Below is a very simple button code.
[Code]...
And in the attachment you will see the fruits of this haaard work. My question: Is there a (simple and clean) way to "lock" the button for a few seconds when it has been pressed? Press the big grey ..thing in the attachment swf file multiple times for one of the many reasons~
I have used the tutorial for Hover captions found here:[URL].. and I have searched the forum but can't find an answer to my specific question.
I'd like to have the caption appear after the user hovers for 2 or 3 seconds----rather than immediately.
I have been told to use setTimeout for this but am not sure how to do that.
In Actionscript 3 I see that if I press the "8" key (from the numpad) I got the result of keyCode of the numpad key "8", but when I disable the "Num Lock" and press the numpad key "8", the event I receive the keyCode of the Up Arrow key...
How to difference between the keys of the numpad (with Num Lock disabled) and the original keys, such as the Arrows, End, Insert, Delete and so on?
I've tried using the keyLocation property of the event, the value of that property is 0 for the arrows and 3 for the numpad, but when the Num Lock is disabled the value for the 4, 6, 2 and 8 in the numpad are 0, so I can't difference between the numbers with numpad disabled and the Arrow keys.
Also the numLock property of the Keyboard class didn't work, because I can't know if I press the Up Arrow or the 8 whit Num Lock disabled (because they trigger the same event, or I think that)
What I have is a series of buttons created via attachmovie based on XML nodes. I want to make sure all buttons are all clicked. What I have below is the onRelease of the button and I need to put my checkDone function in there because of the XML onLoad function. What I am struggling with is how to check if each has been clicked. Typically I would just do like but1==true but that does not seem to work.
_root["but"+b].onRelease = function() {
function checkDone(whichbut) {
done = true;
[code]....
I have 2 main movie clips, one for the menu bar and one for the content, there is then a movie clip within each one of those, one to hold the set of buttons, and one to hold the content movie clips. The menu bar has a control to flip between 2 sets of buttons. the viva content button works fine to begin with, but after the menu bar control is clicked, the content buttons stops working. Code is as Follows: All of the code (bar a few stop() flags on cirtain frames) is located on frame 1 of the root, which is the only frame on the root.
barControl.barContent.barUp.addEventListener(Mouse Event.CLICK, menuSwitchHandle); barControl.barContent.barDown.addEventListener(Mou seEvent.CLICK, menuSwitchHandle); barControl.barContent.barMenu.vivaBtn.addEventList ener(MouseEvent.CLICK, vivaHandle);
[code]........
Buttons in flex can be pressed with the space key, but a client would like to press enter instead of space. This can be achieved by programming each button, but it would be very time consuming. How to do this in the less amount of time?
View 1 RepliesI have 2 main movie clips, one for the menu bar and one for the content, there is then a movie clip within each one of those, one to hold the set of buttons, and one to hold the content movie clips.
The menu bar has a control to flip between 2 sets of buttons.
the viva content button works fine to begin with, but after the menu bar control is clicked, the content buttons stops working.
Code is as Follows:
All of the code (bar a few stop() flags on cirtain frames) is located on frame 1 of the root, which is the only frame on the root.
barControl.barContent.barUp.addEventListener(Mouse Event.CLICK, menuSwitchHandle);
barControl.barContent.barDown.addEventListener(Mou seEvent.CLICK, menuSwitchHandle);
[Code]....
my fla file will be attached below. (its not the greatest looking thing but i just need to understand how to do what i want it to). i've got a navigation menu at the bottom of my stage with 2 movieclips. each movieclip has an instance of a button inside, a motion tween of a _alpha graphic flying in, and text to distinguish each button.
my problem #1: on the stage when you hit 'home', it'll fly in, but when you hit 'schedules' next, that will fly in too, right over anything i would have placed on 'home'. i'd like to prevent that by maybe having an outro animation (like a reverse of the intro animation) that can check whether another button was pressed before playing & when its completely off the stage, to play the next content corresponding to the button pressed.
my problem #2: i dont like how everytime when on the stage, i press the 'home' button or 'schedules' button multiple times, that they keep replaying the animation. i'd like it to know that its already been pressed & doesnt need to play again. i have a feeling this problem might be an easier one to figure out but i'm drawing a blank with it.
