ActionScript 2.0 :: Array Button Menu That Changes MovieClips With Tweener?
May 19, 2009
The first on is using the Tweener class and everytime that I press a button it fades out the loaded content of the previous selection, waits for it to finish and then loads the content of the button pressed. Everything works fine with this part.
The second code is the on that is using an Array to dynamicaly rollover, rollout and keep selected the buttons.It was also changing the content of the mc that everything is loaded on but without this fancy fade in - fade out..
Code:
import mx.transitions.*;
import mx.transitions.easing.Strong;
var FADEINSTART:Number = 2;
[code]....
Ive managed to make the previous mc to fade out but cant really make everything work properly..
The first on is using the Tweener class and everytime that I press a button it fades out the loaded content of the previous selection, waits for it to finish and then loads the content of the button pressed. Everything works fine with this part. The second code is the on that is using an Array to dynamicaly rollover, rollout and keep selected the buttons.It was also changing the content of the mc that everything is loaded on but without this fancy fade in - fade out...!!
The first on is using the Tweener class and everytime that I press a button it fades out the loaded content of the previous selection, waits for it to finish and then loads the content of the button pressed. Everything works fine with this part.The second code is the on that is using an Array to dynamicaly rollover, rollout and keep selected the buttons.It was also changing the content of the mc that everything is loaded on but without this fancy fade in - fade out...!So i think its time for some code now...:
Code: Select allimport mx.transitions.*; import mx.transitions.easing.Strong; var FADEINSTART:Number = 2; var FADEINSTOP:Number = 7;
[code]....
Ive managed to make the previous mc to fade out but cant really make everything work properly...!
I am trying to create a hidden, rollup/rolldown menu, that once rolled on animates up and then exposes thumbnails that will be wired in a gallery type setting. I have hit a roadblock and farily new to As3. I'm pretty sure I'm doing something simple wrong, but I can't for the life of me figure it out. Can anyone please shed some light? I feel like there needs to be a course just in flash output errors! I'm thinking the problem is with my addThumbs(); function, but before this mass of errors, my Sprite was the source of new errors - I thought that it would be an easier option to place all of my thumbnails inside a container and then manipulate that containers alpha or presence than indiviudal items.[code]
I must say I'm pretty new to AS3.0 and last night I tried to develop this accordion menu. It's not XML driven nor does it use AS3.0 to create each "button". What I did was create individual "menus", basically like drop down menus, and converted them into separate movieClips. Also inside of them there's a button movieClip which is the larger one that opens the menu (instanced "btn"), a reference movieClip called tabHeight to define its height - since it can depend on the number of "sub-menus" you have - and a tabMask that onClick (is supposed) to open and reveal the "sub-menus" while making everything move according to that change. I want it to basically start with all menus closed and onClick it reveals each menu, making the necessary y movements. I am getting some errors and I can't make it to work.
Code: Select allvar growingTab:Object; var reducingTab:Object; var tabArray:Array = [tab_0, tab_1, tab_2, tab_3]; for (var i:int = 0; i < tabArray.length; i++) { var tab = tabArray[i]; [Code] .....
I am trying to create a buttons menu with Array, and for some reason it only show the lastone on the list.
Here is my code (AS3): var nav1Items:Array = new Array("about", "work", "contact"); //Create text field var myFont:Font = new Calibri(); var myFormat:TextFormat = new TextFormat(); var label_txt:TextField = new TextField(); //Set text style [Code] .....
I've gotten code that would circle through this with menu without an array, but I have been looking trying to complete it for the sake of better learning about arrays.
I have 3 buttons and I want to use the up, down, arrow keys to cycle through the buttons. So far I have the code to switch the up state once they are clicked on but I am unsure how to incorporate the navigational aspect into the array and have it cycle through.
Below I have posted my file with actionscript. Here is the actionscript set up right now:
Basically, I have a button and on click it displays a menu. I want to click that menu a second time and the menu closes. Currently, every time you click the button, the menu reopens. I pasted the Flex livedoc example below. If you click the button, the menu keeps reopening.Now, I rigged it up by setting a var to open and closed, so when clicking the button it does a check. However, if you click away from the screen, the HIDE event gets dispatched, and the menu closes. This messed up the open close var being set.
How could I make this Flex example below show the menu on button click, and then on a second button click, it closes the menu? Take into affect that if you click away from the menu, it closes it.Also, I played around with the MOUSE_DOWN_OUTSIDE event for the button and set the preventDefault, and the FlexMouseEvent event.cancelable is set to false.Changing to a PopUpMenuButton is not an option. I have to much skinning involved.Here is the Flex example:
<mx:Script> <![CDATA[ // Import the Menu control. import mx.controls.Menu;
I'm making my new photography site, and it's going to be entirely in flash. I'm an intermediate flash person, but there is something I'd like to do with my menu that I can't figure out how to do. I'm going to have 4 buttons:
I would not have asked the question if I owned an iphone, but so far I only have an android phone for development.
