this.stage.loaderInfo.bytesTotal; with that line of codedoes stage mean the loading of the entire swf is monitored or the loading of objects which are used on the stage are monitored? can specific objects (say a specific movie clip) be targeted?can externally used AS scrips be targeted? and what does "this" doe
View 8 RepliesI am confuse about this two method bytes Loaded and bytes Total. I want to see pratical example with trace method. Is there body know how to use this two method .
View 1 Repliesi built an preloader class that load any content using Loaders objects created dinamically with a "for" loop and save each Loader inside an array. In this way, i have one LoaderInfo object by each Loader object created. I created a variable whose hold the sum of all bytesLoaded properties values for each Loader object, in other worlds, this variable holds the total of bytes which will be loaded.Here's the code:
ActionScript Code:
var loadURLs:Array = new Array("url01","url02","url03",...);
var loaders:Array = new Array();[code].........
I have a flex 3 app that uses netstream and a video object to stream .mp4 movies. I want to use the bytesLoaded and bytesTotal properties of the netstream to display the buffering information. I would also like to get any information about the number of frames that are dropped if possible.
When I've tested on .flv I'm able to get the information without a problem, but it doesn't seem to work on .mp4.
Is it possible to get this information streaming .mp4? Is there some configuration that I'm missing to make things work the same for .mp4 as .flv?
I have created a custom progress event in a purpose to pass a handy parameter to event handler:
[Code]....
You see - I am unable to get progress status from my CustomProgressEvent !
I want to stop ProgressEvent.Progress and two seconds to determine whether the Internet connection is dialup. Is there a way to stop ProgressEvent.Progress when bytesLoaded < bytesTotal? Right now, the event continues until the entire *.jpg file is loaded and/or creates a fatal error closing Flash. Here's the code I'm using:
[Code]...
so i've been working on a flash game for a few years now and i remember seeing a setting on a tutorial a while back where you can control how much a movie loads on each frame instance. For example the first frame of my game (loader) first shows up on 12%. I want the first frame to load on 1% and then preform the rest of the loading sequence with the first frame still visible. At the moment it isn't too bad, but once my swf file exceeds a few MB then this will cause me some issues.
View 4 RepliesI want to use VideoDisplay components just to show the first frame of the videos, as a preview. So, what I do is
video.autoPlay = false;
video.autoDisplayFirstFrame = true;
But the problem is that they start downloading the entire videos. I've read some topics and docs and I feel that there is a way to avoid it For example, I've tried this line: video.mx_internal::videoPlayer.bufferTime = 1;
Ive been looking into whether or not, it is possible to load the entirety of site content dynamically from a text file. I know, how to specifically choose and reference from one txt file to a dynamic text block. But, is there a way to have one huge file? That is to say, can I target certain things within a txt file?
View 2 RepliesI am trying to load an external .swf (actually it is only an image that I published as a swf file, not a complicated movie) but I get errors. I am trying to load the .swf into a movieclip and the movieclip appears on the stage. I have put the code in frame 1 where the image should appear (in the movieclip). The code that I used is below and works fine with a .jpg and when I load it directly on the stage, that is to say, when I put the code in a frame on the stage. Why does it not 'work' right now?
I have added 'parent' in 'parent.event.target.content.y = 200;' in the first frame of the movieclip timeline, to make sure that it will appear on the (main)stage. The error that i get is this one:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at galerie2010_fla::mcBallon1_11/frame1()
This is the code in frame 1 in mcBallon1:
var imageRequest1a:URLRequest = new URLRequest("images/SWFoverig/ballon1_702x368.swf");
var imageLoader1a:Loader = new Loader();
imageLoader1a.load(imageRequest1a);
addChild(imageLoader1a);
imageLoader1a.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete1a);
function onComplete1a(event:Event):void{
parent.event.target.content.y = 200;
parent.event.target.content.x = 205;}
I would like to create something similar to this: and only need a few things to complete it.What is missing is to make the whole flash movie (the white area, including the watches and cursor) move from left to right and right to left depending on the movement of the cursor (round circle) .. Panning effect I have attached the file i am working on..maybe that makes it easier to understand
View 5 RepliesCan a finished flash file be resized.