I have a navigation that contains approx 8 movieclips that are actually acting as buttons but I'm having trouble getting them to work.I am currently testing 2 buttons/mcs at the moment. Which are named and have the script on the actions layer. The problem is, that when either button is pressed, it is registering both buttons as being pressed.[code]
View 3 RepliesI�v build a simple flash projector to offer to my local fire department Essentially they used to in internal audio alarms to warn firefighters when there is an accident, fire, aggression, etcIn the version 1.0 they click several buttons, one to play the alarm sound, otherto announce the vehicle or vehicles that goes out, and a last one that says what is occurring.
The problem they report is that the sounds play immediately when you click in each of the buttons, and even the sound overlaps the other, which makes they click on each button and have to wait for the sound to finish and then click next. All this is normal because I associated the sounds to the buttons. What do I need to do the flash in this order in the version 2 of my projector:
1 The Fireman choose the type of alarm you want to play and click the button corresponding (but do not want the sound to play now) let's imagine that he pressed the button "alarm 1"
2 The Fireman choose (s) vehicles which are going out to the occurrence (but do not want the sound to play now) let's imagine that pressed the button "ABSC01"
3 The Fireman choose the type of occurrence (but do not want the sound to play now) we will imagine that pressed the button "fire"
4 finally the fireman holding down the "PLAY" (the green on on the top of the image) and this Makes the sounds selected to start playing in sequence, liker "Alarm 1" then "ABSC01 "and then" Fire "
Logically speaking I believe that each button must declare a variable associated with every unique sound, and then pressing the button takes the variables and plays them in sequence and without overlapping sounds.
I am developing a game with a large amount of code. The unfinished version of the game can be found here[url]...
There are two Key Listeners. One listens for SPACEBAR for the big jump, the other listens for CTRL for the small jump. The problem I am experiencing is that when the two buttons are pressed precisely the same time, both jump actions occur, resulting in a super big jump. (A combination of the two jump heights.)[code]...
I quite often have to create portfolio sites which have a list of projects on the lefthand side. When each project is clicked the relevent content is loaded into the main screen. I'm now moving towards creating such sites where the menu content is XML driven.
What I want to know is, what is the BEST way to do the old radio button style thing where the clicked button changes state (eg. colour) and the when another button is clicked, it returns to it's up state.
I've done this before, when I've created the buttons manually, by creating a 'clicked' variable that can either be true or false for each button, the value of which is changed when a button is clicked. The problem with this (I think) is that it relies upon me knowing how many buttons I have, and if this is driven by XML that is going to get messy.
What I'm after is a very simple, self contained method of setting a button's state when it is clicked (no problem), but then 'unclicks' when any other button in the menu is pressed.
I have created two scroll buttons for my dynamic text field, following this guideMy problem is, that you have to click the buttons many times to scroll down to the end.How do you make it possible to "Press and hold" the mousebutton instead?My code is as follows:TextField name: scrollableTextButton Up Code:
Code:
on (press, release, keyPress "<Up>") {
currentScroll = scrollableText.scroll;
[code].....
lets say i have a bunch of buttons and all the code i need is in the onRelease functions and the exact effect i wanted would be clicking the buttons every 5 seconds.
Basically what i want to do is use those onRelease functions on the buttons, in the button order(button1, button2, etc.) every 5 seconds, without clicking though. Is there a way i can tell it to use the onRelease functions? How would i go about setting this up?
Everything works perfectly i just want it to "auto-click" or "auto-call the onRelease's" every 5 seconds. It would also be nice to be able to click the buttons at any given time too. So say the timer is on button4 and i click button2 and the timer starts from there.
Code:
myInterval = setInterval("button[i] onRelease function here", 5000);
I have a circle movieclip that needs to rotate to certain destinations depending on buttons pressed in the navigation. Everything works fine, except when you go from green to cyan and vice versa, it does a full 360 rotation instead of just moving to the destination.
View 13 RepliesWhat i need is a series of pictures on a row that is mouse sensitive, if you move the mouse the gallery move in a loop, (no stop!)[code]This works but i would like to have unblur the last button pressed.I did some tries but i'm not a good programmer...URL...
View 3 RepliesSo i'm making this site where there are bottles floating in the ocean that are nested buttons so i can have them sway as well as have a mask on the bottoms.When u click a button all bottles should move to the left side and eventually the content will appear.I've added a trace for debugging purposes ... for some reason the buttons only work a few times.[code]
View 4 RepliesI am making a simple radio interface and i have 6 preset buttons which i want to have play the specific preset button's song which is in the library and stop/pause the current song when any preset button is pressed.
i tried using the attachSound function, with associated identifiers but not sure if that is the right way to go. It plays the songs, but doesnt stop them.[code]...
