ActionScript 2.0 :: Timeline: Play Up To A Certain Point?
Mar 8, 2010
I have a timeline with 100 frames. It is basically one long animation. I have keyframes on frames 1, 25, 50, and 75.I have 4 different buttons. If the user clicks one, it will go to a specific keyframe. For example, if somebody is on the frame 50 keyframe, and they click on the button that sends them to the keyframe on frame 25, instead of just jumping to frame 25, the animations plays from 50 all they way to the end of the timeline, starts over and stops at 25. ( The animation is a spinning wheel that always spins the same direction if that helps visualize)
They could click on any button, from wherever they are, and the animation will play to the specific keyframe.So, basically a script that says, "play until the playhead reaches a certain frame (or label) then stop. I obviously cannot use a simple 'play', and have a 'stop' at the frame I want, because where the animation needs to stop will always be different.
View 4 Replies
Similar Posts:
Apr 24, 2009
In the Main Timeline I have
Code:
import FlashVar;
// Instantiate FlashVar Class and Pass Root.
[code]....
View 2 Replies
Oct 4, 2009
I am working on creating a photo gallery and I am having an issue trying to figure out how to add AS3 code to link buttons to a point in a timeline. I have 5 buttons each with an alpha transparency change that works fine and now I want to establish an action on each button that on CLICK will bring up a particular photo in my timeline.
View 1 Replies
Feb 3, 2011
In the Main Timeline I have
Code:
import FlashVar;
// Instantiate FlashVar Class and Pass Root.
var myFlashVar:FlashVar = new FlashVar(this);
trace(myFlashVar.getVar('myFlashVar'));
[code]....
Now I have to pass 'this' when instantiating the class so that later I can use DocRoot to get the loaderInfo for FlashVars.Is there any way to not have to pass 'this' and have the external class point to the Main Timeline?
View 1 Replies
Dec 6, 2009
I am very much new to AS3 and Flash and had a problem trying to get my Flash timeline to pause at a specific point if the mouse was over any part of the stage. If the mouse was not or no longer over the stage I wanted the timeline to continue playing where it had left off.
I managed to solve the problem after a few hours and would like to share my first piece of AS3 - it might help someone else who has a similar problem, or you might be able to improve it.
One of may main objectives was to make sure the code cleaned up after itself and left no listeners or timers running.
[Code]...
View 2 Replies
Apr 9, 2004
I am trying to use a sound controller in a flash movie to play music and I am using loadMovieNum to load the sound controller movie at a particular point in the main timeline. I get the sound player to load up fine and the sound loads fine when a user presses play, but about a minute through the song the sound starts to play again, overlapping the song that is already playing. This happens with no user interaction...it just takes about a minute. I also noticed that it is only when the sound player is within one of the movies. It doesnt happen when the sound player is all by itself. Is there something in my movie that is making it loop over? What happen to the search that used to be at the bottom of the page?
View 2 Replies
Dec 21, 2010
I have a set of MP3s that I am playing randomly (SoundA = random number in this script below). I created a play, pause, and stop button for the MP3. The play and stop buttons work perfectly, but I am having problems with the pause button... It does stop the MP3 when clicked, but when play is then clicked after pause, it restarts the whole MP3 rather than starting where the MP3 was paused.
[Code]...
View 2 Replies
Oct 24, 2011
How can I load movie(1.swf) into the current file and make it go play the specific cue point (of the child's file)?
on (release) {
loadMovieNum("1.swf",0);
// Seek to Cue Name Behavior
[Code]....
View 1 Replies
Jan 19, 2010
I've created a video player using the flv component. I have images of cue points. The user should be able to click on an image and the video should skip or start at that cue point
View 9 Replies
Feb 26, 2010
Basically the code below has been designed so that a video starts at 52 seconds (rather than the beginning) when you press play. It works good right now, starts where it's supposed to, but I want to change the code so that it autoplays the video starting at 52 seconds. The problem with this though, is that when I try and set it for autoplay, the video starts at the beginning and doesn't wait for it to load to 52 seconds before it autoplays. Any input on the coding? I need it just so that the autoplay doesn't kick in until the video is loaded to the 52 second point
import fl.video.MetadataEvent;import fl.video.VideoProgressEvent;
import fl.video.*;
my_FLVPlybk.addEventListener(VideoEvent.COMPLETE, rewind);function
[code]....
