public function loadVideo_fun(videoFile) {
var my_nc:NetConnection = new NetConnection();
my_nc.connect(null);
var my_ns:NetStream = new NetStream(my_nc);
myVideo_video.attachVideo(my_ns);
my_ns.setBufferTime(5);
my_ns.play(videoFile);
}
the flv pause in the first frame cannot play
I am building a faq page with flvs for each of the 10 questions. But for some reason the flvs will not load dynamically (with Actionscript). When I load the source from AS and write play(); I can only hear the sound but no video.
The weird thing is that the flvs play ok when i specify the source in the component inspector and don't load them from the AS.
Even weirder, i tried replicating my project on a smaller version to show the problem, just with two buttons and two FLVPlaybacks and this time it worked. But will not work on my page! I am going nuts cause i dont know why it does that! I Mean it should work but it just doesnt![code]...
[Code]....
I'd like to play .flv dynamically, providing its path in action script. So, I've tryied something like this:
[Code]...
I have a movie, called box.swf that I'm loading into controller.swf.I have two buttons on the stage called pause_btn and play_btn that I'd like to use to control the timeline of box.swf.[code]
View 4 RepliesI have a dynamically loaded movieclip. Inside of that, I have a movieclip (with a menu in it) that I want to play when the user clicks a button. I can't seem to get it to work.
View 5 RepliesI am trying to play a video dynamically and make it clickable as like a link.[code]The Video player seems to appear and the video plays well too but there is a problem with the onClick Event which doesnt work no matter what i try. the click action never seems to work..what am i doing wrong here.
View 3 RepliesI have made a presentation with voice over, in which the images and audio files are loaded externelly from the folder where the swf was placed. the voice over files are in MP3 format, loaded with the script follows
mysound = new Sound();
mysound.loadSound("voice1.mp3");
mysound.start(0,0);
It works well in IE but not in Firefox.
I have made a presentation with voice over, in which the images and audio files are loaded externelly from the folder where the swf was placed. the voice over files are in MP3 format, loaded with the script follows
mysound = new Sound();
mysound.loadSound("voice1.mp3");
mysound.start(0,0);
[code]....
I have an application using the new sound capabilities in Flash Player 10 and I want to play a sound dynamically at a rate of 8KHz.
To play sound dynamically you need to listen for the sampleData event and then feed the sound object raw sound data. Unfortunately, the sampleData event appears to only be triggered to enable playback of sound sampled at 44.1KHz.
The microphone can be configured to sample raw data at 8KHz so why can we not configure the speaker to playback raw data at 8KHz. Is there something I'm missing? If not, is this feature in the roadmap?
i got a swf, which i've dynamically loaded into an mc called pitch_mc . After loading it want flash to stop the file from automatically playing, then have play and stop buttons that trigger the movie.
I can load movies fine, but i havent used transport buttons yet :S
i got a swf, which i've dynamically loaded into an mc called pitch_mc . After loading it want flash to stop the file from automatically playing, then have play and stop buttons that trigger the movie.
View 5 RepliesI have a situation where I am loading an SWF (using URL as source) using the SWFLoader component in Flex 4, and now I need to implement Pause/Play and Stop functionality.
View 1 RepliesI have a game where i add some cartoonish ants, that when they are clicked, they need to be removed from stage. There are 4 differend kinds of ants, so im doing a Math.random for picking which one to add. (ant 1+2+3 have 50% chance to spawn and 4th 50%)
Code:
rnd_nbr = (Math.random() * 5)+1;
I have a timer doing 10 tick, and i reset the timer to make neverending. Then i have a math random and if sentences adding mc' to the stage with movement from Tweener, and event listeners for clicks. But i cant figure out how to remove them when clicked. I have done alot of failed tries right inside the click_candy_anty function. I've left them commented out.
Code:
import caurina.transitions.Tweener;
var ant_index:Array = new Array(10);//index for ants
var ant_number:int;
[Code].....
Essentially, I've got a MC container that's created dynamically based off an XML file (basically for every <title></title> I've got, it makes a new "card"). Now within the context of each <title></title> grouping I've got <imgs></imgs> in which I specify the path to images that are related.All of that works perfectly, save for the external jpg files actually appearing on the stage. The MC I add them to does, but the external image doesn't.My problem is- I can't add the external images until they're completely loaded (or so it appears). The thumbnail BG I use is blank. So I know for a fact that the thumbnail BG isn't occluding the loaded thumbnails.
View 2 Replies[Code]...
That's the correct syntax for this? I want to be able to dynamically write to several textfields that exist on the stage but have not been dynamically placed there.
I am trying to make a swf with one FLV playback player and 6 buttons. I've got 6 different videofiles that I want to have linked to this swf. Some of the videos are quit large.When starting the Swf, the first video has to start, after playing it, it has to stop. Then you must be able to choose which video to play by clicking one of the buttons. I don't want to have small thumbnails of the video, just plain and simple buttons.I have to have all my files, both fla, swf and xml files in the same directory (I cannot have them stored in different folders, since I have to upload this to a cms system which has limited upload properties).