I'll explain the problem I have having as Im sure there are a few solutions, I have a flash website which has four main links, HOME, SERVICES, BLOG, CONTACT.
When the services button is pressed 5 more buttons come in from the right hand side each is slightly delayed to give a stacking effect.
The problem is if the user clicks on the Services button and then quickly presses the another button the service buttons tween in onto the wrong page!
The solution I am thinking is to set a time delay on the services button so when it is pressed the other buttons are delayed for a few seconds to give time for all teh serivecs buttons to tween in.
If so how could I implement it? I have bene trying many things to get it to work, I almost have it, but the delay only works the first time the button is pressed and I cant seem to get the timer to reset!
I'm developing a game, here is a screenshot:I have a function in my main loop called moveShip that moves the player's ship if some buttons are pressed. The trouble is, some commands began to break it recently, such as removeChild(debriefingScreen), and I have no idea why. Also, firing (spawning bullet movie clips) restores the moveShip functionality 0_
View 2 RepliesI have a function on root:
_root.fadeBox_mc.onEnterFrame = function (){
if (fade){
this.nextFrame();[code]....
This causes a mc to fade in and out on rollover/rollout. But what I wanna make is a box that fades in when pressed on the button and fade out when pressed for the second time. But if I say
on (press){
_root.fade = true;
}
the mc fades in, but I cant do another on (press) to fade out. Is this too confusing?
I have a loop and in it i am attaching a movie clip (basiccly its just a row with data). The movieclip has a alpha fade in it. Now I want to delay each attachmovie function so that the movies are attached one by one rather then trow them all on the screen at once. (plus it looks better with the alpha fade).
I tried the setInterval but it wont work (ex.:Interval is 1 sec, and if im going to attach 6 MC, flash wait 6 * 1 sec, then show them all)
And is it possible to attach a movieclip inside a othermovieclip thats not on the same frame (the other MC is on frame 10)?
I'm trying to create something that you could use in a game that shows you the points adding to your total score little by little (instead of it adding it all at once). I've managed to make a timer delay, but it will still only update once and I don't know what to do.
Code:
var pointBuffer:Number = 500;
var totalPoints:Number = 1000;
[code]....
I have been searching the internet for help on how to delay code within a single function, but every solution I have found so far relies on creating event listeners for a timer and then running commands from the event handler functions.I am writing a 'console' type interface where the user types in a string which is, upon pressing enter, processed in one function and then sent to a final function to display the result.[code]I want to somehow insert a pause between each call of that last function, updateDisplay.
View 1 RepliesI have a situation that is driving me nutsthe site in question lives hereI have that 16 sec tweenLite intro fading up the title, then down, then all the elements of the stage fade in.which is fine and looks great.BUT the video that plays after the intro will sometimes play before intro is done which is not great.I have done the code all in the timeline as I am not class savvy is there any way that I can pause the video instance or have the playhead pause until the intro is over.
View 0 Repliesi was wondering if you can delay whats inside a text box... for example, when an action is made, the text box will show "action done". kinda like a status bar, now what i wud wanna do is for the x number of seconds i wud want to set it back to blank text box again...
View 7 RepliesI'm making an image gallery that has an MC as a background that resizes itself due to the size of the image. How can I use the loadMovie function when the button is pressed it will resize the background to the size THEN display the loaderMC that will load the image.How can I achieve this effect? I'm wanting to use the reusable MC (from Kirupa tutorials) or something that will load the image and show a status bar for the loading.
View 2 Repliesi have 5 moviecip in the stage and i am scaling them to 100% i would like to delay each one so let say first one animate when reach 50% the next movieclip start growing an so on ...
[CODE]....
i was wondering if you can delay whats inside a text box... for example, when an action is made, the text box will show "action done". kinda like a status bar, now what i wud wanna do is for the x number of seconds i wud want to set it back to blank text box again... is there any way to do that?
View 7 RepliesI'd like to delay the handling for some captured events in ActionScript until a certain time. Right now, I stick them in an Array when captured and go through it when needed, but this seems inefficient.
View 2 Replies