ActionScript 1/2 :: Moving 2 Different MovieClips At Same Time OnPress Function

Jun 17, 2010

I am using the following code to simulate a volume control bar filling on vol+ and unfilling on vol-. The dragger is a mask that causes the fill to appear and disappear when the mouse is pressed and dragged on the volume controller. It works well, but I would like to add a "switch" that moves at the same time and in the same location as the fill, but on top of it... I created the movieClip for the switch and tried all kinds of variations to the following code with its instance in the code, but cant seem to get it working... below is the code which works with just the mask filling / unfilling.

this.ratio = 0;dragger.onPress = function() {this.startDrag(true, 0, 0, line._width, 0);
this.onEnterFrame = function() {
ratio = Math.round(this._x*100/line._width);
_root.volume = ratio; }; };
dragger.onRelease = dragger.onRelease=stopDrag;

View 3 Replies


Similar Posts:


ActionScript 2.0 :: OnPress Function For Multiple MovieClips In Loop

Mar 7, 2012

I'm trying to make a point and click game for the fun of it. I'm having troubble with the .onPress function. I've made an array of movieclips, and I want to go through them in a loop, and make an onPress function for each of them. What I am trying to do with the code below is to make the debugText tell me what movieclip I pressed:

var letterArray = new Array();
letterArray = [l1_mc, l2_mc, l3_mc, l4_mc, l5_mc, l6_mc, l7_mc, l8_mc, l9_mc,
l10_mc, l11_mc, l12_mc, l13_mc, l14_mc, l15_mc, l16_mc, l17_mc, l18_mc,
l19_mc, l20_mc, l21_mc, l22_mc, l23_mc, l24_mc, l25_mc, l26_mc, l27_mc,
l28_mc, l29_mc, l30_mc, l31_mc, l32_mc, l33_mc, l34_mc, l35_mc, l36_mc];
[Code] .....

DebugText outputs:
Pressed movieclip nr: 36 36 36 36 36 36
No matter what clip i press, i get the same output: 36. why?

View 5 Replies

ActionScript 2.0 :: Loading Movieclips OnPress=function Tutorial?

Oct 29, 2006

I am trying to use the code in one of the tutorials which loads a movieclip.I need to load about 10 clips using the method below, but I can only get one to load. I will also need to make each of them draggable.

Code:

but.onPress = function ()
{
_root.createEmptyMovieClip("container", 1);
loadMovie("square.swf", "container");

[code]....

View 3 Replies

ActionScript 2.0 :: Array.onPress - Add A OnPress Event To Dynamically Duplicated MovieClips ID's Stored In Array List

Apr 15, 2011

lets say i have dynamically duplicated movieClips ID's stored in array list. i want to add a onPress event to them. how do i do it?

[Code]...

View 5 Replies

ActionScript 2.0 :: Moving From OnRollOver To OnPress?

Sep 30, 2009

I know almost nothing about actionscriptAnd here is the actionscript for it.

zone11_mc.onRollOver = function ()
{
zone11_exp_mc.gotoAndPlay(2);

[code]......

View 11 Replies

ActionScript 2.0 :: Make Function To Process Few Movieclips At The Same Time?

Sep 4, 2007

I have a problem when few movieclips calls the same function, every movie clip when it is onMouseOver give to the function their properties witch function process.

If i OnMouseOver a few movieclips at the time the function cant calculate every movieclip alone... Maybe i have to put some array.. ??? i dont know..

On OnMouseOver the movieclips move i random direction and when i passes 15 seconds they return to their original place..

View 5 Replies

ActionScript 2.0 :: OnPress Loop For Multiple MovieClips

Apr 16, 2005

Everytime I press a movieClip, i -1(on the output window) should be equal to the number of the movieClip (ex: myClip17, when pressed, should produce in the output window a value of 17 for i-1). Please copy paste this code to a flash document and you'll see what I mean (please don't forget that you have to have linkage in the library for a movieClip symbol that you have to create - it's a circle only with stroke that has w=15 h=15). Every time I click on a number it should appear a circle on it. If the circle is already there it should disappear. But that's not the case. Somehow every movieClip has the order to attach one of the instances of movieclip marca_mc to myClip31.

var mcAcoplado = [false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false];
var diasDoMes = 31+1;
var distEntreTexto = 10;
for (i=1; i<diasDoMes; i++) {
[Code] .....

View 5 Replies

ActionScript 2.0 :: OnPress Within A Loop (array Of Movieclips)?

Mar 6, 2012

I'm having troubble with the .onPress function. I've made an array of movieclips, and i want to go through them in a loop, and make an onPress function for each of them. What im trying to do with the code below is to make the debugText tell me what movieclip i pressed:

var letterArray = new Array();
letterArray = [l1_mc, l2_mc, l3_mc, l4_mc, l5_mc, l6_mc, l7_mc, l8_mc, l9_mc,
l10_mc, l11_mc, l12_mc, l13_mc, l14_mc, l15_mc, l16_mc, l17_mc, l18_mc,

[code].....

View 3 Replies

ActionScript 2.0 :: OnPress Loop For Multiple MovieClips?

