 2010
we are doing a seamless interactive video-game-video project, but are having optimization problems. Because the client wants a full-screen option for both the video and game segments, our file size is too big. Any advice on how to minimize load time yet retain a relatively high-quality image standard? The h.264 codec would help with image quality, but there are licensing issues, and we need the transperent alpha channel for the video segments.
View 1 Replies
Apr 20, 2010
I am trying to embed a video file into my flash project and I want to to play till the end and jump to a different frame in the timeline. I tried to emport the video into flash and it says that the file is not supported. Can I not do it or do I need to convert the mpeg file into some sort of fla file?
View 1 Replies
Jan 14, 2011
I have a video that I've embedded into a project by means of linking it from my server, where it lives (not embedding it into the actual project) and I cant for the life of me find a way to get the video to continually loop when it finishes. Any looping meathod I've found so far using AS3 only loops the basic animations in the movie, not the video.
View 1 Replies
Sep 23, 2009
I have imported a flv to as "import video" and placed it on the stage. I have added other layers each on frame one. I want to drop stills out as others enter but I cannot run the video on the timeline to determine at what frame I want something to change. I could of course time it out at 15 fps but is there not a friendlier way to pick a point where one object exits and another enters? The video is a flvplayback instance. I have not made it a movieclip or named it.
View 4 Replies
Jun 21, 2010
I cant "center" my project, like you can see its "fixed" (yellow lines) in the left side and I cant see "invisible" part of project... (area around the project). how can I move my project so I can see the not-project area around the project. (picture 2).
At the moment situation... (cant see that area around the project)
http://img19.imageshack.us/img19/1186/68553623.png
View 2 Replies
Mar 28, 2012
I am having trouble getting a function to work within flash. I basically am creating a video where the intro video plays through then the user is prompted with 3 choices to select which video will play next. I am using keyboard input to make the selection. I have the keyboard input capturing working, pretty basic, but I am having trouble getting it to switch to say scene 2 (where I have another video).
Code:
import flash.events.MouseEvent;
import flash.events.Event;
import flash.events.KeyboardEvent;
function reportKeyDown(event:KeyboardEvent):void {
[Code] .....
And I get a compiler error stating "Scene 1, Layer 'content', Frame 1, Line 11 1120: Access of undefined property event.
I've created a new layer in the scene 1 and put that code in and everything compiles fine. I created scene 2 and imported a video into it from the library but the video plays and does not respond to any key input and the output is not showing the trace any longer. Enter does work to pause and play the video though.
import flash.events.Event;
import flash.events.KeyboardEvent;
function reportKeyDown(event:KeyboardEvent):void {
stage.addEventListener(KeyboardEvent.KEY_DOWN, reportKeyDown);
if (event.keyCode == Keyboard.ENTER){
gotoAndPlay("Scene 2");
}}
View 0 Replies
Jun 17, 2009
I'm working on adding a small preview video player to a flash project I'm creating. I've successfully created an actionscript 3-based video player before, so my code is pretty much adapted from that. However, though the code executes successfully (seemingly), I can't see the video anywhere.
Code:
private function buildVidPreview(page:Array):void {
vidPreviewa.x=stage.mouseX;
Tweener.removeTweens(vidPreviewa);
Tweener.addTween(vidPreviewa, {alpha:1, time:1});
setupPreviewVid(page);
[Code] .....
View 10 Replies
Jan 19, 2012
I trying to play a flv file in a flex mobile (flex 4.6) The files will all be locally stored and on the device. Would it be better to use the video even if it is not supported or can i use a movieClip? I am going to try and fade out a picture and then play the video with out any user controls and then fade back to the picture. The this will all be on a tablet. I am using Flash Builder 4.6.
View 1 Replies
Jul 4, 2009
I would like to add a widget board to my flash project so users can embed my project in their web page or wiget display. To see what I'm talking bout go here [URL] and click the white + mark on their widgets.If your a moderater please put this in the correct area, and consider making it a sticky so we can post new ways to impliment in different sites as they become available.
View 2 Replies
Jun 15, 2009
I am working on this one project that has a couple of movieclips (already placed on stage) which have a custom class set to export via the Library. Each of those custom classes loads an external SWF using URLRequest().
Is it possible (or, what is the best way) to preload the whole project first, including the external SWFs?
View 7 Replies
Oct 7, 2010
I am testing RTMFP unicast for a video chat project using FM Developer Server 4.0.During the testing I overloaded the upload traffic to make packets dropped rather than suffering delay due to retransmission.
However, I see it makes a significant delay and it looks like doing retransmission just like RTMP.
Do you know if there is an option in FMS to disable the retransmission or other configuration I have to consider?One thing I found is "Netstream.videoReliable=false; Netstream.audioReliable=false;" but it doesn't make any difference.
View 2 Replies
Dec 10, 2010
I just wanted to ask if I have a project created in authorware and one more in director.I just wanted to ask can we convert authorware project in flash directly or indirectly?Or can we import authorware project and/or director project in flash.does anybody know or anybody has done this b4???
