I am a beginner at using Flash, so this may be a dumb question, just a warning.
When I create a motion tween and enter in a value for where I want the symbol to go, it never goes to where I entered. Example, every time I try to get a symbol to go from (308, 238) to (308, 233), it replaces the 233 with 218 and I can't figure out why.
I animated eyes blinking inside of a movie clip symbol and placed the symbol on a face outside of the symbol.The eyes are stuck on the first frame. I am using CS5. What do I do?
View 5 RepliesI am following this tutorial, [URL] and everything works until i actually try to place a graphic symbol into another symbol. I am trying to make a character walk across the stage. Flash tells me I cannot place a symbol within itself. Why not and how can i!!
View 1 RepliesI created an illustration in Illustrator, imported it into Flash, and converted it to a movie clip symbol. I added a keyframe at frame 20 and stretched its shape a bit. Then I created a classic tween from keyframe 1 to keyframe 2, and the resulting animation doesn't animate at all; it sits there from frames 1 to 19, and then jumps to the new position at frame 20.
View 3 Repliesthat symbols dramatically reduce the document file size. But, what if only one instance of a graphic symbol is to be used? Can I just use pure bitmap graphics from the library and not symbols in that case?
View 3 RepliesI had made a space background and spinning moon with Flash cs5 for a science project, but after I made the moon spin I tried to drag it in the frame and it won't appear! It just shows a clear symbol box.
View 4 RepliesI have a head drawn in Adobe Flash CS5. I've converted it to a symbol. I want to be able to draw a mouth, add a frame, erase the mouth (without erasing the head), and draw a new mouth, and repeat. However, when I convert the head to a symbol the mouths I draw ontop of it do not show up, and appear behind the head. I know converting the mouths into symbols will fix this, but that would take too long, defeating the purpose of what I'm trying to do.Is there any way to draw on a symbol?
View 1 Replies[URL]
I can't seem to add more than one bone to a "Symbol" but I need to. For example I have the "body" symbol and I need to start the bone at the neck and then drag it to the waist/hip area, but when I drag the bone from the neck area to the waist it won't let me attach the boneto the waist hip area of the same symbol. Why is this? I've seen this done in a tutorial but I don't know how to do it.
How can I rig the character in the image so the legs are attached to a wiast or hip area?
1st bone - Start a bone at the head, then drag to the neck.
2nd bone - Drag the bone from the neck to the waist.
3rd bone - From the waist to the hip.
4th bone - From the hips to the legs.
I am developing a flash movie for a college professor whouses a lot of equations in her presentations. I was wondering ifthere was an easy way to add greek letters and other math symbolsto a normal flash text box, or if it was possible to do anythingremotely similar to this.
View 1 RepliesI have completed a bunch of keyframes with 2 symbol on each moving around. Now I want to add another symbol that will be static. That is, at the same position in each keyframe.
How can I add the new symbol to 250 keyframes that are already set and already have 2 symbols in each?
I can see how to do it one by one... but there must be a better way than that. selecting a herd of keyframes and pasting in the new symbol, ends up only effecting which ever one has the play head.
I also realize I should have put this final symbol in at the start but too late now. So how can I insert a new symbol in 250 keyframes all at once?
Is there anything a graphic symbol can do, that a movie clip can't? So many tutorials I look at, use Movie Clips for so many things, including one frame objects, and buttons etc...So, is there any benefit to ever using a graphic symbol over a movie clip?
View 3 RepliesI have a problem with making symbol when I try to convert several layers to a symbol the regularity of layers will chages.Here is the movie that I captured:
View 7 RepliesI am in the process of updating all of my symbols in a project I am working on, and found that some of the objects are set to temporary paths, I guess I had just imported from the clipboard, as opposed to importing an actual saved file.
Anyway, there is one particular graphic object that, according to my library, is in use in 1 place in my project, but I can't for the life of me find where that is. Is there any way to locate instances of objects in the library? Or am I going to have to go through my entire project, piece by piece?
I duplicated a "Contact" button, movie clip symbol.Trying to edit the text "contact" in the new button but the text tied to the old button keeps getting changed.I duplicated the text symbol that is tied to original "Contact" button.Tried changing the new button again but the link to the old button is the one being changed.I can't seem to find where to unlink the text symbol attached to the original button and then add the new text symbols the duplicated button.
View 1 Repliesim making a flash animation in which i made a symbol called #_mc which is in a symbol called #_anim_mc withhin the sceane.the #_mc contain "#". the #_anim_mc contain motion tween of the the "#" coming in from the left to the right. now within the main timeline i duplicated the #_anim_mc 100 times and i need to switch them with numbers but not all togethor. one by one.for ex: the 1st after 20 frames the 2nd after 28 frames etc. now i dont know how to make changes in each one to time them when to switch to a number. the only think i can think about is to make 100 differnt symbol each one allready set to its own timing.
