ActionScript 2.0 :: Play Random Keyframe To Keyframe In MC?
Mar 29, 2006
i am creating a game now this is complex but i have been told by my fellow actioncript co worker that its doable, What it is i have a game "Reaction Tester" and It is inside a car going along the road so its psudeo 3d and i have the "walls" and road sorted now i want a movie clip in the road to throw out random objects From a Movie clip, now i will call them from frame names, say..
frame 1-10 is a tween with a box coming down and then frame 11-20 is a cat and frame 21-30 is a hole in the road Etc i want it to call a random frame to frame, to play
View 1 Replies
Similar Posts:
Mar 15, 2012
I have a simple flash that has 2 layers 2 images. one image is on the first frame and the other image is on the second keyframe. Actionscript starts on 1st keyframe. What I have it doing is loading frame one stop() reads the actionscript checks the date if the date is met it goes and stops on frame 2 and plays other image:
Everytime the flash refreshes it plays frame one then jumps to frame 2 if the date is met. How do I avoid playing frame one if the date is met what it's doing is playing the first image before the date change and a split second after it plays frame 2. (you see a hiccup)
i need the flash to "preload, check the actionscript before it loads if the date is met automataclly go to frame 2 avoiding frame one all together.
actionscript used on frame one:
stop();
var year:Number = 2012;
var month:Number = 3;
var day:Number = 22;
[Code].....
View 1 Replies
Mar 20, 2007
i'm making a game and to score some extra performance im rendering every frame of every entity into an array of bitmapdata's the first time the frame is seen, and it works well, but its wasting alot of memory because we have alot of animations, and most of them are double framed at least, so more than half of the bitmaps could be ignored if there was a way to determine if a frame is a keyframe or not
View 3 Replies
Mar 16, 2005
When I place some codes in a keyframe, these codes are showing on all the following frames up till the next keyframe with codes. My question is, does Flash execute codes only in the keyframe or it execute whatever is in the frame regardless whether its a keyframe or not?
View 1 Replies
Dec 6, 2004
Basically, i'd like to set up a timeline with say 10 movies. When the page loads, i'd like the flash to randomly select from some predetermined keyframes (obviously where each movie starts) and when that movie ends, jump to another section of the timeline. This way, the loading of the movies is somewhat seamless and it looks like i've made 10 different flash movies.Even if it's not possible to all load from the same timeline, i'd like to have it play the first movie, then when it reaches an ending frame, it loads another random movie from a directory on the server, and then keeps going and going until it can't stand it anymore.
View 4 Replies
May 11, 2003
Before I ask let me explain the swf. Basically I have a logo (mc) on the first keyframe. Then I have like four more keyframes each containing a different movieclip with that some logo with different animations. Now what I want to accomplish is. onMouseover I want to randomly jump to any of the keyframes containing the animations. To give the effect of a random animations on the mouseOver event.
View 4 Replies
Jun 8, 2007
I am creating a web site for a kitchen company, there are differen images as headers on each page. But on one of the pages they want a flash animation to slideshow their kitchens. The animation is done, but they want it to start on a random kitchen. I have only started using actionscript and am struggling a bit, I've managed to find some coding, but they don't seem to work. What I'm looking for is a code to sit in the first frame to randomly select either frame 2, 12, 22 or 32 to go to and play on from there.
View 9 Replies
Oct 28, 2004
I've searched everywhere and I can't find the answer.I've got 10 keyframes with a image on each one. When the user clicks the button i'd like it to go to a random keyframe
View 2 Replies
Oct 28, 2004
I've got 10 keyframes with a image on each one. When the user clicks the button i'd like it to go to a random keyframe.
View 2 Replies
Feb 15, 2003
I have been trying to get 4 random letter generators to work at the same time as they all load on keyframe 60. However only one will work while the other 3 dont ever show up. I have given an example below if someone could let me know how I would get it to work. I've tried changing the variable 'x' to 'a' but for some reason it still won't work.... i want the result to be 4 random generated buttons that will be used for my menu.
View 11 Replies
Feb 16, 2009
I made a button within a movieclip.The movieclip name = OurKlips-mainThe scene name = oneWhen I hit this button, it changes two frames in the html part (This works)Also, I want this button to play frame 30 from the root scene, titled "one"on (release) {getURL("content-ourklips.html", "content-txt");_root.gotoAndPlay(30);}
View 2 Replies
Mar 16, 2009
I have a script that plays a sound on that keyframe. You see, the movie loops. So it keeps hitting that keyframe and the sound keeps playing over and over again. How do I stop this? what kind of script? I want the sound to still loop when it's over, but I dont want it to play again on that keyframe. Only when it's over.
