ActionScript 3.0 :: Mouse Event For Mouse Stand On An Object?
Feb 27, 2012
I'd like to animate a button when I put the mouse over it. I use mouse_over or roll_over events, ok. But what if I hide the button when I click it and then I show it again later without moving the mouse? The mouse stays over the button, but the button does not animate, as there is no out/over event: I have to move the mouse out and over again to see the animation.
How can I detect the mouse standing on a button without the out/over event?
View 3 Replies
Similar Posts:
Oct 26, 2010
Is it possible to use a movie clip to block the mouse from activating the stage MOUSE_OVER event?
View 4 Replies
Feb 3, 2010
I have a flash that has a background symbol that responds to CLICK event. On top of that symbol I have a sprite that contains a Bitmap with transparent pixels. Both of them are added to the stage, so they are not related directly.
I want clicks on the transparent pixels on the sprite to go straight through to the background. I have read about mouseEnabled / mouseChildren but have not been able to make these work. The symbol ignores the mouse events when I use them, but does not pass it along as if its transparent.
Is this possible to do with flash? Or will I have to re-route mouse events?
View 2 Replies
Jan 22, 2009
I have a "large" movie clip and "small" movie inside a "large" movie clip but on it's let's say upper right corner:
Code:
largeMc.addChild(smallMc);[
If i try to catch Mouse.DOWN events on them the following way:
Code:
largeMc.addEventListener(MouseEvent.MOUSE_DOWN, largeClicked);
smallMc.addEventListener(MouseEvent.MOUSE_DOWN, smallClicked);
Then of course both event are captured no matter where i click.Is it possible to capture independent mouse clicks on both of these two movie clips and if so, how can i do that?
View 3 Replies
Jan 22, 2009
i have a following situation: I have a "large" movie clip and "small" movie inside a "large" movie clip but on it's let's say upper right corner:
Code:
largeMc.addChild(smallMc);
If i try to catch Mouse.DOWN events on them the following way:
Code:
largeMc.addEventListener(MouseEvent.MOUSE_DOWN, largeClicked);
smallMc.addEventListener(MouseEvent.MOUSE_DOWN, smallClicked);
Then of course both event are captured no matter where i click.Is it possible to capture independent mouse clicks on both of these two movie clips and if so, how can i do that?
View 5 Replies
Sep 22, 2009
I need to perform an event when the mouse moves AND when the mouse button is down, how can I do that? What will happen is that when I click and drag the mouse, the width of an object will change. Here is what I have so far:
[Code]...
View 5 Replies
Jul 27, 2010
Frame 1
Code:
band_button.buttonMode = true;
band_button.useHandCursor = true;
[code].....
View 3 Replies
Aug 11, 2010
Basically I am dynamically calling product buttons, which on rollover invoke a child of a dropdown, which in turn invokes children which are squares filled with colour.What I need is for these squares to be clickable which will then colour something else using the colourMatrixFilter (I'll probably start another post for this problem at a later date).For some reason though adding the Square as a child to it's rightful parent - the dropdown makes the listeners completely useless. Add to the stage and the listeners work. I can't work out why either and have done loads of searching.[code] also if someone could show me in the right direction of pulling the XMLdata for the squares (which will be a name attribute).
View 4 Replies
Mar 23, 2010
I have isometric tiles that are put together to form a map. Because the graphics are isometric, and the images themselves are rectangles (with transparent corners) I was wondering if there's way to pass a mouse event through image being clicked if it's being clicked at a point that is transparent onto the object that is layered below it. Using the bitmapData class I already know how to check if the position being clicked is transparent or not, just not the second part.
View 3 Replies
Sep 1, 2011
I'm wondering how is this task done that listen to mouse move event when user cursor is out of stage?
View 6 Replies
Sep 28, 2010
I have a map of items and I need to know when a mouse moves over the item. Should I add a event listener for mouse over and mouse out to each item (there may be a lot) or I should add mouse over and mouse out listeners to whole container and do some checking to detect whether the target has item on it or not? In the second way it would mean that the event would occur on entering each map tile in the container i would be listening. This seems a bit pointless, but I heard somewhere that I should add as little as possible.. So what should I do?