Stage is at 1684 x 1322 animated map operated by buttons in a static key located outside of map border, all on stage. Map also pans/zooms.
Two scenarios:-
1) resize stage and all contents down to a different size.
2) resize the animated map down but more so than the static key (sits outside the map) which should remain readable.
I want to create a flash movie which firstly loads a selection of images/objects into a portion of the frame. After this is complete, the user can then drag these objects onto another area and the object will be created where the user has chosen. The user can then drag another instance of the ojects onto the area.
For example, there is a background of a lake in one area. A selection of boat pngs are loaded in an area below the lake. The user can drag these boats and place them on the lake. They can drag a boat multiple times if they wish.
I've been working on building a flash website for my company and was finally getting somewhere when I encountered a problem I cannot solve. I have it setup so that when you click on an item on the first scene it plays the second scene which is where the customization of the item is to take place. The second scene is where I am encountering the problem. I have seven buttons on the left side of the stage that are on their own separate layer. Everything was working fine until I saved and quit. Now when I bring up the second scene the buttons are all grouped together and uneditable. Also the buttons are extremely small and when I compile the swf file and view the movie all I see is the label of the buttons not the actual buttons themselves. I have tried deleting the button layer completely and redo the layer but every time I add the button component it add the same tiny uneditable button. I am including the errors that I am getting in output when viewing the swf.
TypeError: Error #2007: Parameter child must be non-null. at flash.display::DisplayObjectContainer/addChildAt() at fl.controls::BaseButton/drawBackground() at fl.controls::LabelButton/draw() at
[code].....
I have an invisible movie clip I want to go to the NEXT page, as it goes to that page, I want it to essentially remove itself (page1.swf). e.g. page1.swf (contains fancy.swf - [AS2], 4 images, several invisible MCs with code) has an invisible MC + on click = remove page1.swf.
To be clear, this does work. It goes to page2.swf and page2.swf goes to page1.swf as it should. The issue is that if the user repeatedly does this (just 2 or 3 times) the fancy.swf becomes impossible to control and Flash (CS5) crashes. I think this is due to the fact it's not unloading the entire thing, it's only unloading fancy.swf on click (I hope). So underneath page2.swf is page1.swf, and when the user clicks back to page1.swf, page2.swf AND page1.swf are underneath that, and so on and so forth.
[Code]...
I am doing a website with external swf using AS2 . The parent frame (container) is resizeable, the external swf is an animation. Some items draw outside external container. The external (swf with animation) will resize when parent frame (container) resized in scale.
The problem occurs when the parent frame resized, the flash programme define the width of external swf, such as the movieclips/jpeg outside the scene. (for example: both my Container and External swf are 1024x640. However, some of the graphics in the External Animation swf move outside this area. BUT the parent CONTAINER still RECOGNIZE and LOAD the content outside the defined stage.)
i found this izzue in FLEX, [URL]
Therefore, I would like to know if I could fix this in Flash CS3 (AS2) ?
I'm using a java-backend with a flex frontend. And when i want to use a labelfunction it doesn't load the indepth properties such as a value object, it's like it is lazy loaded in the flex side, I'm sure it is not comming from the backend because i've checked it overthere.I've got it also in datagrid's that it doesn't load all the values at once. [code]I ask at my back end get all John's, the backend gives me all John's which contains the Doe's. Now At the flex side I fire the result event from the callresponder when i receive that data. But still it can't acces the doe's into the Johns, the doe property of john is still null. When i ask it the second time it nows about the doe's, so it looks like lazy loading in a front-end way..
View 2 RepliesI am doing a website with external swf using AS2. The parent frame (container) is resizeable, the external swf is an animation. Some items draw outside external container. The external (swf with animation) will resize when parent frame (container) resized in scale.
The problem occurs when the parent frame resized, the flash programme define the width of external swf, such as the movieclips/jpeg outside the scene. (for example: both my Container and External swf are 1024x640. However, some of the graphics in the External Animation swf move outside this area. BUT the parent CONTAINER still RECOGNIZE and LOAD the content outside the defined stage.) i found this izzue in FLEX, [URL]
I've finished a game and now I'm in the process of installing the mochiads preloader. The problem is that all of my exported assets load before the preloader.So I searched around learned that there are a few things that I must do:-Turn off "export on first frame"-Set classes to export on frame 3-Put all of my exported assets in a movieclip on frame 2Now this does shift everything to load on frame 2, except the problem is that all of these assets are now absent from my game for some reason. I get no errors or anything
View 1 RepliesI'm coding a website in pure AS3 using FlashDevelop and have an object that loads an XML file on init. Is there a good way to make my main function wait until it has finished loading? I know about onComplete events and how to use them internally in the object but I'm not sure how to proceed.