View 1 RepliesI need to set the X axis 0 to the left of the stage, and I dont know how to do it.
View 3 RepliesAre symbols only supposed to be used when you need 100% exact copies of an object? So if you need to animate an instance of the symbol you can't use the symbol? Is that correct?
View 1 Repliesoutputting a .png sequence, what is the best way? I've had no problem when my animation is in the root timeline. I use the export Movie command and it gives me what I want. But when I have a movie clip, with animation inside of it, and I output a .png sequence in the same way, it doesn't output the sequence of animation from inside the movie ciip, it just gives me a still frame of the symbol on all 35 frames. Is there a better way to export it when the animation is inside of a symbol??
View 11 Replieshow to make a rotating cube for my website, today i tried to make that cube interactive such as making each side of the cube a button. so what i did was instead of using movie clip symbols to construct the cube i used a series of button symbols. the problem soon arises when i tired to fold the panels into a box. It seems adobe flash does not allow me to rotate a button symbol. when the symbol type is "button" all of the rotating parameters under transform are greyed out but as soon as i change it to movie clip i can rotate it.
View 3 RepliesI have a layer with a bullet (graphic symbol) that flys out from the right and stops mid- stage, I am trying to copy this layer and have it do the same thing 3 times, to make 4 bullets that will be the BG for 4 text buttons I will make later, but I want to stagger their timing so they go with a sound effect.I am essentially trying to do exactly like the Duplicate Layer command in After Effects. Is there anything like this in Flash? I have even tried to do the more time consuming process of dragging another instance of my symbol from the library, but I keep getting the message "Do you wish to replace the existing tween target object", which also happens if I try to copy and paste the symbol.
View 3 RepliesRecently I've been working on a slideshow built in Flash CS5. This slideshow features pictures that are displayed when a thumbnail image is pressed down on my the user. I thought it might be nice to have an animated background image. Upon adding it, I discovered that the motion tween is unfortunately governed by the actions panel with code already applied
View 1 Replieshow I can render just part of a symbol without hiding it behind another symbol. I wish to make a marque of symbols... I'm a c++ game programmer so I am familure with ways of specfing with part of a texture to render but I havn't found anything with Flash that looks like I can do the same kind of thing. I'm using CS5 with AS3.0
View 4 Replieshow do i get more than one symbol linked to my class in my SoundClass.as file?
View 3 RepliesTwo related questions:
- Is there a way to click on something in my project---a symbol or a sound clip I have already placed from the library---and find out which particular library element it is?
- Can I play sound from the library window, to preview it before placing?
I have several related projects. If I pull a symbol from the library of one project into another project, and then modify the symbol, shouldn't the changes appear in the original project too? Or is a new, project-unique symbol auto-created that has the exact same name as the one in the original library?I have a multi-scene cartoon with recurring characters, and would very much like to make modifications as I notice imperfections, and trust that the changes will appear in all instances. Is this possible?
View 1 RepliesI have made a movie file symbol with multiple key-frames, such as a person walking, but when I drag this symbol from the library into the stage and preview it, all I see is the first frame of the symbol--it never changes to the next frames.
View 1 RepliesHere is a video explanation:
[URL]
If I use the Pen tool and attempt to draw a line within a symbol, the anchor point on the other end of the line moves [out of my control] to the right. I'm not sure whether this is a bug or a feature, but I'm leaning towards the former; either way
Adobe Flash CS5Mac OSX 10.7.2
my company (FB games) has fired everyone who knew what they were doing leaving me, with no knowledge of flash, staring at my to-do list near tears, unable to complete basic tasks.I need to take an existing walk cycle animation and replace the character with another design. After breaking the new character body into symbols, I've tried to sub them in using swap symbol. The body parts do not line up with the previous symbols, and they also seem to go flying all over the place when I run the cycle. I can't figure out how to just update the symbols without disrupting the placement.
View 2 RepliesI recently started working with adjusting a template with flash 8. Everything went smoothly except for one thing. I changed one certain symbol in my libray and when i exported the movie (after changing) i dont see the changes in my website. Other buttons, symbols etc immediatly show there adjustments and this just keeps on remaining the same?
View 7 RepliesSay I have "Symbol 1" in FLA document "DocOne". I drag this symbol from DocOne's library into "DocTwo"'s library. Now, in DocTwo's library, the properties for Symbol 1 show that the source is "DocOne". I can use the symbol update functionality to update it from DocOne. Is there a way to sever this linkage so that Symbol 1 in DocTwo no longer considers Symbol 1 from DocOne to be its source? So that, for example, if I drag it over from DocTwo to DocThree, Symbol 1 in DocThree, its source in DocThree will be DocTwo and not DocOne?
View 3 Replies