View 1 Replies
Dec 6, 2004
i think i may have a challenge for you. I would like to have a flash movie load to a random keyframe in a timeline when the page loads. Basically, i'd like to set up a timeline with say 10 movies. When the page loads, i'd like the flash to randomly select from some predetermined keyframes (obviously where each movie starts) and when that movie ends, jump to another section of the timeline. This way, the loading of the movies is somewhat seamless and it looks like i've made 10 different flash movies.
Even if it's not possible to all load from the same timeline, i'd like to have it play the first movie, then when it reaches an ending frame, it loads another random movie from a directory on the server, and then keeps going and going until it can't stand it anymore.
View 4 Replies
Jul 12, 2011
I have 2 keyframes on my timeline.The first keyframe has an input text field (instance name: inputTxt) and a button (instance name: btnTester).When the user clicks the button it takes them to the second keyframe where their text should be displayed in a dynamic text box (instance name: txtBox).I get a null value in keyframe 2.
View 3 Replies
Feb 4, 2010
I have a movie clip that is about 30 frames long. I've placed an instance of it on the main timeline and it follows a motion path. My motion path ends after about 20 frames. At this time, I've inserted a keyframe which is preventing my movie clip from playing the remaining 10 frames.
I tried adding an ActionScript layer where the last keyframe is and it reads:
instance.gotoAndPlay (20)
Doesn't seem to work. Just a note that this is around frame 292 of the main timeline. Also note, a new keyframe begins on another layer with a different movie clip.
View 5 Replies
Aug 13, 2009
I have a play button (instance name - play1)
When I click it I want it to play a short movie clip (called - introExpandMC) then for it to move on to frame 2 of my my main time line.[code]...
View 5 Replies
Jul 28, 2010
I have a movieclip (a), inside another movieclip (b), on the main timeline. I want to click on movieclip (a) and make it go to and play a keyframe on the main timeline. I'm used to using buttons for actions, not movie clips, and I forget how to use the _root thingy.
View 3 Replies
Mar 22, 2010
I am currently using Flash CS4. Trying to do a very simple redirect via a password. What I want to do is whatever password they enter (variable defined as code) I want it to direct them to the keyframe. The below works if they enter hi (sometimes it seems to work sometimes not). The password "no" does not seem to work. I have attached simple fla based on the logic I am using.
[Code]...
View 6 Replies
Jun 17, 2009
I've been manually creating a slideshow with flash (I like my final product better than the auto-approaches), and have reached a sort of odd situation.When trying to insert a new keyfram at fram 1675 of my animation, instead of a new keyframe, I'm getting my last keyframe's run (from 1650) extended to here.Is there a per-layer keyframe limit?And is there an FAQ that would cover this (fairly obvious seeming) question, rather than posting?
View 7 Replies
Jul 6, 2009
Can I load a swf to a specific keyframe on browser refresh or if sent to another page on the site?Each page will have the same .swf header and I'd like to highlight or animate the header based on the new html page selected.
View 1 Replies
Oct 13, 2010
I'm working with Flash CS5 and a Wacom Intuos3 tablet. In my first time working with CS5, I set up my hotkeys on the tablet to what I normally have when I'm doing frame-by-frame animation in Flash. I have one button set to F6, which used to add a keyframe wherever my playhead was on the timeline. What I prefer to do is scrub to where I want the next frame using my scroll/strip and just hit the F6 button where I want a new keyframe. But in CS5, what's happening is it's not adding any keyframes at all, but instead moving my playhead back to the last keyframe I edited. What's going on? I can't even scroll to where I want and add a keyframe without physically clicking the frame itself and THEN pressing F6.
View 1 Replies
May 26, 2011
I've inherited a flash project @ work and I need to save a keyframe as it's own .swf file, but I don't recall how to get Flash to do just that.
The flash .fla file seems to hold multiple keyframes that need to be saved as their own .swf files, which are referred to in the Actionscript by name.
I've figured out the editing, but this business of keyframes i've forgotten how to manipulate.
