I am wanting to allow icons/small images dragged and drop on the background photo. Is this possible? If so, can you point me in the direction to look?
I want to create my own little icons/images and allow someone on the web to drag and drop an image I created, than dropped on the background image.
When I drop an image onto my canvas I can get the nativePath to the image but not the bitmapdata wich is the one I need.
In debug mode when I look into the file properties the data is set to NULL.
In my code file.data doesn't give me anything.
protected function creationCompleteHandler(event:FlexEvent):void
{
this.addEventListener(NativeDragEvent.NATIVE_DRAG_ENTER,onDragIn);
[Code]....
I am working on this image scroller, where thumbnails of images are displayed. I get each image by
function urlLoaded(event:Event):void {
urlLoader.removeEventListener(Event.COMPLETE,urlLoaded);
xml=XML(event.target.data);
[Code]....
So is there anyway I could use any of the above code to load the big image associated with the small image? If event.target points to the current thumbnail being picked up, could i do something like event.target.url to point to its name or something?
this is the code for 3d rotation [code]i want to rotate the image after dropping them in the canvas.i am able to rotate them in the panel.
View 1 RepliesI have an image loaded from an url and added to canvas as child. Then I am drag and dropping another image on it which also uses the senocular transform so the image can be transformed on the canvas. I have coded in such way that the transform handles shows up only after it's dropped on canvas. The image shows up correctly. But I am trying to save the result image (that is the main image and the dropped image on top of it), I only end up with the main image that was loaded earlier. The dropped image doesn't show up.
Below is the code for handleDrop() that is fired on dragDrop event and prepares the final image.
[Code].....
I have this slideshow type of thing I'm putting together with next and back buttons. Everything works fine until I add audio to the timeline and then all my nav buttons flake out. I don't want to load these files externally or from the library because they are voiceover narration with all my animation synced up with what is being said.
View 4 RepliesI've got a 800x600 document that has a panoramic picture scrolling horizontally and buttons in the image.
i've got this piece of code for AS2.0
[Code]...
Otherwise it is working all good, but I'd like it to stay put at the start. Right now it immidiately starts scrolling to right unless I move the mouse on top to stop it. So ye, i need to have it sitting still and only scroll when the mouse is at the edges of the document.
Is there a way to set up a background image (repeating or non-repeating) that the stage area floats over. When I use file > publish settings > HTML > publish - It creates the HTML document but any area outside the stage is colored with the default stage color- Can this be set up in Flash or changed in HTML?
[Code]...
I've created a flash website at 960X600 pixels.I have a JPG image that I want to use a BG to fill the browser page.I can edit the index.html file. Should it be inserted there? the name of the BG is bg.jpg
View 6 RepliesI added an image background 1900 x 1200 in dreamweaver, which will serve as my background image for my web site. I would like to incorporate my .flv or .swf on top of my background image. Although, when doing so, the .flv or .swf gets placed under the background image and not on top. How do I place the .flv or .swf file on top of my background image in Dreamweaver CS5.
View 2 Repliesall I want to do is make a scrolling background image like at [URL] how the top left controls where you in the image.
View 3 RepliesIs there a major issue with rendering Flash in Safari?
I have search for a way to display, for example, Adobe Home Page in Safari and be able to see all the menus "on top" and have not found a solution.
I have tried setting wmode to either opaque or transparent but no change.
I am using the latest download of Safari (vs 4.0.4[531.21.10]) on Windows 7.
I have a white stage and my background is non-solid/non-uniform. My flash project will be my whole website, therefore when a browser window is larger than my stage, the stage color (white) shows in the background. Its basically a white border on the left and right. I wish I could continue my background image to cover the whole browser window. What I want to do is: if needed (if the browser window is larger than my stage) continue my background on both sides by taking a copy of my background image, flipping it horizontally, and placing it on both sides of my background. If you can imagine it, this will give a more uniform continuation of the background. I'm guessing actionscript would be the best bet?
View 2 RepliesI am creating my website in the Flash and I am having problems. I need the image on the bottom of my page (background) to resize itself according to window size similar to this site..... like here http:[url]....for example: if i make background with res 1024*768 and somebody will look at it with monitor res 1920*1200 he`ll have image resized to this ressoulution
View 4 RepliesThis is probably an easy task for most of you, but how do i get a transparent image to fade to a background image in Flash? I have several transparent product images (.png or .gif) and a patterend background. I import my .png or .gif image and convert it to a symbol. I drag the symbol on my layer but as soon as i add a keyframe, the product image background turns white and loses it's transparency!
View 1 RepliesI have been struggling with this with CS4 and CS5. I am working on an animation with a couple of characters comprised of several pngs I converted to symbols. When one characters symbols overlap another characters the swf file shows the stage color rather than the background image I have placed in the file. I can publish it as an html with the option of playing it windowless transparent and it will remove this problem. But I would like to just be able to play the swf file without this issue.