View 3 Replies
Jan 8, 2011
i have an animated title that i would add some blood to roll across the title (as a flash movie clip) and then stop at a certain point - Forever!
addEventListener(Event.ENTER_FRAME,myFunction);function myFunction(event:Event) { blood_mc.play(); blood_mc.gotoAndStop(20);}
This is what i have so far but the blood does not play then stop/pause when the blood reaches the bottom point of the title ( like its meant to) just the end frame of the blood on the title is displayed - no movement can this be done.
View 3 Replies
Feb 2, 2012
Is there a way to allow a user to move playhead to any point on the progress bar (including much ahead of the loaded portion of the movie) and resume play from there? Presently a user can skip ahead only as far as the download happened.
Just in case there is no conflict with my set up, here is the code I have:
[Code]...
View 2 Replies
Jan 25, 2011
If i broadcast a video and divide it into packets, and when a users connect to the netgroup and receive the object from the group( the user will receive from specific time let say actual video is 10 minutes and user connect to the group, and seek video for last 5 minutes). how can i achieve this task. is it possible ? i am using flash player 10.1
View 1 Replies
Nov 4, 2010
I have a scale up and down function that increases or decreases the size of an external loaded image inside a loader. What i am now trying to do and having trouble with is playing certain messages when the scaling reaches a certain point.
For instance when the user uses the 'increaseScale' function and scales 'image_Content' up by 40% its original size then 'warning_msg.visible = true;'
When they increase it by 65% then 'stop_msg.visible = true;'
This will then respond the same way if the user decreases the scale back to 40% and so on.
I cannot work this one out, i have posted the code below and have attached the fla file...
Code:
//------------------------------------------------------------------------------------
// Messages
//-----------------------------------------------------------------------------------
[Code]....
View 2 Replies
Feb 14, 2011
My Original Post:I have been designing a visual presentation in Flash CS5, there are a few movie clips on the stage that are set to play at a certain time/frame. The problem I am having is that I am not familiar with coding/actions. I want to have a play and a pause button so I can pause at any point (not a specified frame) and discuss with the audience. Then I want to be able to click the play button to resume from that point (wherever I paused from). I hope to get help and be able to learn from your answers. I don't know how clear my question is, but I can clarify if you need me to... A Reply:you can stop/play any movieclip by using the movieclip's reference:
[Code]...
View 1 Replies
Oct 7, 2011
if i click 'Play' Button video playing normally, after i click 'Pause' button video pause, next i click 'Play' Button video playing from starting point. what is the problem
solution pls...... Code:
[Code]...
View 2 Replies
Oct 17, 2011
start a video playing from a precise point in time?Using rtmp protocol to stream a video:rtmp:\my-servervodmy-video.mp4is it possible to use a similar form, as the following:rtmp:\my-servervodmy-video.mp4 =00:20:21to start video file from that point?
View 13 Replies
Sep 30, 2008
[URL]about 30 seconds into this flash, there is an FLV of a computer screen. The problem is, when I pause the swf, the flv keeps going. How do I get around this?1. Is it possible to convert the flv to swf?OR2. Is it possible to control the flv from the main timeline?
View 7 Replies
Feb 24, 2010
I'm working with AS3 and I have two questions. First, to save on having to re-do work, is there a way to simply play the timeline in reverse IE from frame 210 - 200? I've got a page set up to slide in from the right when clicked on, and if you click on the back button, I want the page to slide out to the right again. Figured the easiest way to do this would be to simply reverse the timeline. Just don't know if that's possible in flash.
