Ok, what i need to do is have something force the mouse to the center of the stage. So if the user tries to move to the top left, it get more and more difficult and they have to scroll more and more as flash is always trying to take it back to the center. Ive had a dig around, and I see its impossible to actually control the mouse postion using a.s. Is there anyway around this, faking it or something
View 4 RepliesI'm attempting to control 2 different shapes (a red rectangle and a blue rectangle) with the same sequence of mouse events (down, move, up), but only one shape at a time must move. The shapes are locked horizontally along the x-axis. The red rectangle, which starts out on the left side of the stage, has a right-registration while the the blue rectangle on the right side of the stage has a left-registration.
The rectangle that moves during the MOUSE_MOVE events is the shape that is closest to the *MOUSE_MOVE* event's stageX property. The closest rectangle is determined by averaging the x property of each rectangle (averageX)in relation to the MOUSE_MOVE stageX property. Therefore, if stageX is less than averageX, the shape on the left should move. Greater than averageX, the shape on the right.
The problem occurs when control changes rectangles during subsequent MOUSE_MOVE events, before MOUSE_UP. Variables that are set during MOUSE_DOWN are appropriate for the rectangle that is moved first, but things become dicey when the other rectangle is to be moved instead. Basically, the rectangle whose x property is closest to MOUSE_MOVE event's stageX property should move along either left or right with the mouse event, one at a time.
For simplicity with the following code example, a MOUSE_DOWN event could always occur somewhere between the two rectangles.
package{
import flash.display.Sprite;
import flash.display.Shape;
import flash.events.MouseEvent;
[Code] .....
how to controll the timeline via moving the moiuse in x (left to right ).basicly i wsant to shocase a sculpture of mine in a seemingly quicktime vr fasion. so i will take lots of images of the sculpture in difrent agles to get the 360 degreemovie. then import intoflash timeline. Then somehow i need a script to control the scrub the timeline images (to create the quicktime vr look )
View 17 Repliesis there a way in as3 to mute a video inside a movie clip if the mouse x position equals less than, say 200px?
View 1 RepliesThe code below is currently what I am using to use the middle mouse wheel to control the position of the page... sort of a DIY page scrolling mechanism, luckily I only need up and down ( ._y property)...
ActionScript Code:
mouseListener = new Object();
mouseListener.onMouseWheel = function(delta) {
[code].....
I followed infinite menu tutorial somewhat successfully but not quite for this effect:The graphic is 2400 pixels wide and the movie is 600 pixels wide. But, for some reason it's skipping, and not showing the full image:What do I need to change in the code to make it roll continuously showing everything? I'm just clue
View 4 RepliesSo I want to control a movie clips rotation with the location of the mouse, with easing if possible. But I am having some trouble figuring out where to start
View 2 RepliesI created a 300x250 Web banner for Google with a mouse trail effect. The banner will not upload because, according to the Google tech people, the banner contains animation that goes "out of bounds." Common sense tells me that if a mouse effect is applied to a Flash banner, then it should only be occurring when a user mouses over that banner. However, I was told that the mouse effect does indeed take place outside the 300x250 banner boundaries, which is preventing the banner from being fully uploaded live.
Does anyone know how to define the stage area so that the mouse effect only occurs in this 300x250 space? Perhaps the only way to get around this is to create a 300x250 hidden button and somehow make the mouse effect occur on rollover. If that is the case, then does anyone know how to do that?
how in mx do you make it so on mouseover the mouse doesnt turn into "the hand" or "click" shape and just stays in it's normal state as if it were over a non dynamic object?
View 14 RepliesI have designed a menu that When you mouse over it, a custom cursor appears. When you mouse down it disappears and when you mouse up it returns. If you happen to mouse down and then drag the mouse off of the menu (whilst in mouse down) and then mouse up outside the menu, the custom cursor disappears. All good. The only issue is: If you happen to mouse down on the menu and then drag the mouse off of the menu AND off of the stage, i.e the SWF (whilst in mouse down) and then mouse up completely off of the stage, the custom cursor appears at the point it left the menu. I have tried to fix this using MOUSE_LEAVE but this dosnt work when the mouse button is pressed down. I have attached an FLA, SWF and the AS below.