View 2 RepliesI want to embed some video into my HTML page. As background I want to use big picture. And above it I want to insert loop video with (i.e.) walking man.So, can I embed video (without flash and any player controls) in page?Can I decode video with transparent background? Is there any codecs which support transparent background (alpha-channel)?
View 1 RepliesI have created a sprite gradient box as my background in my flash as3 file (using tweenmax). As i'm trying to make this a full screen swf on the browser window, i set the width and height according to the stage.
My trouble is that when I resize my browser, the gradient box does not resize with it... it only does when i refresh the window with the new width/height.
Is there a way I can put a redraw function in an event handler that will recognize the window resize? If this is hard to understand... can my background become bigger at the same time as the window is being dragged to a new size?
[Code]...
I am relatively new to Flash CS3 and i have been learning Action-script 3 over the past week. I have come quite a long way and i have made a site in flash but i just have a question.I have been using an image as my background and i am happy with the way flash automatically scales all the objects in my file but the background image does not scale. Is there a way to do this? I have found out things online which show me how to add auto-resizing to the background but this knocks off the flash auto scaling/resizing for everything else.
View 4 RepliesI have converted a large background image (much larger than the stage) into a Movie Clip. I did this so I can make it scroll as the player traverses to the edge of the scene.This appears to make the player free to roam the entire background image.I have a tree symbol with a class attached to it that blocks player movement.Here is my problem:
When I drag and drop instances of the tree symbol onto the background, the trees are stationary and do not scroll with the background.I do not want to have to implement code to make the trees scroll when the background does.I was wondering if there was a way to simply attach the trees to the background so that if the background moves, the trees move with it and appear to be part of the background as if they were drawn into it.It is convenient for me to be able to drag and drop as many trees as i need to block certain routes on the background from the player.I tried writing code to make the trees move but it was only working for the very last tree that I added to the scene.
I am developing a website in flex. And in that, i am trying to set the background image of my application. like this: parentApplication.setStyle("backgroundImage", data.image_src);
From a different location.
My issue is that, the images that i have are small and hence they are being stretched when used as background images. I want to avoid that from happening. How can i do it?
was wondering if anyone could assist me with some actionscript. I am working on a project similar to this (thehideout.org.uk/refuge/) and making the background image move around as if it the scene is a POV.
View 1 RepliesIv got a background image 3 times the length of my stage.. what im trying to do is create a scroller so when you press a right button or a left button, it scrolls to the left third or the right third of the image.
[Code]...
I am using this following code to display images using xml.Everything is working fine for me but i have to add background image or border to the displayed image using function BitmapFileMaterial.
using BitmapData or Bitmap Class but same functionality.
[Code]....
I am making a new flash website and i stack on the as3 part.My site have a menu like all the site do.Now on the site load there is a background picture.When you press one of the menu buttons, the background image will change to this button specified image.But all that in an animation of fade in and out.My problem that i have everything but i cant know which image was before it changes to the buttons specified one. It maybe require as3 which i dont know.I cant upload here my work. its personal.But i ask you the professionals, please make a short fla file which will have the code and animations i need.(if you cant understand me)Please, make a fla file, which contains random 3 images.At the start it will have main background and a menu on it(just text-for fast and short work)The menu is 3 text ine(main,about,contact)now, make that when you press about(for example) it will change the main image(background) to the image of the about page.
View 2 Repliesi cant import the image without losing a huge amount of quality. a friend made this image using Illustrator, and i am trying to incorporate it into a Flash banner.i have numerous images already being used in my Flash movie banner, and all of them have been very easily imported, resized, and animated. here is the image im attempting to use.the Flash banner is am working with can be found at the top of the page at this address.URL..
ive tried to import it to my movie as a GIF, JPG, PNG, BMP, after using Fireworks to successfully edit the image without losing any quality. but as soon as i C&P it or import it directly to the Flash stage or library, the quality goes right out the window.
Does anyone know of any good image effects that can be created with flash mx and photoshop?
One that comes off the top of my head is having an image be drawn in with an outline, then having it fill in with white and then have the full colour image fade in. Another is this one [url]...
I downloaded an image from the web and brought it into Flash. I then created a new layer and began tracing over the image with the pen tool. When all was said and done, I went to use the paint bucket tool to fill in the sections of the paths I created. My only problem is I can't fill the image. I click and click and no color is being filled. I tried converting the selection to both movie clip and graphic symbols and I still can't fill it in.
View 6 RepliesI have created a datagrid in ActionScript class and I want to add an Image to one of the columns..I tried to add an image this way..but it doesnot work.
[Embed(source="../../../../css/images/redCircleIcon.png")]
public static const redIcon:Class;
var statusRedImg:Image = new Image();
statusRedImg.source = redIcon;
[Code]....
What format should I make images into, for an App for iPad? (Each image will be a full page of a children's picture book. I'll create a Flash CS4 movie of the book and then convert the movie to an App for iPad.)
View 1 Replies