ActionScript 2.0 :: MX Function To See If Buttons Pressed?
Mar 9, 2009
What I have is a series of buttons created via attachmovie based on XML nodes. I want to make sure all buttons are all clicked. What I have below is the onRelease of the button and I need to put my checkDone function in there because of the XML onLoad function. What I am struggling with is how to check if each has been clicked. Typically I would just do like but1==true but that does not seem to work.
_root["but"+b].onRelease = function() {
function checkDone(whichbut) {
done = true;
[code]....
View 2 Replies
Similar Posts:
Aug 1, 2010
I'm developing a game, here is a screenshot:I have a function in my main loop called moveShip that moves the player's ship if some buttons are pressed. The trouble is, some commands began to break it recently, such as removeChild(debriefingScreen), and I have no idea why. Also, firing (spawning bullet movie clips) restores the moveShip functionality 0_
View 2 Replies
Oct 29, 2009
I have 2 main movie clips, one for the menu bar and one for the content, there is then a movie clip within each one of those, one to hold the set of buttons, and one to hold the content movie clips. The menu bar has a control to flip between 2 sets of buttons. the viva content button works fine to begin with, but after the menu bar control is clicked, the content buttons stops working. Code is as Follows: All of the code (bar a few stop() flags on cirtain frames) is located on frame 1 of the root, which is the only frame on the root.
barControl.barContent.barUp.addEventListener(Mouse Event.CLICK, menuSwitchHandle); barControl.barContent.barDown.addEventListener(Mou seEvent.CLICK, menuSwitchHandle); barControl.barContent.barMenu.vivaBtn.addEventList ener(MouseEvent.CLICK, vivaHandle);
[code]........
View 3 Replies
Apr 23, 2010
Buttons in flex can be pressed with the space key, but a client would like to press enter instead of space. This can be achieved by programming each button, but it would be very time consuming. How to do this in the less amount of time?
View 1 Replies
Oct 29, 2009
I have 2 main movie clips, one for the menu bar and one for the content, there is then a movie clip within each one of those, one to hold the set of buttons, and one to hold the content movie clips.
The menu bar has a control to flip between 2 sets of buttons.
the viva content button works fine to begin with, but after the menu bar control is clicked, the content buttons stops working.
Code is as Follows:
All of the code (bar a few stop() flags on cirtain frames) is located on frame 1 of the root, which is the only frame on the root.
barControl.barContent.barUp.addEventListener(Mouse Event.CLICK, menuSwitchHandle);
barControl.barContent.barDown.addEventListener(Mou seEvent.CLICK, menuSwitchHandle);
[Code]....
View 1 Replies
Mar 31, 2005
my fla file will be attached below. (its not the greatest looking thing but i just need to understand how to do what i want it to). i've got a navigation menu at the bottom of my stage with 2 movieclips. each movieclip has an instance of a button inside, a motion tween of a _alpha graphic flying in, and text to distinguish each button.
my problem #1: on the stage when you hit 'home', it'll fly in, but when you hit 'schedules' next, that will fly in too, right over anything i would have placed on 'home'. i'd like to prevent that by maybe having an outro animation (like a reverse of the intro animation) that can check whether another button was pressed before playing & when its completely off the stage, to play the next content corresponding to the button pressed.
my problem #2: i dont like how everytime when on the stage, i press the 'home' button or 'schedules' button multiple times, that they keep replaying the animation. i'd like it to know that its already been pressed & doesnt need to play again. i have a feeling this problem might be an easier one to figure out but i'm drawing a blank with it.
View 5 Replies
Mar 26, 2009
I have a navigation that contains approx 8 movieclips that are actually acting as buttons but I'm having trouble getting them to work.I am currently testing 2 buttons/mcs at the moment. Which are named and have the script on the actions layer. The problem is, that when either button is pressed, it is registering both buttons as being pressed.[code]
View 3 Replies
Jun 12, 2010
I�v build a simple flash projector to offer to my local fire department Essentially they used to in internal audio alarms to warn firefighters when there is an accident, fire, aggression, etcIn the version 1.0 they click several buttons, one to play the alarm sound, otherto announce the vehicle or vehicles that goes out, and a last one that says what is occurring.
