URL...I have created an animation which has the bird fly up & chirp, and would like to replace all the birds with this.For now I have replaced all buttons w/ the animation on stage and they all lie on the 1st frame. But thats kinda not what I want.How can I get any one bird animation to play, one at a time, at a random interval of 15-45 seconds?
View 2 RepliesIf I have some actions for a button and I want them executed 4 seconds (or a specific time interval) after the button is clicked is there a function that will do this?
View 2 RepliesI have "leaf" MC that floats across the screen. It's affected by a wind generator. I want to duplicate the leaf movie clip at random time intervals (between 2-9 secs).I can get the random time interval, I can dup the MC. How do I get it to re-set the interval and dup the MC at the new random time interval?The final effect I'm after is a MC that reproduces at random intervals every single time.
Some of my code so far:
// set time in between each clip
var seconds:Number = Math.floor(Math.random()*(8+1))+2;
// initialize depth
var depth:Number = 0;
[code]....
what i'm trying to achieve is to be able to create a random time frame betw 1 to 8 seconds before it calls a movie clip from the library.
Code:
function layEgg(hens) {
//set random time in sec
var timeGap = Math.floor(Math.random()*(8+1))+1;
[Code]....
however the time interval is not working. i managed to trace the random timeGap.
I'm testing Live streaming with FMSS. The stream is pushed to FMSS buy Adobe FMLE software. Streaming works fine until I reach 1300-1400 simultaneous connections.No matter what the encoding ratebit is (150kbps or 2000kbps) the stream is no longer play from time to time (5-8 seconds).
The CPU (2xIntel Quad) is loaded less than 20% and memory used is about 2 GB (there is plenty of memory installed 32G). The OS is RedHat 5.3 64bit platform. Network uplink maximum rate is 4Gbps.I disabled the Queue but the problem still persist.
If i want an animation to play after 20 seconds where there are no mouse movement, how should i write the codes? If within this 20 secs, there is movement, then it should restart counting from 0 seconds again ...
View 9 RepliesI want to play random videos after 10 seconds if the mouse has not been moved. I am getting this error:
[Code]...
I need a script that would play an animation consisting of 4 frames for, say 20 seconds. The order of those frames needs to be random but it has to stop after 20 seconds.Next, frames need to change each, say, half a second. But, as much as I MIGHT be able to figure this one out, here's what made me post here. The four frames are four keys on a keyboard. Each time frame changes to a corresponding key drawing, one has to hit the right key on the keyboard to make a different animation on the stage, animate.
View 14 Repliesi have a button on the stage...when clicked i want it to wait 2 seconds, then gotoandplay a porton of another movieclip
View 4 RepliesI need to play some mp3 sounds (bird songs), depending on keyboard events.
First I create my Sound and SoundChannel
var music:Sound=new Sound();[code]......
Everything fine till there but I need later to stop the current sound, and play a new one ...I made some tries ; I am able to stop the current sound, but unable to play another one .How should I proceed ?
I have a picture on the stage covered by 12 squares (sq1, sq2, sq3.......sq12)
When the movie opens I want the squares to move down, but i want a random sequence ( 3, 9, 2, 12...........8). I already made de function for the movement:
[Code]...
I have a website that I'm working on, and it's background consists of different full-screen images. right now, it's set up so that each menu button loads a new image file from a folder into the background mc. What I want instead is for it to load a new image every 30 seconds or so. There needs to be a transition between these images...either a direct fade or a fade to black then to the next image if easier. I doesn't necessarily need to be random.
View 1 RepliesHere is an extract of code from something im making:
if (MC_battleTrigR1a.hitTest(this._x, this._y, true)) {
if (random(220) == 0) {
//random(220) the code is onEnterFrame and so this random function is called
[Code]....
The player walks into an area, within a random amount of time or after 5 seconds it should send the player to the frame labelled: battle It works with the random(220) but I dont know how to make it definetly go to frame: battle after 5 seconds. I dont know how to use setInterval correctly, I have tried and failed.The code is nested in onEnterFrame fps: 24 frame label: treePath frame number: 17
I have the following actionscript which is working fine, but I would like to wait for some seconds each image once has reached the alpha in 100, if you see the example in the headerwhat it does is that the image fades in and when it gets to 100 starts fading out, and I want that when it gets the alpha in 100, keep it for let's say 5 seconds and then fade it out.
square._alpha = 0; whichPic = 0;
_root.onEnterFrame = function() { if (whichPic<4 && !fadeIn && !fadeOut) { fadeOut = true; whichPic++; } else if (whichPic>=4) { whichPic = 1; } if (square._alpha>10 && fadeOut) {
[code].....
In the timeline I have a main menu on frame 1 and four subsections on frames 10,20,30, and 40. I have four buttons on the main menu label("button001"; "button002";"button003", and "button004"), each one is sending the movie to a specific label (i.e: "section001", frame 10; "section002", frame 20; "section003", frame 30; and "section004", frame 40). In each one of those specific frames/labels (10,20,30,and 40) I have a movie clip that contains the section. It starts with a simple animation and ends in a stop. And this is what I want to do: play the animation just once.