View 1 RepliesI am trying to create a new "BitmapData" object via a variable name. The following code is an example of what I am trying to do, but of course it doesn't work.
Code:
import flash.display.*;
this.createEmptyMovieClip("bmp1", this.getNextHighestDepth());
var BitmapNAME = "bmpData1"
var BitmapNAME:BitmapData = new BitmapData(200, 200, false, 0xaa3344);
bmp1.attachBitmap(bmpData1, 2, "auto", true);
I have a project, that uses a set of buttons, between a predetermined set of frames, with the code for each, on the same frame. When it reaches the first frame with framescript, it lists one of the objects on stage as null. It seems like it is trying to run theframescript, before the frame finishes loading/changing. Is there a event to listen for when the frame is fully loaded?Also, I've noticed this does not happen, when the framescript starts on the first frame of the main timeline.
View 2 RepliesI'm trying to load some WDDX data into a shared object, but I'm having some troubles getting it back out. I can open the sol file in a text editor and see that my data is in there, but I can't manage to access it... does putting information into a sharedObject change things? Can you load an array into a sharedObject and have it retain it's array-ed-ness?
View 7 RepliesI am using Flash CS4 and need to resize my Flash stage and all objects therein.
To do that I activated onion skin tool, selected all objects and all frames and resized by using the transform tool.
However, masks and some motion paths are not scaled proportionally.Is it yet another bug in CS4? Here is a video illustrating the [URL]...
I increased the size of my stage to 1280 x 1024 and now objects on the periphery have disappeared. When I zoom in they appear, but when I zoom out or export the movie the objects in the center are there but the objects around the edge do not appear. If I add an object and drag it to the edge I can watch it disappear as I am dragging it, but when I zoom in it is there. I have no masks and I need to create the video at the higher resolution, so I cannot resize the stage smaller.
View 3 RepliesI am loading objects in a paper-vision gallery through xml. I have a footer with some links in them, but the problem is the XML stuff is being loaded on top, how do I get the links and such to be on top so they are not underneath?
View 4 RepliesI know the basics of shared objects but I never really got into it I was wondering if there is a way that I could save and load movieclips that I attach to the stage(Each has its own name such as clip_1,clip_2,etc) including the location(_x,_y,rot) and have it duplicate them all over again and move them to the same location as before (I'm using Actionscript 2, by the way)
View 1 RepliesI know the basics of shared objects but I never really got into it I was wondering if there is a way that I could save and load movieclips that I attach to the stage(Each has its own name such as clip_1,clip_2,etc) including the location(_x,_y,rot) and have it duplicate them all over again and move them to the same location as before
View 1 RepliesThis is the accompanying thread for the tutorial "Loading a different image each time using Local Shared Objects".Here you can post comments, questions and suggestions related to the tutorial.If it's not completely related to the tutorial, please start a new thread.You may subscribe to this thread (in the "Thread Tools" dropdown menu) in order to receive a notification when the tutorial goes live.
View 1 RepliesI have a parent SWF (Parent) that handles user navigation between multiple children SWFs (Child_1, Child_2, Child_3). How do I add event listeners to the navigation buttons on the children SWFs so that the user can move laterally between Child_1, Child_2 and Child_3? I can think of two options but can't get either one to work:
1) The parent SWF sets up the event listeners when it loads a child. So, I use a loader on Parent to load Child_1 and in Parent add eventlisteners to Child_1.myNavigationform.myButton.
The problem here is that the Parent is only handing the loader instance and I can't think of how it would drill down to the individual objects within Child_1.
2) Child_1 adds the event listeners to its own objects. This just reverses the problem. Child_1 has no problem accessing its own buttons but when a user clicks them it has no way of accessing methods on parent so that Child_2 can be loaded.