I would like some help on writing a piece of code.I need to write a function that if some movie clips are in some x and y value, then gotoAndPlay('end');
Code:
function gotoEnd() {
if
(tv_mc._x = 41.8;
tv_mc._y = 157.3;)
then
gotoAndPlay('end');
}
How can I mention in the actionscript 3 that the movie clip on frame no. 10 should play after the webpage loads (or after 1 minute)? then stops? The code would be on Frame no. 1.
View 3 RepliesI have an fla that uses the following AS:
PHP Code:
envisionblur._alpha = 100;
envisionblur.onRollOut = function(){[code]...........
I have four MC's that I want to fade onRollOver and onRollOut. As you can see, writing code for each MC is a rather convoluted way to achieve the effect.how to write the code as a function and apply it to all of the clips?
I have some sendAndLoad code which works good. Instead of outputting something to a text box I'd like to go to a different place in my movie. I've got quite a few embedded movie clips and the path is the following: pages_all -> action sc copy 12 -> action content copy 13. Within the pages_all movie clip I'd like to go to frame number 13. How can I use the gotoAndPlay function to go to another movie clip. I did try the following:
this._parent.gotoAndPlay(13)
That didn't work.
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
I have an avatar that's made up of several child movie clip sink points such as head, arm, pants, etc. I'm trying to be able to swap out items, such as a new hat, new gun, etc dynamically based on the user's selection.
I'm able to modify a regular movie clip in AS3, but I've now moved to having a avatar that's composed of several labeled animations such as "walk" "idle" "jump", etc. The problem is, once I modify the avatar, and do a gotoAndStop("walk"), the avatar reloads all the original assets that were created when the avatar was rigged up.
is there a way to refer to all movie clips on the stage or apply a function to all movie clips without applying the function to all manually?
View 3 RepliesSo I've defined my variable:_global.current = 1;And below i am accessing an MC called 'carousel_holder', which has an MC named 'bar' and inside this MC is a final MC named 'bar1'.So ive tested my path and can hard code it fine, so its not a paths issue but i think my syntax is incorrect:_root.carousel_holder+".bar"+current.gotoAndPlay(" start");
View 4 RepliesIn my movie I load a swf to a movieclip with this code
PHP Code:
_root.ImageViewer.loadMovie("deneme.swf");
Now can I do this? before calling the swf named deneme. When I press a button If I attain a number to a global variable with this code
PHP Code: on (release) {_global.myVar = 5;gotoAndPlay("CloseUpAnimation");}
Can I read this variable from the swf which I load into my movie?If I can read how can I write a If Statement that will gotoAndPlay according to that variable?
PHP Code:[code]...
In the FLA file i have two animations of a turbine and a fan turning one is controlled via a button the other is a loop action that is not controlled.The button control is simple telling the movie clips to got frame 2 and play,and on the fan and turbine movie clips I have a goto and play frame 2 action the end of their time line. By doing this I get a rotation effect .
The problem is that when I call play function from the start button the movie clip does not play properly and just shudders between frames,rather than way it should run as a looped animation.
I was looking at this thread about the watch function and would like to use it to detect changes on movieclips properties.
View 3 RepliesHow do I apply one variable and one function to many movieclips?[code]The reuseFade function works if I target the movieclip by name on the stage,ex: var T1:Tween = new Tween(mc_black1, "alpha", Strong.easeIn, 0, 100, 5, true);using "this" doesn't work.The only way I know how to make this work is creating four functions to handle the event
View 7 RepliesimportSubtemplate = new XML();
importSubtemplate.ignoreWhite = true;
importSubtemplate.onLoad = function(success) {
[code].....
I have this page that has 8 movie clips, and I want to make these movie clips function as buttons. I got that part done already, but what I need now is the Rollover part. I made one separate animated movie clip that'll function as the rollover, so whenever a button is rollovered the animated movieclip will play on top of that button. So my question is how do you designate the one animated rollover movieclip to play on top of each separate button when they are rollovered on? Hope it's not too confusing to understand.
View 3 RepliesHow would I apply my existing function that involves calculating the x and y position of a specified movie clip, to multiples of movieclips. MY MOVIECLIPS on stage are
Code:
Ball_mc
Ball_mc2
Ball_mc3
MY FUNCTION is
Code:
function hitDetect(event):void {
var ballX:Number = (ball_mc.x-videoX)/sizeDif
var ballY:Number = (ball_mc.y-videoY)/sizeDif
[code]....
Should I use Arrays? Loop?
Call the load function on a loader two movie clips down?
View 1 RepliesThis is my first action script project and I'm having trouble with some positioning of movie clips that I can't work out. I'll post in the parts of the code that I think are relevant in hopes that someone may be able to see what I am missing. The problem is that according to my traces my gridSnap function should be working. The trace shows mc.y to have the correct value while the movie is running yet the mc's in question are appearing in the wrong spot (they appear at GRIDSIZE*gridNumber) in the movie. The problem only manifests itself in case one and case three, both of which should have the same code but I was only testing different approaches in case one. On with the code:
[Code]...
So I want to make some movie clips function as buttons to load some external swfs. I have this action script on the mc's:
on (release)
{
loadMovie("Chuck.swf", "motionmc");
}
It was working when it was a button, but now nothing happens?
is it possible to write a function to move an object and then call that function on a clip event for instance
function (bounce){
script;
script;
}
and then call it by saying
on(mouseOver){
this.bounce;
}
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
On my first frame, I have: 6 buttons (p1 through p6). A holder mc_holder, which holds mc_pages, {a movie clip that shows 6 pages (each their own movie clip, page1 though page6) tweened across the screen, made to look as if the pages are being "flipped" through).
The following code:
Code:stop();
var _holder = mc_holder.mc_pages;
var picked;p1.goal = 1;
p1.onRelease = goPage;
p2.goal = 10;
[Code] .....
The problem is, as soon as the movie loads, ALL these animations begin to play. I am looking for a solution so that the animations will not play until the page is viewed. I am thinking I can put a stop on the first frame of each page, and a frame label ("go") on the second frame. Can I add this (my knowledge is limited but say... gotoAndPlay (go")) to the code shown above? I have tried messing around with it but have not yet had any results.
I'm having trouble getting a game to go to the end scene after a collison with a barrier.
Code:
function dead() {
clearInterval(ants); //stop spawning
[code].....