View 2 Replies
Mar 14, 2011
I am looking to provide some UI functionality using the mouse- I have two distinct UI events to be achieved via mouse
a) change value
b) delete object
I don't seem to have sufficient mouseclick events for both. I am avoiding using the right click as it has some default options(whose signing off will affect the whole project- not just this). I have mouse click used for change value- how do I use the doubleclick as the single-click events seems to get invoked prior?
View 2 Replies
Mar 25, 2012
i just wanted to know if it is possible to check in mouse event whether the object is grabbed or not in Action Script.
For example: youtube video player is also built in flash. and when we grab the track, it just stays with the mouse pointor and when we release it. it stops wherever we left it.
View 2 Replies
Jun 21, 2010
I'm building a custom UI for a program and I'm having trouble with a mouse event on an object that is visible, but is |. Imagine the top object being a frame and the lower object being a photo. I want to detect mouse events on the photo. So what happens currently is that only mouse events on the top object are detected. Thoughts on how to get around this?
View 3 Replies
Mar 4, 2010
Is it possible to do something similar to this pseudo code?
var oMouseListener:Object = new Object();
oMouseListener.onMouseUp = function() {
if (Mouse.clickTarget is a MovieClip) {
[code]....
View 5 Replies
Apr 21, 2011
I have to develop an application in flex. In that application an user can draw line while dragging the mouse. Then if he clicks on that line it should be selected. How to add mouse click event listener to a line object?
View 3 Replies
Jun 10, 2011
I have a situation where I am allowing the user to drag a movieclip by means of startDrag and setting a rectangle. However while they are dragging this about, I want to register when the mouse moves over another object, however I can't seem to get this to work while they are dragging the object.
View 2 Replies
Apr 18, 2004
Is it possible to do something similar to this pseudo code?
var oMouseListener:Object = new Object();
oMouseListener.onMouseUp = function() {
if (Mouse.clickTarget is a MovieClip) {
[code].....
View 5 Replies
Feb 15, 2011
Ok I have this 100% width/height Flash embedded and when the user moves the mouse I want to display a panel, which disappears after x seconds if there is no more mouse movement.
I think I need an addEventListener, but I am not sure MOUSE_MOVE is the correct one. When the mouse stops moving I need to start x seconds to hide the panel, so I think with a timer?
[Code]...
View 1 Replies
Oct 25, 2011
I have a MovieClip. It represents animation of jumping monster. For clearness, let's pretend there are only 2 frames: the first one occupies top left rectangle (x = 0, y = 0, w = 70, h = 70) and the second one occupies (x = 100, y = 0, w = 70, h = 70). So monster jumps from left to the right. And position of MovieClip itself is constantly = (0, 0).
I'd like to fire some event when monster is clicked by mouse.
For some reason, I have stage mouse listener, not monster mouse listener. I wrote this code:
stage.addEventListener(MouseEvent.CLICK, onClick);
private final function onClick(e:MouseEvent):void {
const clickPos:Point = new Point(e.stageX, e.stageY);
// having monster:MovieClip, how do I check hitting it?
[Code] .....
View 1 Replies
Apr 7, 2009
I'm having an issue with MOUSE_OUT triggering before MOUSE_OVER has a chance. I have a global mouse listener class that listens to every mouse event and sends the object involved a message telling it when a mouse event has happened. When a Menu object is opened it adds a bunch of children and when it's closed it removes them all. The problem comes when moving the mouse from the Menu to the Children, Menu receives a MOUSE_OUT event and closes before the Child receives a MOUSE_OVER.
View 2 Replies
Jan 22, 2009
I'm trying to listen to the mouseWheel event when a user hovers an object and scroll the mouse wheel. My problem is that the event only dispatches when the object with the listener has been clicked.
After the object (or the stage) has been clicked the mouseWheel event dispatches as expected.