Code:
stop();
import com.greensock.*;
import com.greensock.easing.*;
import flash.events.MouseEvent;
[code]....
These issues only appear on Safari and Firefox on Mac.I tested with Opera and Chrome and Windows (inc. IE), but they work fine.
Mac OS 10.6.8
Firefox 5.0.1
Safari 5.1
Flash CS5.5
1 Hiding the original black arrow cursor (Firefox only)When cursor rollovers to an Invisible button (oneBtn), I want to show custom cursor (newCursor) and hide mouse. But Firefox shows the custom cursor as well as the black arrow...
2. Mouse.show doesn't work only on Safari, Mac.When rollout to the invisible button (oneBtn), the custom cursor (newCursor) hides but the mouse doesn't appear. This happens only on Safari.
stop();
Mouse.show();
newCursor._visible = false;
[code].....
I have a map application that when I use the mouse wheel the map will scale up or scale down. The next thing I want to do is to focus on the mouse pointer while zooming on the part of the map.
I have this code...
function focusMousePosition(){ onMouseMove = function (){ Stage.width = _root._xmouse; Stage.height = _root._ymouse; updateAfterEvent(); }}
var mouseWheelListener = new Object();var wheelNum:Number;
mouseWheelListener.onMouseWheel = function(wheelNum){ focusMousePosition(); if (wheelNum > 0){ map._xscale *= 0.9; map._yscale *= 0.9; }else{ map._xscale *= 1.1; map._yscale *= 1.1; }}Mouse.addListener(mouseWheelListener);
I have a very simple piece of code but it has one very annoying bug. When I press the button a second time, the code doesn't work. The only way to get the code to work is by moving the mouse a tiny bit, or moving the mouse off the button and back on. make a button that can be clicked many times without moving the mouse?
Code:
randommultiquiz.onPress = randommultiquizOnPress;
function randommultiquizOnPress() {
_root.attachMovie("connect", "newconnect", 200);
newconnect._x = 0;
[code]....
Is it possible to use a movie clip to block the mouse from activating the stage MOUSE_OVER event?
View 4 RepliesIn a project i'm doing I have a custom cursor, using the start drag command and mouse.hide. the issue being that the movieclip being dragged is blocking the mouse from initiation mouse events properly.
View 3 RepliesI have a movie clip I am using as a button (instance name btn1) and I added an event listener to it (using the following line): btn1.addEventListener(MouseEvent.MOUSE_OVER, animate1); the function "animate1" triggers some small animation when the mouse is over the movieclip. my problem is that the animation is triggered both on mouse over and mouse out events.
View 5 RepliesIt has been awhile since I have worked in flash.Right now I am working on something where I would like a panel to disappear when someone mouses off the stage.stage.addEventListener(Event.MOUSE_LEAVE, leaveHandler); It usually works fine but if I move my mouse really fast it doesn't fire. I have also tried the same thing using a custom invisible button that surounds the perimeter of the stage and I have tried ROLL_OVER and MOUSE_OVERand again, if I do it too fast my event doesn't fire (I am using trace)I can't find anything on the net about this - is this typical of flash that if you move your mouse too fast you break it? Do I need to increase my frame rate (I would really rather not because I have perfectly timed animations - I am at 30 frames per second)
View 1 Repliesi was trying to do in the above subject title... I have now decided to create a project using AS3 and would again be in any of your debts if you can guide me towards a similar code / function to the following:
var nTimeoutId:Number;var nTimeTolerance:Number = 6000;
import mx.utils.Delegate;
_root.onMouseDown = Delegate.create(this, setUserActivityTimeout);setUserActivityTimeout();
[code].....
when the mouse rolls over an image, text appears (in a small rectangle) and it moves with the mouse, only while it is still over the image.
Or at least, does anyone know what this is called or how to do it?
