Is it possible to create one or several instances of a movieclip from the library with variable names
my1_mc
my2 _mc
.........
my5_mc
so that I can make a function that will use the name of any of these movieclips.
i made a custom class where i would like to create x instances of a movieclip. But the following doesn't work:
[Code]...
I keep getting the error: Scene 1, Layer 'Layer 1', Frame 1, Line 5 1119: Access of possibly undefined property Collector through a reference with static type CustomClass.
Is there a way to group a bunch of movie clip instances into a single variable? Reason is, I have a lot of movie clips acting as buttons that I have added to event listeners. All of the movie clips with do the same functions and I have a few different functions created.
For example. How can I change this
Code:
mc_aitkin.addEventListener(Event.CHANGE, changeAlpha);
mc_anoka.addEventListener(Event.COMPLETE, changeAlpha);
mc_aitkin.addEventListener(MouseEvent.MOUSE_OVER,hoverOver);
mc_anoka.addEventListener(MouseEvent.MOUSE_OVER,hoverOver);
[Code].....
I have a number of loader instances (loader1, loader2, loader) which I will use to load pictures. I tried to create a loop and run the command
for(var st=1,st<4,st++) {
_root.movie_clip.loader+st.load("picture.jpg");
}
The concatenation "loader+st" doesn't seem to work. Is it not supported in AS2.0?
i have sprites in the library with linkages in them.. how would i create new instances of them if they are stored inside an array?
[Code]...
I'm currently working on an advanced preloader and i'm creating loads of different variables etc. based on the percentage loaded. I need the variables to be named Number + percentage, so in the end I will have Number1, Number2, Number3, Number4 etc. How can I create variable names using my percentage variable? Can't seem to find anything that answers my question.
View 2 RepliesI am creating multiple bitmaps within a loop, and placing them inside their own MovieClip. I then have another MovieClip in the Library which I am calling and putting inside the MovieClip generated for the bitmap. Alas I cannot get multiple instances to work of the MovieClip from the Library. I think it must be my syntax in the following code..
Code:
for(i=0;i<10;i++){
this['bmp'+i] = new BitmapData(etc,etc)
this['box'+i] = new Bitmap( this['bmp'+i] );
[Code]....
Basically, I have made a new FLA file, and in it's library I have created two symbols. Both symbols have their own class .as file.The first symbol is a movie called GridBox, and it's class has a package that uses lines to draw a shape, namely, a diagonal box tile.The second symbol is a movie called MainGrid, and it has a class that loads the movie GridBox from the library, in to its self.All my code works fine, the thing is, I would like to load more than one instance of the same movie clip, at a series of different locations, and im lost.Here is the code:
Actionscript Code:
package { import flash.display.MovieClip; public class MainGrid extends MovieClip private var myMovieClip:MovieClip;
[code].....
the idea is to create a loop to that displays 16 cards face down in two rows and eight columns using either a "for" loop or "while" loop, execute 16 times once for each clip.use new to dynamically create card instances based on the Movie Clip symbol in the library.use a modulo operator to operate the x position of each clip use Math.floor to operate the y position of each clip set dynamic text value of the card clip to show appropriate card number add card to the display list if using the iteration variable ("while" loop).this is what i am using and i get one card (the stack of 16) in the bottom left hand corner with a 16 trace statements of "instance 2"
//create variable for number of columns
var numberOfColumns=8;
// requirement 1
[code]....
i need to dynamically create arrays with variable array names.
for example, something like this:
for (var n=0 ; n < nodeContainer.length ; n++) {
nodeObj = nodeContainer[n];
var name:String = nodeObj.nodeID;
[Code]....
I need to make a loop that can create (and use) incremented variable names. Basically I need to dynamically create a certain number of sprites and datagrids then I need to add these dynamically created datagrids and sprites to the stage. So the static code (which works, but I think is NOT the right way to go) would look something like this (I'm leaving out a bunch of stuff but this should give you the right idea):
[Code]....
But I can't figure out the syntax and how to make it work... This MUST be possible! My knowledge is pretty thin in actionscript,
I'm trying to create a simple ripple effect made of circles created using the drawCircle() method. Afterwards I animate the circle by changing it's size and alpha value. The final radius of the circle and the position is random.
How do I create multiple circles/ripples?[code]...
The movie I'm creating will have many movie clips on each frame and each will have a mouseover tooltip.I have the code set so that I can mouseover a defined movie clip and I properly get the tooltip.[code]This works, where n1 is the instanced name of the movie clip.What I want is to be able to define a variable "whichNav" that will dynamically change to a movie clip instanced name when I mouse over that movie clip, then I can replace "n1" in the above code with "whichNav" and not have to remake the above code for every movie clip in the frame.For example, I could have movie clips instanced as n1, n2, n3, n4... ect. I want a variable that will track which movie clip I have my mouse over, and input that variable into the above code to create the tool tip for each movie clip.