The problem they report is that the sounds play immediately when you click in each of the buttons, and even the sound overlaps the other, which makes they click on each button and have to wait for the sound to finish and then click next. All this is normal because I associated the sounds to the buttons. What do I need to do the flash in this order in the version 2 of my projector:
1 The Fireman choose the type of alarm you want to play and click the button corresponding (but do not want the sound to play now) let's imagine that he pressed the button "alarm 1"
2 The Fireman choose (s) vehicles which are going out to the occurrence (but do not want the sound to play now) let's imagine that pressed the button "ABSC01"
3 The Fireman choose the type of occurrence (but do not want the sound to play now) we will imagine that pressed the button "fire"
4 finally the fireman holding down the "PLAY" (the green on on the top of the image) and this Makes the sounds selected to start playing in sequence, liker "Alarm 1" then "ABSC01 "and then" Fire "
Logically speaking I believe that each button must declare a variable associated with every unique sound, and then pressing the button takes the variables and plays them in sequence and without overlapping sounds.
View 1 Replies
Mar 28, 2012
I am developing a game with a large amount of code. The unfinished version of the game can be found here[url]...
There are two Key Listeners. One listens for SPACEBAR for the big jump, the other listens for CTRL for the small jump. The problem I am experiencing is that when the two buttons are pressed precisely the same time, both jump actions occur, resulting in a super big jump. (A combination of the two jump heights.)[code]...
View 2 Replies
Mar 22, 2007
I quite often have to create portfolio sites which have a list of projects on the lefthand side. When each project is clicked the relevent content is loaded into the main screen. I'm now moving towards creating such sites where the menu content is XML driven.
What I want to know is, what is the BEST way to do the old radio button style thing where the clicked button changes state (eg. colour) and the when another button is clicked, it returns to it's up state.
I've done this before, when I've created the buttons manually, by creating a 'clicked' variable that can either be true or false for each button, the value of which is changed when a button is clicked. The problem with this (I think) is that it relies upon me knowing how many buttons I have, and if this is driven by XML that is going to get messy.
What I'm after is a very simple, self contained method of setting a button's state when it is clicked (no problem), but then 'unclicks' when any other button in the menu is pressed.
View 6 Replies
Aug 5, 2009
I have created two scroll buttons for my dynamic text field, following this guideMy problem is, that you have to click the buttons many times to scroll down to the end.How do you make it possible to "Press and hold" the mousebutton instead?My code is as follows:TextField name: scrollableTextButton Up Code:
Code:
on (press, release, keyPress "<Up>") {
currentScroll = scrollableText.scroll;
[code].....
View 4 Replies
Mar 25, 2007
I have a circle movieclip that needs to rotate to certain destinations depending on buttons pressed in the navigation. Everything works fine, except when you go from green to cyan and vice versa, it does a full 360 rotation instead of just moving to the destination.
View 13 Replies
Jul 22, 2010
What i need is a series of pictures on a row that is mouse sensitive, if you move the mouse the gallery move in a loop, (no stop!)[code]This works but i would like to have unblur the last button pressed.I did some tries but i'm not a good programmer...URL...
View 3 Replies
Jun 12, 2010
I am making a simple radio interface and i have 6 preset buttons which i want to have play the specific preset button's song which is in the library and stop/pause the current song when any preset button is pressed.
i tried using the attachSound function, with associated identifiers but not sure if that is the right way to go. It plays the songs, but doesnt stop them.[code]...
View 12 Replies
Mar 17, 2011
I have a function with the name "result". It's two textfields where you can input some data. I have an addEventListener with a mouse Click to that function. So when I click on my button It starts the function. But I want to call the same function when you press the enter key. So the result will be the same no matter if you click on the button or just press the enter key. This is what I have tried but It doesn't work. I guess I should write my function name "result" somewhere.
this.stage.addEventListener(KeyboardEvent.KEY_DOWN, enterfunc);
function enterfunc(event : KeyboardEvent) : void{
if (event.keyCode == Keyboard.ENTER){
submit();
}}
View 7 Replies
Apr 24, 2011
I have a character where if I press left/right/up/down he plays the associated animation, however, if I hold left, and then tap another key (whilst still holding the left key) the animation stops, even though the left key is still being pressed.
Here is my code:
ActionScript Code:
//====================================================================================================//
//===================//
//ANIMATION FUNCTIONS//
[code]....
View 4 Replies
Jan 29, 2008
how to create this kind of fullscreen function when button is pressed http:[url].... . i dont know what kind of method used in this site.., if it uses javascript or just actionscript.
View 5 Replies
Feb 16, 2009
I have one function that runs when a certain button is pressed. However, I want this function to also run when enter is pressed. I know that I can make a function to do this alone, but is there any way that I can make the function that I already have made (that is set to run when the button is pressed) to run also when enter is pressed?