Let's say in the main menu; when pressing one of the four buttons, the movie goes to one of those specific frames and the animation starts. For instance, I press "button001" and send my movie to the "section001" label. Then I return to the main menu and press again the "button001"; I don't want the animation to play again, I want to start in the stop point. So, I think about using some kind of conditional, but it's not working. Inside the "section001" movie, I put the following code on the first frame:
ActionScript Code:
stop();
var section001_intro = false;
if (section001_intro = true){
//"section001_stop" is a label I put on the last frame of the movie clip
gotoAndStop("section001_stop");
}else{
nextFrame();
}
Then on the last frame, when the movie stops, I wrote this code:
ActionScript Code:
var section001_intro = true;
So, my idea is that the first time the movie is played, the animation is played; then, I indicate in the last frame that the move has been played. next time I go to the "section001" label the movie must skip the animation and go directly to the "section001_stop" label.
I have the following code that brings in a movie animation. My problem is that once the animation is finished and the user presses the 'back' button to navigate elsewhere on the website, if they go back to the animation and click the 'great_btn' the animation won't play again.
ActionScript Code:
_root.main_cntr.btns_mc.great_btn.onRelease = function() {
loadscrollIt(); disableBtns(btnArray);
[code]......
Given a scenario where i have 3 movieclip that is playing together at one time, is it possible when i click on a button, a new movieclip will be loaded while 1 of the currently playing movieclip will be randomly removed/opacity reduce to 0?
View 0 RepliesI have 10 mc's on my page which I want to load from alpha = 0 to 100, one at a time, but in a random order each time the page is loaded. I have code which uses an array to loop the mc's and I can then load the array into a tween using as2, but I don't know how to randomly create an array, then load these answers into a tween and play them one after another until the loop is complete.
View 1 RepliesI have 10 mc's on my page which I want to load from alpha = 0 to 100, one at a time, but in a random order each time the page is loaded. I have code which uses an array to loop the mc's and I can then load the array into a tween using as2, but I don't know how to randomly create an array, then load these answers into a tween and play them one after another until the loop is complete.
View 7 RepliesI can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesHow do you make a movie clip play at a random time? And keep on playing at random times until the flash movie is over.
View 1 RepliesI am working on a quiz, I need to play an animation each time before a question comes up. On clicking next button I fire this code
[Code]...
I recently got back into animating and I need some help with my latest project. I have a number of different animations that I would like to be played on the inside of a tv, however I would like for these animations to play at certain times. For example, at 9:00 pm (real time) the tv displays the animation of the character sleeping. I'm not sure how to do this, and I'm not sure if I need an internal clock.
View 6 RepliesI made a simple 15 second animation. When I play it in the program (not published yet), it plays fine. When i publish it however (I have tried both flash published and HTML published), it plays about 3/4's of the way, and restarts. The second time through (and from then on), it plays fully, just fine. How do I stop this?
View 1 RepliesI'm creating a banner navigation with quick animation and I just want to PLAY the animation when user visit the page for a first time OR only in homepage (index page).Basically when visitor go to another pages, they won't see the "banner" animation over & over again. How to accomplish this ?
View 3 RepliesI'm trying to write a card counting counting program and am having issues with the pause on my set interval. Basically, the problem comes when it starts running out of cards; the pause gets longer. how I can make the pause wait until after the card is attached?
Code:
Stop;
card_name = new Array("2", "3", "4", "5", "6", "7", "8", "9", "10", "J", "Q", "K", "A");
card_value = new Array(1, 1, 1, 1, 1, 0, 0, 0, -1, -1, -1, -1, -1);
card_suit = new Array("Hearts", "Diamonds", "Spades", "Clubs");
[code]....
I have a logo which animates one time and stops. What I would like is, it should loop every 5 seconds interval. The following is the action scipt 3 written in the flash document.
var l:Loader=new Loader();addChild(l);
l.load(new URLRequest("MyLogo.swf"));l.x = 100;l.y = 100;
l.contentLoaderInfo.addEventListener(Event.INIT, growLoader);
[code].....
I made a semi-sinewave effect (view attachment) and it works fine with one exception. I want for it to wave on random intervals (from 1-15 seconds) instead of continuously, but I can't get it working right. Here's the code:
[AS]
pts = 5;
sine = 0;
[code].....
On my main timeline I have a movieclip with an instance called "eye". What I would like to happen if for a random number to be generated and assigned to "blink". If blink = 20 then I want to play "eye"s animation. This is the code I have so far:
[AS]
blink=Math.random(20)
if(blink=20){
_root.eye.gotoAndPlay(2)
}
[/AS]
I've told the eye animation to stop() in the first frame to stop it from animating before being told. I know this won't work yet, I haven't worked out how to put this code in a loop to keep generating a new value for blink, and test if it is 20.
I cant clear the time on the set interval. try to stop the time around about six seconds or so.
ActionScript Code:
var myInterval = setInterval(time, 2000);
function time (){
[Code].....