View 3 RepliesI wanted to do something like:
ActionScript Code:
arrayTucano = (tucano1, tucano2, tucano3); // movieclips instances
// Function to drag
[Code]....
But it drags only the last movieclip, tucano3.
Why? How could I make to drag all of them?
I'm modifying a flash slideshow (actually the one from kirupa.com) and among other things, I'm trying to get it to generate small LEDs depending on the number of images the script finds in the xml file. I intend to make them light up depending on the image currently up (i.e. image #5 lights up led #5) and allow users to click on the LEDs to jump around between images.
The problem I'm having now is that I can't get the file to generate more than one LED at a time. In fact, it seems to only generate the last LED needed and places it in the final LED position. My only real guess at this point is either I'm not indicating a new depth properly, or I'm creating the new movieclip over and over again but not actually creating a duplicate of it, or something like that.[code]...
I started a thread about a reference to a symbol House, in the output window, which was: House_1. A lot of people said some useful things about that. All day I've been thinking about it, and I came to the conclusion that I don't understand things, at a very basic level.
Consider:I make a movieclip which I give the Symbol name Drawer. (I don't export it for AcitonScript.)On the stage I manually place two instances of this Symbol. The first one I give the Instance Name drawer (in the properties panel). The second one I leave nameless.Now if I trace the names of both these clips, by
trace(this.getChildAt(0).name);
trace(this.getChildAt(1).name);
the output window gives me
drawer
instance2
Now I know that the so-called "instance name" which I gave in the Properties Panel (drawer) is, in reality, a variable name which Flash gives my first instance behind the scenes. And instance2 is a name that Flash gives my second instance. What exactly the nature of that name is, I do not know.My point is: both names (drawer and instance2) are the .name property of these movieclips. Otherwise I could not have traced them through asking for the .name property, in the above. Yet only the first of these two can be manipulated:
drawer.x can be set;
instance2.x can (as we know) not be set.
But...why? What is the real difference between these two kinds of names? How can they both be the .name property of their underlying movieclip, yet be of such a different nature? What IS the nature of the instance2 name? If it's a String, how come the .name property of one movieclip can be a variable name, while the .name property of another (but identical) movieclip is a String?
I've searched every bit of web page on the net I could find. But it looks as if nobody addresses this issue. We all just work with it - but it makes no bloody sense. A name property = a name property, you'd think. Whether Flash set it or I set it should not make a difference. The x property of a clip, for example, does not change in nature according to who set it - me or Flash.So, again, just to emphasize the problem: how can a property (the name property) of a movieclip change in NATURE depending on who set it? After it's been set, shouldn't the name property of a clip be of exactly the same nature as the name property of another clip?
I am currently trying to create a piece of code that will retrieve values from a 2D array and use them as x and y values to position instances of a MovieClip called mcMain. The code for the array will look something like this...
Code:
var lvlMain:Array = new Array();
lvlMain.push(new Array());
var xAxis:Array = new Array([150,400,200,300,100]);
[Code]....
how to create a piece of code that would retrieve the x and y coordinates listed in the arrays and use them to create instances of mcMain. So going from the code above it would create the first instance at x=150 and y=100, second instance........fifth instance at x=100 and y=500.
In my fla file, I created a movieclip in library which links to class MyMovieClip. I add some functions in the class. I fla file, when I drag the movieclip to stage, all the functions are working well. But I want to dynamic create the movieclip in stage(not dragging from library). This is the codes in my first frame of fla:
var tf:MovieClip= new MyMovieClip();
addChild(tf);
but all the time it display those error information: TypeError: Error #1009: Cannot access a property or method of a null object reference.
at MyMovieClip()
at dragExample_fla::MainTimeline/frame1()
anybody can tell me what the problem is and how to dynamically create a movieclip which link to a class.
I create a dot as a movieclip in the library. also i set the linkage to Dot class. Is it OK to create an external class Dot to associate with the movieclp inside the library? if it's ok. I would like to ask that is there any wrong in my code?
Code:
package {
import flash.display.MovieClip;
import flash.events.Event;
public class Dot extends MovieClip {
[Code]....
I'm trying to write code that will dynamically add a falling leaf to a tree sprite every so-odd frames. But try as I might, I can't get the little retard to appear.[code]...
View 8 RepliesI want to load multiple players in my solution.Is there any problem if they have same data model with different instances names?