View 1 Replies
Jun 15, 2010
Maven 2.2.1 unzipped,M2_HOME set and repository altered to point to different drive location in settings.xml Flex 4.0:
Installed Created a multi-modular webapp project using flexmojo:
mvn archetype:generate
-DarchetypeRepository=http://repository.sonatype.org/content/groups/flexgroup
-DarchetypeGroupId=org.sonatype.flexmojos
-DarchetypeArtifactId=flexmojos-archetypes-modular-webapp
-DarchetypeVersion=RELEASE
with following options
groupId=com.test
artifactId=test
version=1.0-snapshot
[code]....
Parent pom has swc, swf, war as modules.
Dependency is war->swf->swc.
With parent artifactId of swf, swc, war set to swf, swc, test respectively.On executing mvn on test folder(for that matter clean or anything) I get this following error.
G:Projects est>mvn -e
+ Error stacktraces are turned on.
[INFO] Scanning for projects...
Downloading: http://repo1.maven.org/maven2/com/test/swc/1.0-snapshot/swc-1.0-snapshot.pom
[code]....
Looks like its trying to download the project from maven's central repository instead of building it.
View 2 Replies
Jan 28, 2010
I am developing a project in Flash Builder which will load a file built by Flash CS4. The code in Flash CS4 is below, it's a doc class. I am sure the dispatchEvent has been invoked[code]...
View 1 Replies
Oct 20, 2009
I've recently started making a game in FlexBuilder. The game is currently a Flex project. Is there any downside to using Flex as opposed to just Actionscript? A friend of a friend told me that Flex is slower than an Actionscript project. I've been unable to validate this on the internet; is there any truth to that claim?
View 6 Replies
Mar 27, 2011
If I create a new flex project with flashbuilder, these are the libraries that get included by default through the Flex SDK[code]...
View 1 Replies
Jun 18, 2011
I have a CodeIgniter project and I made a back-office in Flex. I was wondering how I can implement the Flex project in my CodeIgniter since I'm working with routing I can't route to any directory. So there isn't a way to display the back-office.
View 1 Replies
Apr 30, 2011
I have one Eclipse Workspace containing two projects. - The first is my actual library. - The second is example code for using the library.When I push this code to GitHub, I don't want two separate projects, I want the example code to go into an "example" folder of the second library.How and where would I do this? From Eclipse, GIT, or GitHub?Or is there a better way of including sample code in GitHub projects? (the example code doesn't actually need any version control)
View 1 Replies
Jul 14, 2011
-FPS between FLV and Flash file.If I load an external FLV file (24fps) into Flash file(30fps), then the FLV file will be played by 24fps or 30fps?
View 6 Replies
Feb 5, 2006
I'm working on a Mac. Now I made a site and when I compare colors on pc I get a huge difference:s. My green grey looks like it's black. How do you manage to get the colors wright on both platforms? The calibration of my screen is perfect for print.
View 1 Replies
Oct 27, 2011
I'm working on a new portfolio, full flash website for myself and so far I've been working on my Macbook Pro almost entirely. The website is somewhat heavy in graphics/animation however nothing too big, all pages are around 500kb or less. Running the website on my MAC in any browser it looks perfect, the animation runs smooth, everything goes great. However, when I try to run the same website on my PC which is pretty good, the whole website feels a little bit choppy and laggy and I'm not sure why. It feels like it chokes for 1/4th of a second every like 2-3 seconds, lower FPS basically.
View 11 Replies
Jun 22, 2009
I have an application that I support but did not create. I need to test it on FMSS 3.0 but the developer version has both Streaming and Interactive Server enabled. Is there any way to disable the Interactive Server in the Developer Edition so I can confirm the application works on Streaming Server without influence from Interactive Server? The application works on the development server but when I move it to the production Streaming Server, it does not respond the same.
View 10 Replies
Jun 9, 2010
I am planning to start a new project in as3 and I want Dependency Injection in the project. I found that parsley and Robotlegs are two popular frameworks for implementing DI in AS3. Which is the best one among these two?
My main requirements are
lightweight
minimal learning
extensive documentation and active helping community
View 4 Replies
May 5, 2011
In Flex world, is DTO / VO same as Presentation Model?
View 2 Replies
Aug 14, 2007
when i'm coding directly on the timeline, i usually create a var like this:
Code:
var home:MovieClip = this;
so i always have something to reference the main timeline's scope. how could i do this in a class? delegate.create gets a little confusing.
i tried a few things like the following:
Code:
class com.myClass
{
public var className:String = "myClass";
public static var version:String = "0.0.1";
[code]...
of course this is redundant because it'll scope just fine as parseNews();, but i'm just wondering why it's letting me scope it like this here and not in the onLoad declaration?
View 6 Replies
Mar 15, 2009
I'm animating various squares that needs to move "smoothly" on the screen.I've tried with the basic Tween and with TweenLite at 30 and 60 fps and the animation still choppy while at 90 fps looks better.
View 4 Replies