I've tried to find the right script on the internet, I'm not very good at scripting myselve, actually rather poor educated there.It seems to me that I have to make an xml file with a list of all my videos, I have my default swf ready, with a FLVplayback and buttons.Now there's just the coding part....
I have created two buttons for separate audio files. Essentially if you click on the button it will play and stop. This works great! I have also injected a SoundMixer.stopAll(); to ensure if you click between both buttons that it will stop the current audio file to play the next one. My problem is when I select the 2nd button for the first time everything seems to be working...it's when I attempt to click on the first button again, that it will require 2 clicks and then it stops and plays accordingly...anyone know how I could eliminate this annoying two click process?
[Code]...
I want a movie clip (let's call it homecontent_MC) with 100 frames play to frame 80 and stop.Then when someone clicks a button on the navigation bar (home, about, services, contact, etc...) homecontent_MC would then begin playing from it's position (frame 80) til it reaches 100, at which point it wouldn't be on screen, and the movie clip that corresponds to the navigation button press (say services_MC...) would start from frame 1 and continue til it stops at it's frame 80...
View 7 RepliesI got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.
I play games on Pogo and have never had a problem with their Flash Games until released Daily Hot Shots. It doesn't load fully and I've done EVERYTHING I know to do to get it to play. No errors show up. I can play ALL the other flash games but this one. When I right click, the name of the site's owners do not show up....I have the settings showing though Not all of the game loads and that's the problem. I've tried uninstalling and reinstalling....tried a different browser and have the same exact problem. THIS GAME WILL NOT PLAY.
View 2 RepliesI have five different scenes all including three different buttons. When I test the buttons in "play scene" - all buttons sounds correctly in all scenes. But when I play movie, there is sound only with one button (the same button in every scene). I have looked for differences, but this button seem to have all the same parameters as the others.
View 10 RepliesSo this is my code so far:
on (press) { // Gives your movie a button functionsgetUrl("http://www.astahost.com");}
on (rollOver) {this._alpha=100;gotoAndPlay("Scene 2"); }
[Code]....
when i play the movie, it plays scene 2, however, scene 2, which is in my flash document, plays automatically. how can i stop this? is there some code which only makes scene 2 play when called for and not play automatically.
So i've made my .swf files. The only thing is they all play at full screen when i play them using my web browser. I need them to play at 548 x 408. when i open the .fla and go to properties it says the size IS at 548 x 410 but it can't be if its playing full screen.
View 2 RepliesI have several products I want to animate with graphics and text individualy then stack them on a time line for output with play and pause buttons. Is there a tutorial somwhere that shows you how to do this? and how do I stop the entire animation on a frame, I don't understand "not_set_yet"
View 4 Repliessimple one this, or so i thought! basically, i want a mc to play from start to finish (11 frames) upon rollover and upon rollout i want it to play backwards to the first frame. Accurately.
ActionScript Code:
on (rollOver) {
if (activ.currentFrame <= 11)
{
[Code]....
Currently i JUST goes to the next frame. So i need something like currentFrame +1 or something?
I have modified the original to include more head shots accompanied by audio clips. I have worked out the playing of the clips on release. I realize now that people may not want to listen to entire clip. Each mug shot serves as the button to hear the person talk. I do not know how to modify the button code for it to be a toggle. I guess it would need to be some kind of "play if, stop if" The only part of concern is loading playing the the audio, no changes need to be made to the rollover functionality.
mugWidth = 60; //change these if you change the size of your mugshots
mugHeight = 60; //change to your mugshot height
//instantiate sound and textformat classes
[code]....
Root timeline: keyframe 1, keyframe 2, etc...
-keyframe 1 has a MC "frist MC"
-keyframe 2 has a MC "second MC", etc.
-the MCs are all duplicates containing different animation, but have the same AS inside them.
The construction of the MC is:Play intro animation -> Stop and wait for key stroke. If key is "space" set variable value to 1, if else set variable value to 0, then continue to play next frame. -> Complete the animation till the last frame.In the last frame check what is the value of the variable to check which key was been hit. If it was a space (var =1) go to root and play current frame +1 (go forward), Else, go to root and play current frame -1 (go back)Its a kind of slideshow.so heres the code in the middle, after the intro animation was played:[code] The problem with var reverse is, it works well in the first frame, its beign filled with value depending on what key is being hit, But in the last frame, when the time comes to check the value, trace says its "undefined".I have tried setting up a _global.variablename = reverse and it works in both frames (the check at the end is succesful, it detects the given value), but still the last frame only plays the currentframe -1 as if always executing the "else" command, no matter what the value of var reverse is.
how would you play the next 5 frames if the space bar was clicked and then stop the playhead?
View 4 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 Replies