View 4 Replies
Nov 2, 2011
I am making a simple project ,a so called "quizz" .SO as every questions has wrong and true answers buttons I am wondering how do I go to the previous keyframe.Let me be more clear. I have this "screen" with a button that appears only when you click the "wrong answer" on a question,the screen has a button that will lead you to the menu to start a new game,but I realized that would be very ANNOYING ,because if we are at question 30 [we pretend] it would be very frustrating to start all over again.So I am wondering what code do I need to write to the Screen with the "start over" button that leads to menu to make it lead me to the question I Answered wrong. I want to say that I tried something like "on (release) { gotoAndPlay ("previous") ;} but didn`t work To be even more clear I will show you on this picture.
View 3 Replies
Jul 2, 2009
I'm using a handy-dandy script that allows me to scroll a masked movie clip with ease. I ran into an issue, however, when I wanted to scroll two different movie clip instances � each with their own separate scroll bar � in the same keyframe. I tried giving unique names to all of the elements in the second instance, but it hasn't worked. A non-functioning example of what I'm trying to accomplish is attached. [URL]
View 3 Replies
Mar 21, 2012
I am in the end of my development of a script that parses out large amounts of data from the timeline with AS3. This data is then used for an animation in corona. We have several of animations in the timeline, and we are splitting those by frame labels. That means that all objects are in place and often, there is no use of them and those movieclips is missing keyframes. My script parses out everything, but I just want the data thats has some value.
detect if a current frame in a layer is a keyframe or not? If not, get rid of data that we are not animating.
View 1 Replies
Dec 5, 2005
i got some trouble here that I cant seem to find a solution, well, I dont even know what happends here.
The goal: Make a puzzle-like with 54 MCs
What it should do:
- Come to front onMouseOver swapDepth(1)
- Go to back when onMouseOut swapDepth(-0)
This is working...
I cant seem to understand why my MCs are still appearing on another keyframe when I click the button "2"
Btn "1" goes to the puzzle. Btn "2" goes to an empty keyframe but there are some MCs that are still visible when they should not be.
View 7 Replies
Mar 21, 2011
Is it possible to export each individual keyframe to individual swf?I have lets say 100 keyframes on main timeline. Can i export them in to own swf-s so i get 100 swfs?
View 3 Replies
Dec 17, 2009
I am making a comic in Flash CS4 using AS2 and I'm trying to figure out how to add a quick crossfade from one keyframe to the next. When the user presses the "next" button, I want the current image to fade down and the next image to fade up. The images are arranged so the heads and text are positioned to the left and right, so as one head fades up the other would fade down, see picture below. It's a conversation.
I understand how to do it if the scene plays automatically, but I want it to stop on each keyframe so the user can take their own time to read the text. I'm just starting out and used another tutorial to come up with the AS that is controlling it now. That AS was written when all the keyframes were in a row next to each other. Now I've adding some blank frames between them to create space for the Tweens, but I don't know how to modify the AS so it steps from keyframe to keyframe. It's still stepping though one frame at a time.
View 3 Replies
Nov 16, 2010
I've got a picture which moves when you roll over and goes back to the original setting when roll out.
achter_mc.onRollOver = function() {
colour_mc.gotoAndPlay(2)
}achter_mc.onRollOut = function() {
colour_mc.gotoAndPlay(35)
}
What I want is a background sound. I want, when I rollover the picture, the backgroundsound starts playing and when you roll out, the sounds fades. Not that the sound just stops playing, but that it really fades. I don't know how to do it because it should be dynamic, I only know how to link a fade out to a keyframe. But that isn't the case here because someone can hold it's mouse for example 2 seconds on the picture or half a minute or 26 seconds. In all of these cases I want the music to fade out when they roll out of the picture (the picture is a movieclip ( achter_mc)).
View 4 Replies
Sep 23, 2008
I want to to have 3 x 3 Frame Keyframe animations (very simple) with a title keyframe in between each one. What I am struggling with is that instead of repeating the keyframes lots of times and having a huge project I want to repeat each 2 Keyframe animation 30 times (making it a minute long) before moving onto the text keyframe and then the next 2 keyframe animation to loop 30 times before moving on... I then want the whole thing to loop.
What code do you use in Flash CS3 (ActionScrpit 3.0) to acheive this for each set of keyframes? To keep it simple they are all one one layer.
View 1 Replies