I have a flash that has a background symbol that responds to CLICK event. On top of that symbol I have a sprite that contains a Bitmap with transparent pixels. Both of them are added to the stage, so they are not related directly.
I want clicks on the transparent pixels on the sprite to go straight through to the background. I have read about mouseEnabled / mouseChildren but have not been able to make these work. The symbol ignores the mouse events when I use them, but does not pass it along as if its transparent.
Is this possible to do with flash? Or will I have to re-route mouse events?
As of Flash 10.2, Flash supports hardware accelerated mouse cursors:[URL]..Unfortunately, the mouse cursor doesn't update until AFTER the mouse moves. You can see this behavior on the web page above. If you click "Set to custom cursor" in the sample app at the bottom of the article, you'll see that the cursor doesn't change until you move the mouse.
Anyone have a trick for updating the mouse cursor immediately, before the user moves the mouse? I tried doing Mouse.hide(); Mouse.show(); but that doesn't work.
I am creating mouse scroller and when I insert actionscript my images wont move depending on the mouse movements..I am using Flash cs5 and Actionscript 2.0...this is my actionscript:
[Code]...
I changed the mouse cursor using a tutoral from this forum, but when I press the right mouse button,the standard mouse cursor reapears.How to prevent that?
View 10 RepliesThe title pretty much sums up what I am trying to do: I haven't started digging into using script in Flash yet, still being very much a beginner.
I created a simple file using movie clips nested in buttons so that when I mouseover a letter, it bobs up and down, but I can't work out how to make it return to its original "up" state *smoothly* when the mouse is moved away. If it must involve script please be aware I am a total noob!
I have a "large" movie clip and "small" movie inside a "large" movie clip but on it's let's say upper right corner:
Code:
largeMc.addChild(smallMc);[
If i try to catch Mouse.DOWN events on them the following way:
Code:
largeMc.addEventListener(MouseEvent.MOUSE_DOWN, largeClicked);
smallMc.addEventListener(MouseEvent.MOUSE_DOWN, smallClicked);
Then of course both event are captured no matter where i click.Is it possible to capture independent mouse clicks on both of these two movie clips and if so, how can i do that?
i have a following situation: I have a "large" movie clip and "small" movie inside a "large" movie clip but on it's let's say upper right corner:
Code:
largeMc.addChild(smallMc);
If i try to catch Mouse.DOWN events on them the following way:
Code:
largeMc.addEventListener(MouseEvent.MOUSE_DOWN, largeClicked);
smallMc.addEventListener(MouseEvent.MOUSE_DOWN, smallClicked);
Then of course both event are captured no matter where i click.Is it possible to capture independent mouse clicks on both of these two movie clips and if so, how can i do that?
I would like to make a flash movie with a picture, where when the user holds down the mouse button, part of another picture will emerge in that general area (like a magnifying glass looking into another dimension).
Technically, my idea was to make a flash file with two images, and then code the mouse to be able to make the top picture transparent in a circle-like area around the cursor, while the mouse button is down.
But how to do that? I am using Flash CS4, but I don't really care if the solution is in AS2, or AS3, as long as it works
I dont know if it is possible, but I need to disable reaction on mouse.
Here is the example. Dont worry about the second snowboard. If mouse remains on the first, movie still replay over and over. How do I stop it?
[URL]
I have a class called Mouse (tracking button states in a game). I want that class to be able to show and hide the mouse cursor. Whenever I try to use flash.ui.Mouse.show() or flash.ui.Mouse.hide() I get the error: "Access of undefined property flash.".
I can't import flash.ui.Mouse for obvious reasons.
Is there a way to make this work? What's the point of packages if they don't resolve these collisions?
I am trying to have two guestures on a SpriteVisualElement which I thought should be pretty simple implemented: Mouse_Move for sweep Gestures and mouse click to enable.. So I have 2 Eventlisteners on my stage:
[Code]...
The main problem is that every type of sweeping on the screen also fires the taphandler().. how to identify the correct event? I tried to to my taphandler only if(!event.buttondown) but no success.