The question is: Should I use the View.viewMenuItems that are provided by flex mobile? Or should I better embed the functionality in another way? I don't know what possibilities might exist on iphone to open the menu, because it has no hardware button "menu".
By the way: How could I open the menu in the Flash-Builder mobile device emulator - there are no buttons, too..
I received help on this site on this info-graphic im doing and the solution was to use an "array" which im not familiar with at all. the person that helped me added the following code that worked:
var city_arr:Array = new Array("louisville");//filll that array with all nedded cities//make all the boxes invisible at startfor (i=0;i<city_arr.length;i++){ var [code]...
since i dont know how to use arrays im stuck. i need to add at least 30 more cities to my info-graphic but don't know how to use the naming conventions of an array.Only one of the houses works (when you click on it a pop-up appears, is draggable and has an x to close the pop-up)
I am building a menu and for each button of the menu, subbuttons apear beneath it along the menu. And I am having some problems. Each of the menu buttons has animations for rollOver and rollOut. What can I do so that when I move over the subbuttons the menu button won't start the rollOut animation. I have to extend the hit state. If I put the subbuttons in the same movie clip as the menu button, the animation would be bad because I am doing width, height, x and y tweenings with ActionScript and addind something the the clip would change these properties. Pls help.
Is it possible to extend the hit state of the menu button in some way ?
how to jump from one frame a movie clip, rot menu, to a frame of another, main, through a button in rot menu, rot menu is a movie clip in symbol 1 which is in another (cant remeber) in main. from frame 1 of main i want the button to be pressed and it takes you frame 2 of main.
I'm making a menu system that uses sliding movie clips instead of separate pages - [URL]. But when you click on the 'study at UWS' button, the nested slider kind of goes nuts, until you press on of the side buttons.
ActionScript Code: var currentLink:MovieClip = a_mc; //buttons mode[code]...........
when i click on the button the alpha of this button will be 0.5 , when i click on another button the alpha of the previous button is still 0.5 , and so if i clicked on all buttons the alpha of all buttons will be 0.5,,,i didn't want that , i want when i click on the button , alpha return to 1 for the previous button .
i new to actionscript and am not sure where to begin so i will explin what i would like to do. i have a myspace site that i have created a div overlay with...<a [URL] now what i would like to do is use actionscript so when you click on the menu button a image wil pop up in the ipod screen and when u click the play button something else will pop up
This is something that is probably really basic but for the love of gawd I can't remember how to do it.
Example: 3 menu buttons, you press the first button and it executes a function and disables itself leaving the second and third button enabled. You then press the third button and the first button gets enabled while the third button is disabled. Same thing goes for the second button.
Is it possible to load up an array with movieclip instances from the library and use that as a reference to go to a certain index, snag that mc, and display it on the stage?
I have 2 arrays i.e.:[code]Is it possible to set the color of the moviceclips (mcclipsArray) to the relevant colors from the second array (mcclipsColorArray), so movieclip a becomes blue, b becomes red etc.
I'm having problems making a loop of different movieClips. I've been able to find info about duplicating the same movieClip but I can't seem to get it to apply to this. This is what I am working with: I have 13 different movieClips of an animated character. They are titled montyDog_mc, montyBear_mc, montyCat_mc, etc. I also have a next and a previous button. What I need to happen is for the movieClip animations to cycle through, one at a time, each time the user clicks the next or previous button. I think I should be creating an array of some sort but I am very confused about how I list the movie clips in an array and apply it to the button.
This is what I have: montyArray = new Array(); montyBear[0] = "montyBear_mc"; montyBee[1] = "montyBee_mc"; montyCow[2] = "montyCow_mc"; montyDog[3] = "montyDog_mc"; [Code] ..... Am I targeting the movieClips properly?
Just started to make the switch from AS2 to AS3 and am having a few problems, most of which I've managed to fix but this one has got me stumped.
I'm trying to create some buttons dynamically that are spaced out evenly.The clip is in the library and exports as NavButton. I've created an array with all the button clips inside it. This is called navButtonArray and when traced shows the NavButton clips. My problem is when I try and add them to stage. I can't tell if it's only adding 1, or just placing them in the same place, or if it's continually replacing the previous navButton.[code]...
I'm creating multiple movieclips, containing a TextField and an image as a background. In order to keep track of them I'm storing them in an array. The problem is that I can't add the movieclip to the screen >.< What I'm doing is
PHP Code: addChild(movieclips[0]);
but it's not displaying. I know it's not the movieclip as I can addChild that and it shows, but trying to call it out of the array is not working and it's REALLY frustrating the nark out of me .How do I add the selected movieclip out of my array?
Ive created a array to hold an instance of the Zombie movie clip, the movie is given an instance of "Zombie" + 1, 2, 3..... But now i can't work out how to add the movie clips from the Array to the stage. [code]...
Is it possible to instantiate MovieClips that exist in the library (that have been exported for actionscript) with a for loop using an array that holds their link name?
var fruit:Array = new Array("apple", "banana", "blackberries"); for (var i:int = 0; i < fruit.length; i++) { var aFruit[i] : fruit[i] = new fruit[i]; }