How can I make it dispatch witchout clicking the stage/object? I've attached a simple sample file to show you what I mean. Hover the colored box and use the mouse wheel. Then click anywhere on the stage and hover the box again and use the mouse wheel.
View 7 Replies
Jun 27, 2006
how to do an object move towards the mouse when i move the mouse the towards the object and backwards when i move the move away, something liike the menu on [URL]
View 2 Replies
Dec 24, 2011
I've been reading a lot about the benefits of Object Pooling. Found some "tutorials" online, all above my skill level. Can anyone please show me an extremely simple example of an Object Pool. What my game does is creates Ball objects when the user holds down the mouse, stops when user lifts up mouse. I need to store these Ball objects in an array(or Vector), and hit test them with other objects, removing them from the stage when the hit another object. I'd like to create a pool of say 20 of so, created once, and recycle them.
[Code]...
View 1 Replies
Jun 24, 2010
I have designed a menu that When you mouse over it, a custom cursor appears. When you mouse down it disappears and when you mouse up it returns. If you happen to mouse down and then drag the mouse off of the menu (whilst in mouse down) and then mouse up outside the menu, the custom cursor disappears. All good. The only issue is: If you happen to mouse down on the menu and then drag the mouse off of the menu AND off of the stage, i.e the SWF (whilst in mouse down) and then mouse up completely off of the stage, the custom cursor appears at the point it left the menu. I have tried to fix this using MOUSE_LEAVE but this dosnt work when the mouse button is pressed down. I have attached an FLA, SWF and the AS below.
Code:
stop();
import com.greensock.*;
import com.greensock.easing.*;
import flash.events.MouseEvent;
[code]....
View 1 Replies
Jul 7, 2011
I am trying to learn JavaScript and I am wondering whether JavaScript has a event listener just like ActionScript's ENTER_FRAME. Basically, I want this event listener to listen "all the time" not just wait for any particular instance (mouse click, keyboard event) of event.
View 3 Replies
Feb 23, 2011
My stage has about 25 buttons on it. Each button when pressed to tweens the background to some random x/y coordinates and then loads an external swf file.This is all working, but the timing is off. How can I wait for the initial background tween to end before I make the loader call to the .swf file.Currently each button's behavior is called on the MouseEvent.CLICK event which calls a function that knows its unique filename.swf. I know you can add the MOTION_FINISH even to the tween event but then I would have to call a new function and lose track of the button that initially called it.
View 3 Replies
Aug 20, 2009
This is a very basic question but I can't seem to find an answer. I have a mouse over event and have created the buttons with the mouse overs which is working great. I created the actionscript to go to a specific web page when a user clicks the button. Now, I need to add a label to the mouse over so when someone mouse's over any area of the button, it will show them a particular name for the button.
I am sure that this can be done using actionscript in a mouse event roll over command but I can't figure out what I need to show the text. Here is where I am:
[Code]..
View 6 Replies
Aug 24, 2011
what should i do to get chart's data on the click of respective data Legend. suppose i have array [{id:123, label:sales, year:2010},{id:124, label:refunds, year:2010}]for a column chart which has year in x-axis and sales iny-axis.two legend showing labels sales and refund.What i want is to get the whole data (id:123, label:sales, year:2010) on clicking of the legend 'sales'.What should i do? I tried listening mouse click event and itemClick event.
View 1 Replies
Apr 23, 2009
When game starts, the car runs automatically. Then we click the SPACE button, movement of car stops. And the door of structure near car is available to CLICK.
But in coding I got this error code:
TypeError: Error #2007: Parameter listener must be non-null.
at flash.events::EventDispatcher/addEventListener()
at shfg_fla::MainTimeline/key_pressed()
This is some part of my game code...
case Keyboard.SPACE :
removeEventListener(Event.ENTER_FRAME,car_movement);
--street_mc.bluehome_mc.door_btn.addEventListener(MouseEvent.MOUSE_DOWN,door_ready)
[Code]....
View 1 Replies