View 1 RepliesI've continued with it and have hit another hurdle. When I run the loop to load in the XML images, inside the same loop I add instances of a "thumb" movieclip onto the stage. It's just a little graphic that I want to use as thumbnail buttons. So for example, if the XML loads in 3 images, 3 instances of the "thumb" mc also load onto the stage. I currently give then unique names in the loop but that name gets overwritten each time the loop runs. How can I record each name of the instance? I'm guessing an array but how do you populate an array with a loop?
Then, I'm hoping if those names are recorded in an array, then I can reference the different thumb instances (so they can do different things with the images) and also use removeChild on them when I close the gallery and load in the next gallery. Here is my code so far,
[Code]....
where each of my buttons have a dynamic text label.
So this button is a symbol, and the instances are named let say btn1, btn2, btn3. The label tag name inside the symbol is btnName.
How I can make this work if I define my array on top level? How I can make sure that the label btnName will have the correct array name for each btn instances?
found out the benefits of .children usage...
btn1.children.btnName = xArray[0];
btn2.children.btnName = xArray[1];
...
I create X instances of a class (called SM) depending on a varibale I have (called here howmany), but later on as I want to check their states with a while, I need to have diferent instances names (sm1,sm2,sm3...).[code]
View 1 RepliesI have the following code below which creates two movie clips on the stage dynamically. How would I give the two movie clips different instance names, so I can add separate event listeners to them?
ActionScript Code:
for (var i:uint = 0; i < 2; i++) {
var my_box:Box = new Box();
[code].....
I want to add MovieClips from the library at runtime onEnterFrame to create a trail behind the movieClip that is moving on stage:
[Code]...
This just creates one instance of a movieClip "Follower". But how to make trail like effect - adding movieClips onEnter frame and positioning them according to "mcToFollow"?
I'm creating a mask effect. i create 10 movieclip with a library class reference that appear on the screen with a random alpha effect. THe problem is that if i try the effect alone all works ok. if i mask the layer that contains the effect on an image i don't see the effect. i see directly the image masked with the boxes. i can't explain that because i've the effect first but it seems that when i test the movie the effect doesn't play and the boxes appear directly on the screen.
View 5 RepliesI'm still learning flash and actionscript 3 and i am having trouble with variable and object names. I need to be able to combine variable names together (in the same way as php can combine by doing var1.var2).
My swf contains 4 loaders (image1_loader, image2_loader etc..) which are a child of (image1_content, image2_content etc.....)
I then have 4 buttons which load an image into the loader and while doing so they define the currently active loader.
Finally i have 4 control buttons - scale up/down and rotate clockwise/anticlockwise which should only control the currently active loader (as set by the buttons above)[code]...
I'm still learning flash and actionscript 3 and i am having trouble with variable and object names. I need to be able to combine variable names together (in the same way as php can combine by doing var1.var2).
My swf contains 4 loaders (image1_loader, image2_loader etc..) which are a child of (image1_content, image2_content etc.....)
I then have 4 buttons which load an image into the loader and while doing so they define the currently active loader.
Finally i have 4 control buttons - scale up/down and rotate clockwise/anticlockwise which should only control the currently active loader (as set by the buttons above)
So my buttons as well as loading the image have the event listener:
image1_btn.addEventListener(MouseEvent.CLICK, setCurrentSelection);
image2_btn.addEventListener(MouseEvent.CLICK, setCurrentSelection);
(and so on..)
function setCurrentSelection(e:MouseEvent):void {
[Code]...
So within the rotateClockwise and rotateAntiClockwise functions i need to be able to recognise which is the currently active loader and have that number instead of the X - so if it is image1_loader - it needs to be image1_content, if 4 - image4_content... I had tried to do it as this but it doesn't like it being a string:
rotateAroundCenter((activeLoader+'_content'), 10, ptR);
I'm still learning flash and actionscript 3 and i am having trouble with variable and object names. I need to be able to combine variable names together (in the same way as php can combine by doing var1.var2).My swf contains 4 loaders (image1_loader, image2_loader etc..) which are a child of (image1_content, image2_content etc.)I then have 4 buttons which load an image into the loader and while doing so they define the currently active loader.Finally i have 4 control buttons - scale up/down and rotate clockwise/anticlockwise which should only control the currently active loader (as set by the buttons above)So my buttons as well as loading the image have the event listener:[code]So within the rotateClockwise and rotate Anti Clockwise functions i need to be able to recognise which is the currently active loader and have that number instead of the X - so if it is image1_ loader - it needs to be image1_content, if 4 - image4_content.I had tried to do it as this but it doesn't like it being a string:[code]
View 3 Replies