Apr 16, 2005

The problem is: everytime I press a movieClip, i -1(on the output window) should be equal to the number of the movieClip (ex: myClip17, when pressed, should produce in the output window a value of 17 for i-1).Please copy paste this code to a flash document and you'll see what I mean (please don't forget that you have to have linkage in the library for a movieClip symbol that you have to create - it's a circle only with stroke that has w=15 h=15).Every time I click on a number it shouldappear a circle on him. If the circle is already there it should disappear. But that's not the case. Somehow every movieClip has the order to attach one of the instances of movieclip marca_mc to myClip31.

var mcAcoplado = [false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false, false];

[code]....

View 5 Replies

ActionScript 2.0 :: Targeting Dynamic Movieclips For OnPress Actions

Aug 15, 2007

I'm generating movieclips based off of an xml file. The images load fine but I can't figure out how to target them for onPress actions.

[Code]...

View 4 Replies

ActionScript 2.0 :: The Movieclips Appear, But The OnRollOver,onRollOut And OnPress Do Not Work?

Nov 22, 2010

I've created three movieclips to select the next level, and these work fine the first time my game runs, but when I come back to them, after the first game is over and we're restarting, the movieclips appear, but the onRollOver,onRollOut and onPress do not work...

[code]...

View 2 Replies

ActionScript 3.0 :: "TweenEvent.MOTION_START" - Start Moving The Second Movie Clip At The Same Time When The 1st Starts Moving

Nov 28, 2010

I have some simple script that has 2 "movie clips". What I want to do is to start moving the second movie clip at the same time when the 1st starts moving. (both start moving at the same time) I tried the following script but it never works:

[Code]...

View 3 Replies

ActionScript 2.0 :: Adding An OnPress Function?

Feb 16, 2009

I'm trying to add an onPress function to something that I've just dynamically attached to the stage.

ActionScript Code:
item.attachMovie("close_btn", close_btn, this.getNextHighestDepth());

View 9 Replies

ActionScript 2.0 :: OnPress That Keeps Firing A Function?

Feb 16, 2009

I was wondering for personal use how you would go about writing a function on a button that when the mouse click is down it would keep firing the function kinda like it does when using the onEnterFrame on key frame..

View 2 Replies

ActionScript 2.0 :: OnPress Calling A Function?

Oct 8, 2008

I think this is a scope issue, but can't be sure. I am using FlashDevelop, Actionscript 2.0 to create my movie. I call the sendAndLoad() function to display data from a database. I also have "Previous" and "Next" buttons to move through different data.

Since I was going to load data in three different locations (Load, Previous, Next) I created a LoadData() function. This function contains the sendAndLoad() to the server.

The initial load works great with the LoadData() function, the first record is displayed correctly. My problem is when I program the onPress for the Previous and Next buttons.

Why does my LoadData() function not run when inside the Previous/Next button onPress events?

example code:

class Main
{
private var parent:MovieClip;

[Code]....

View 2 Replies

ActionScript 2.0 :: Function Invoke Before OnPress

Apr 1, 2005

[Code]...

when the movie loads, flash immediately 'getURL' BEFORE i press my button1. how come the code execute even before i press it 1st? what's wrong with my code?

View 6 Replies

ActionScript 1/2 :: OnPress Event Function Not Getting Triggered

Jan 10, 2010

I have created different buttons on different movieclip. Then i assigned onPress event on each buttons. But the function of onPress event is not triggered. The arrangement of movieclips is following.

var mainMC:MovieClip = _root.createEmptyMovieClip("mainMC",0);
mainMC._alpha = 0;
var adImgMC:MovieClip = mainMC.createEmptyMovieClip("adImgMC",0);
var offerMC:MovieClip = mainMC.createEmptyMovieClip("offerMC",1);
var offerList:MovieClip = offerMC.createEmptyMovieClip("offerList",0);
[Code] .....

I have created an event as follows:
offerList.onRollOver = function(){
offerList.stopTween();
clearInterval(autoScrlTimer);
} offerList.onRollOut = function(){
duration = 0;
autoScrlTimer = setInterval(automaticScroll,duration);
ovrFlag = true
}
I doubt that the onPress event is not working because of the above piece of code.

View 4 Replies

ActionScript 2.0 :: Function Invoke Before OnPress Button

Apr 1, 2005

Code:
goto = function(where:String) {
getURL("[URL]"+where+".htm","_self");
} button1.onRelease = goto("home");
When the movie loads, flash immediately 'getURL' before I press my button1. how come the code execute even before i press it 1st?

View 6 Replies

ActionScript 2.0 :: OnPress Function Doesn't Work

Sep 10, 2007

my problem is that my onPress function doesn't want to work. Here�s the script: PHP Code:

[Code]...

the hilite function should let the buttons disable or not, but it just will not work.....