Secondly I've got it set up in the timeline for a FLVPlayback component to slide in to the center of the stage from the right when its page is clicked on and though this works in the timeline, when I test the movie, it doesn't slide in and if I expand the preview to full screen, the flv and its controls are still on the right side of the stage. how to get the movie to slide in properly?
View 1 Replies
May 6, 2009
I would like to be able to skip some frames using functions. For example:
When you press a button created, the timeline jumps to (and plays) from frame 9 to 24 and then it immediately jumps to frame 110 and so on...
So. I would need a code for the "from - to" function. And the other question is about creating a function like that:
do this then do that then do that...
View 1 Replies
Jun 18, 2009
I have movie clips, animation, streaming voice over, and event music and sound fx on the timeline. I have tried the following example:
on (release) {stopAllSounds();
daveNight.stop();
stop();
[code].......
View 9 Replies
Jun 1, 2011
I want to play the movie in the timeline, so i dont have to export the file every time i want to see the movie clip.
This is a school prosject so please respond quickly.
View 1 Replies
Sep 12, 2011
[Code]....
My only issue now is that although the SWF plays when I test the movie, it doesn't play directly on the stage when I press the timeline's Play button. Is there a way I can get the SWF to play using the Play button? I'd prefer to see the SWF so I can add overlays.
View 7 Replies
Oct 30, 2011
I have limited Flash experience in CS 3 and 4 but I got CS 5 and built an animated movie symbol and I tried everything I could think of but it would not play in the main timeline.To sum it up the animations and tweens work in the symbol but they do not appear in the main timeline.
View 1 Replies
Jan 31, 2011
I remember in an older version of flash you could put a gotoAndPlay statement in the last frame of a sequence telling it to go back to the first frame in a sequence, but as I understand it you are not supposed to put script into frames anymore. So is there a way to tell a movie clip to play and repeat just part of its timeline (say a walking sequence) and then have it change to a different sequence later (such as jumping)?ed.
View 1 Replies
Jan 29, 2005
Short description what I wan'a do: 30 frame long movie clip (my_mc) and a button (button_btn). When button rollOvers the clip should play (how to do that I know ) and when on button RollOut the clip should play backwards from the same frame where it stopped.
View 1 Replies
Jun 11, 2005
Two questions to which I cannot find the answers:
(1) I would like to be able to "grab" the current frame (as an integer) that the timeline is currently playing as the SWF plays and use it as a variable:Number. Is this possible? Alternately, it could be how many (milli)seconds the swf is into at a given point during playback. Is this possible? I'm trying to create a scrubbable SWF based on current frame that playhead is on relative to frame(1) and frame(last).
(2) Is it possible to have a timeline play in reverse? Example: swf plays until frame 25 where it is told to stop();, then depending on a condition, it either play();'s on to the next stop(); action or playReverse();'s (I know that this doesn't exist) back to the beginning of the SWF at the document's frame rate.
View 1 Replies
Nov 16, 2002
I'm not sure if this is possible or not, but could you use an AS to play the timeline backwards? Or play a MC backwards?
View 7 Replies
Jun 10, 2009
Okay, so I've got a happy little movie that shows an atom diagram. Every seven frames shows an electron popping up in the ring around the nucleus. This is all contained in a movie clip. I want a button that when pressed, tells the movie clip with the atom to advance the seven frames ( making an electron pop up ) and then stop. The same button if pressed again, will advance the movie clip an additional seven frames ( thus adding another electron ).
I've looked around quite a bit but haven't found a solution that will work for me. Also, I am working in AS2. (if you're feeling especially helpful, do you also know how to do the same but in reverse? I've found how to play movie clips in reverse, but not for a certain frame interval.)
View 1 Replies
Sep 23, 2009
direct me to a simple technote on how to play the timeline with a simple buttonexample:in AS2 you could attached script to button something like
on MouseEvent {
gotoandplay(6);
}
[code].....
View 4 Replies