View 3 Replies
Jan 4, 2009
I have a very basic question. I have a custom class called caurina. I've imported the class and it works great. What i did is use that as a function called slide().
What I would like to do is make that function play when a button is pressed. I can't seem to find out how to do this anywhere. I am using as3.
Summary: When btn is pressed go play function slide()
View 6 Replies
May 13, 2009
I am creating a driving game using the following method to drive the car forward: if (Key.isDown(Key.UP)) {speed += 1;} I also want to call a function when the key is pressed athough if I add a function call the function gets repeated as long as the key is pressed and I only require it to run once?
View 1 Replies
Nov 11, 2005
In the following code I am trying to call the function pressMc when movieclip myMC_mc is pressed and the apply the drag action to it. However the drag action is being applied to the whole of level0 and therefore all of the moviclips.I am not sure why. Am using the this key word as I would expect this to be identified as myMC_mc when the myMC_mc.onPress is evoked.I want to write this as a function because I want to apply this drag action to lots of different movieclips
function pressMc (){
delete this.oldX;
delete this.oldY;[code]....
View 5 Replies
Nov 16, 2004
I have a function on root:
_root.fadeBox_mc.onEnterFrame = function (){
if (fade){
this.nextFrame();[code]....
This causes a mc to fade in and out on rollover/rollout. But what I wanna make is a box that fades in when pressed on the button and fade out when pressed for the second time. But if I say
on (press){
_root.fade = true;
}
the mc fades in, but I cant do another on (press) to fade out. Is this too confusing?
View 2 Replies
Aug 12, 2009
i have an if statement, an object will go to a new frame if multiple buttons are pressed
PHP Code:[code].....
now i want it so that if one condition is met the mc will goto frame 2, if 2 conditions are met, frame 3 and if 3 conditions are met, frame 4.i know i could do this with a lot of if statements but i have a lot of movie clips to use this code on, so is there any way to write an if statement that will trigger different options if multiple conditions are met?
View 4 Replies
Feb 13, 2008
Below is a very simple button code.
[Code]...
And in the attachment you will see the fruits of this haaard work. My question: Is there a (simple and clean) way to "lock" the button for a few seconds when it has been pressed? Press the big grey ..thing in the attachment swf file multiple times for one of the many reasons~
View 1 Replies
Oct 11, 2003
I've got two movieclips, containing each two buttons. I was thinking about giving the buttons the following AS:
[Code]....
This won't work, because flash doesn't know which mc he has to move when "+" is pressed, but I still want this to work. It's weird, when you want to drag one, you always start dragging the lower one...
View 10 Replies
Jan 13, 2004
What would you use to create buttons which when pressed load an image in an image area within the same flash document?
View 1 Replies
Dec 6, 2010
I am struggling a bit with keys on the keyboards controlling a movieclip to happen.Ive got a person moving when pressing right and left, and a movieclip with three frames: First frame is a movieclip with the person standing still, looking bored. The second frame is the person moving right, and the third frame is the person moving left.This is the code that Ive inserted into the persons actions on scene1:
if (Key.isDown(Key.RIGHT)) {_x += speed;this.gotoAndStop(2);_xscale = +scale;}
if (Key.isDown(Key.LEFT)) {_x -= speed;this.gotoAndStop(3);_xscale = -scale;}
this code works alright accept that when the keys are not pressed it doesnt stand still, the legs are still moving, so I tried to include this code aswell:
if (!Key.isDown(KEY.RIGHT)) [code]....this makes the person standing still when not pressed but not moving the legs when turning right and left.
View 3 Replies
Apr 8, 2011
I'm making the transition from AS2 to AS3 and have some rollover and rollout code below. I'm looking to place an if statement into the onClipOver function that can trace what specific button is being pressed. In AS2 I would use the "this" command to see which movieclip was being used. how to properly write the IF statements using AS3 in the code below.
[Code]...
View 2 Replies
Sep 26, 2009
I have a function that executes when a button is pressed:
btnRandomAll.addEventListener(MouseEvent.CLICK, clickHandlerBtnRandomAll);
function clickHandlerBtnRandomAll(e:Event)
{
...but, I need it to also execute once, upon the file loading.
View 7 Replies
Nov 20, 2009
I am putting together a simple flash anim - and pretty much have about 25 buttons that I need to fade in and out on rollover. I seem to remember there is a way to apply the same function to all buttons - as long as the over and out state labels within the mc are the same.
View 8 Replies