View 1 Replies

ActionScript 2.0 :: Dynamically Remove 'onPress' Function

Oct 31, 2007

I have a movieClip in which by default it does not have an 'onPress' function applied to it. However, I have a button on the stage that the user can press to 'unlock' that mc, and when they unlock it, it sets a 'locked' variable to false, calls a function which checks the 'locked' status, and if it is false, it that sets the onPress for that movieclip (which makes it draggable)If that button is clicked again, 'locked' is set to true, and that same function is called again, and then the status is recognized as locked...but I need it to somehow remove/delete the 'onPress'function. I know the first thought would be to just set 'enabled' for the mc to false...which I tried at first.... but the problem is that some of the mc's are transparent in the middle, and there can be other items below them...and those items below need to be 'clickable'. Even though the top mc is not enabled, it still recognizes that it has had an 'onPress' function applied to it, and thus won't let anything below it be clicked. (When the movie first launches, the function setting the onPress has not yet been set, and so the items below it are therefore clickable).

I know that might have been a bit confusing, so let me know if you have any questions to further clarify. need to make a movieclip that was clickable (through an onPress function) onClickable, but also treat it like it has never had an onPress applied, so that any items below it can be clicked.

View 2 Replies

ActionScript 2.0 :: Pass Variables To Onpress Function

Jun 16, 2008

[Code]...

I need to be able to pass variables to my onpress function.

View 10 Replies

ActionScript 2.0 :: Change The Function From OnPress To OnRelease?

Aug 22, 2009

I have some script for a sliding gallery and buttons to move the images. how to change the function from onPress to onRelease so I can animate the button.

this.onEnterFrame = function(){
if(rewind == true && counter > 0){
counter = counter - 1;

[Code]....

View 3 Replies

ActionScript 2.0 :: Creating Controls - Button OnPress Function

Jan 9, 2010

I'm doing a school project in flash that basically has to be a movie trailer, just several photos compiled together with some music. I got bored and now am making controls in Actionscript. I'm using CS4, however I have the document based in Actionscript 2.0. Basically, I have created a rewind button that goes backwards, however now I want it to do one of the two things:

If the video was playing when the button was pressed, I want it to go back to playing when released. If the video was paused the the button was pressed, I want it to continue to stay paused when released. I've tried some very basic if statements, trying to assign boolean statements, but I'm stuck. Here's what I have thus far for my rewind button:

Code:
rewind_button.onPress = function () {
onEnterFrame = function() {
prevFrame();
}}
rewind_button.onRelease = function () {
delete onEnterFrame;
play();
}}

View 3 Replies

ActionScript 2.0 :: Slider Bars - Dragger.OnPress Function

Mar 4, 2005

I am currently working on the Slider Bars tutorial at [URL]. I got dragger to work, I just want to better understand the dragger.onPress=function() part. With a normal function you have:
function hello(){
trace("hello");
}

Then when I wanted to run the function, I would use:
hello();
Ok so if dragger is pressed (onPress) then it creates a function, right? So how do you run the function? Or is the function running as I'm pressing dragger?

View 3 Replies

ActionScript 2.0 :: Load Pictures And Give Each Of Them A OnPress Function?

Nov 4, 2005

I'm loading pictures from an array, each picture gets his own onPress function[code]...

View 3 Replies

Data Integration :: XML Link - Calling Function To GetURL OnPress

Jul 5, 2006

I am creating a gallery type site, I am loading xml data externally creating duplicate movie clips and it all works fine, my only problem is I want them to go to a URL, I have one of the nodes with the URL and in my actionscript I am calling a function to getURL on press, the problem is on each separate movieclip it links to the URL of the last movieclip in the stack.

View 1 Replies

ActionScript 2.0 :: OnPress GetURL - How To Prevent OnRollout Function Running

Jun 14, 2006

When I use:
on (release){
this.stop();
getURL("page.html", "_blank");
}
Why is it that when that new page window is loaded the background flash window then runs my
on (rollOut){
this.play();
}
function? I am trying to pause the timeline I am clicking from in Flash. If I take this line out (this.play() it pauses, but if I were to go that way how would I start getting my MC to play again when the user gets back to the flash window?

View 3 Replies

ActionScript 3.0 :: Moving MovieClips From One Spot To Another

Dec 16, 2011

I know how to move movieclips from one spot to another with a click of a button. I want to go further. After a few seconds, that movieclip will move again to another spot. So, with one click, my movieclip will move to one spot, and then after a few seconds will move to another spot.

View 6 Replies

ActionScript 3.0 :: Moving Movieclips Using Trigonometry?

Apr 16, 2011

I have this game where a movieclip moves towards the mouse point by finding the difference and dividing by its "speed". This isn't very good though because different users will have different cursor speeds. What I really need is a method that finds the angle between the two points then uses that angle and a "speed" to calculate the next position of the moving movieclip.Here's something along the lines of what I am looking for but it doesn't quite work?The function runs and everything. All that works, it's just the maths that isn't right.Something needs changing with the maths.

ActionScript Code:
function moveCircle(e:Event):void
{

[code]......

View 4 Replies

ActionScript 2.0 :: Why Movieclips Are Moving At Different Speeds

Apr 14, 2010

why these two movieclips are moving at different speeds? I would like them to be moving at the same speed (while increasing xspeed every second).

actionscript 2, flash mx.

Code:
var xspeed = 1;
countDown = function () {

[Code].....

View 7 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved