ActionScript 3.0 :: MouseDown And MouseClick Event Conflicts - Get Ignored
Nov 5, 2008
I'm working on a custom AS visual component, based on UIComponent class. Inside this component, I have a button I programatically added. I set the mouseClick event of it, and it works fine. When the mouseClick for the button starts, it adds a listener for MouseDown on the stage. This is my problem. Once that MouseDown event listener is initiated it won't ever pay attention to the MouseClick listener of the button (which will
turn off the MouseDown listener!). I've tried setting the priority number when creating the listeners, but this is not working. My mouseClick listeners gets ignored.
View 3 Replies
Similar Posts:
Nov 8, 2011
I have this movieClip container/holder with several movieClips inside.The container is draggable over the Y axis with TOUCH_BEGIN(same as MOUSE_DOWN) and stops dragging with TOUCH_END(same as MOUSE_UP).But the movieClips WITHIN this holder are clickable with TOUCH_TAP(or CLICK).
Here's the problem:When I start dragging with my finger(mouse) on one of the movieClips within the holder, and release with my finger(mouse) still on the movieClip (I have an ease added to the dragging so it's possible my finger(mouse) won't be on the movieClip when done dragging) it will fire the function of this movieClip.This is really annoying because what if you started dragging, and wanted to click the movieClip beneath the one your finger(mouse) is on right now.I already tried something with removing/adding eventListeners but that doesn't work.
View 1 Replies
Feb 16, 2009
I have a series of buttons on a page that I want the user to be able to re-arrange. To do this, I have a MOUSE_DOWN event listener that triggers a startDrag. However, these buttons are also essentially menu items so when user clicks on them, they should load the appropriate URL. I don't want them to act as menu buttons when a user is trying to move them about. I have three event listeners on each button, one for the MOUSE_DOWN and one for the CLICK event and one for MOUSE_UP but the function associated to the CLICK event also fires on the MOUSE_UP.
View 1 Replies
Sep 30, 2011
I have a parent sprite that contains several child sprites. I have attached mouse click and mouse down event amongst others to the parent sprite. And in the listeners I check which child has been targeted using the "event.target" property. However It seems that the mouse click event does not trigger for some reason. Is it possible that the mouse down event is eating up the click event. Is this a know issue in as3 and is there a possible workaround?
View 3 Replies
Feb 20, 2009
I modified a mouseDown event to use
mouseListener.onMouseMove = function() {
moveGlow();
};
But the glow animation restarts everytime the mouse moves. Can someone point me towards a tutorial or a tip on using a conditional to detect the mouseMove so it doesn't start over?
View 3 Replies
Sep 13, 2011
I can't seem to get around it. I whant tu add an event on mousedown on the scrollpane scrollbars..
View 3 Replies
Aug 6, 2010
I just would like to know how can I dynamically change a label's values while on mousedown.I basically have a mousedown event and I also have two labels in my application. What I would like to happen is to get the current x and y position of my mouse pointer as I move my mouse through the screen and changing the values of the labels into the values of the current x and y coordinates of the mouse pointer.
protected function object_mouseDownHandler(event:MouseEvent):void
{
curX = this.mouseX;[code]........
However, what this code does is that it records the coordinates of my mouse as it moves across the screen. What i want now to do is just to get the coordinates of the mouse while event is on mouseDown. What i'm thinking is to call the mouseDown event and ask it if the mouse is currently down, if it returns true, then i'll start recording.
View 2 Replies
Jan 26, 2009
Let's say I have 10 different buttons, a click on each button will open a different website. Currently, I have 10 different functions for 10 buttons. Is there a way to simplify the code and only have one function for all the buttons and only pass the URL to the onclick function?
button121.addEventListener(MouseEvent.CLICK, clickButton121("http://www.myurl.com"));
function clickButton121(event:MouseEvent, urlString:String):void{
myURL = new URLRequest(urlString);
navigateToURL(myURL);
}
I can say it will be very inefficient if i have 100 buttons and having to write 100 functions.
View 3 Replies
Apr 28, 2009
I have a button class which disables the current button when it is clicked, the problem is I need to restore the mouseclick event to all the other button or eventually if you work through the menu all the button will be disabled. How can I iterate through all non-clicked items and restore the clicks to the non-clicked buttons?
public function onClick(e:MouseEvent)
{
this.parent.gotoAndStop(e.target.name);
e.target.removeEventListener(MouseEvent.CLICK, onClick);
}
View 1 Replies
Dec 5, 2009
trouble to slide a mc that loads external image through a addChild function.How do I change the code in order to slide the mc that contains the new mc addChild that the loader has created?Heres my code, I have been trying to crack this for days and I couldn't seem to solve it.trying to convert myself from AS2 to AS3
Code:
var speed:Number=4;
var imageLoader:Loader;
[code].....
View 1 Replies
Oct 3, 2011
The below MouseDown() event works on for a squire area. How can trigger a MouseDown() event when clicked on a custom shape movieclip?
[Code]...
View 3 Replies
Jun 25, 2010
I created a game entirely in flash develop. It's running great and looking good. One small problem...I have to make the menu and mouseclick event for replay etc...but they game is entirely on the first frame since it was made in flash develop. as to how I can work around this? I was thinking maybe making the menu movieclips etc and incorporating timers or something of that nature. But when you load the SWF the game goes...so i'd have to pause the game too somehow while the menu is in progress.
View 1 Replies
Oct 11, 2010
When I run the file and try to shoot the zombies, none of them are clickable. I really can't tell what I have done wrong here. Here is my code:
stage.addEventListener(Event.ENTER_FRAME, moveBullseye);
function moveBullseye(event:Event) {
bullseye_mc.x=mouseX;[code].....
View 2 Replies
Dec 13, 2009
I've built my web site using the ZigoEngine (mosesupposes)... I'm also calling my images dynamically from a folder.The problem is that the following code is making a conflict with the button which swithes the next image. If i remove the code, it works. However the purpose of thezigo is completely different and I can't see the connection..
Code:
import com.mosesSupposes.fuse.*;
ZigoEngine.simpleSetup(Shortcuts, PennerEasing, Fuse, FuseFMP)
View 1 Replies
May 18, 2010
Somewhere in code i have decalred variable:
[Code]...
if I use in statement xml-child distinct of nameWin (summa, e. g.), it works good. But with nameWin, e4x compares local variable nameWin (which not interested for me at all at this time) with "necessary name" instead of compare item's nameWin with "necessary name".
View 2 Replies
Apr 11, 2011
If multiple instances of a singleton are trying to update the same property simultaneously, will there be any conflicts? How does AS3 handle the order?Flash is currently single-threaded.. will the write order be an issue when it becomes multi-threaded?
View 3 Replies
Nov 14, 2003
I'm constructing a news section for a site with 3 cycling images in a single movieclip - with the intent to have a layer of 3 buttons within that movieclip, designated to run over their respective images, triggering an html page of news - I did this, exported and uploaded to my server with no luck on the web- the links didn't work and all I got was a little hand over the images, almost as if the computer was mocking me
View 5 Replies
Apr 23, 2010
I came across the following issue:
- I am loading a particular FLA (let's call it Module1.fla) which contains a Symbol with an associtated class "FakeImage1"; the class file DOES NOT exist,s Flash creates it when compiling the FLA. This FLA has a Document Class (Module1.as), in which I instantiante FakeImage1 (which is a different asset/graphic) by calling ...new FakeImage1()
- then, I am using a custom ModuleManager to unload Module1 and load another SWF (Module2.swf/Module2.as). This one also has a FakeImage1 Symbol in it's Library and also instantiates it in the Document Class.
- now, assuming that I am correctly unloading Module1 (in my ModuleManager) before I load Module2, why is it that FakeImage1 in Module2 is instantiating the same asset that was instantiated in Module1 ?It seems that the automatically-created FakeImage1 class is still in memory (or wherever Flash puts it) when I load Module2 and therefore, my *new* asset isn't being loaded - instead, the first one is.
Note1: I DON'T want to use class/as files for my Library symbols;
Note2: of course, I could just use different class names in my modules/flas, but le'ts assume that I don't want to do that
View 1 Replies
Aug 4, 2010
I have a project where we are trying to skin Spark components from a third party library that are built up from the drawing API primitives. Our first attempt involved creating a Flex skin (SWC) in Illustrator/Flash and applying that skin to the Spark components via CSS. We found that even with only a single instance of one of the components skinned in this way on stage, the application was brought to it's knees. For example, it failed to respond in repaint scenarios in a timely manner, and exhibited all the symptoms of being hung.
Our next approach will be to recreate the same skin artifacts in MXML classes that are in turn associated with the third-party components. Although the complexity of some of the skins leads me to believe that we might not avoid performance problems with this approach either. My question is the following: Is there a correct or recommended way to apply either a SWC or based skin to a component that is built up from the Spark drawing API to begin with? Even as I ask the question I recognize that the approach means using the Spark drawing API in two places and will probably have unexpected consequences.
View 1 Replies
Nov 14, 2003
I'm constructing a news section for a site with 3 cycling images in a single movieclip - with the intent to have a layer of 3 buttons within that movieclip, designated to run over their respective images, triggering an html page of news - I did this, exported and uploaded to my server with no luck on the web- the links didn't work and all I got was a little hand over the images, almost as if the computer was mocking me.
View 5 Replies
Jun 27, 2009
Over the past years I have created many different .fla's of aircraft panels( ie. hydraulic panel, electrical panel, pressurization panel, etc.) Each .fla has only one panel in it. Each panel is a movieclip and made up of movieclips, graphics, etc. It has it's own code built in and the idea was to be able to copy the panel from the original .fla to a new .fla, that contained other panels, and together would become part of a training program for the company. No I wasn't smart enough to uniquely name each asset(switch, guage, light, etc.). I did avoid the default names like symbol1, symbol2, etc.
Now I need to take each of the panels from the individual .fla's and put them into one larger .fla to act as a single library for all the panels. This single .fla will become the master Library that I will link all future .fla's to. As you would guess I get the "One or more library items already exist in the document:" message when I try to copy and paste a panel(movieclip) into the new .fla.
Question:Is there an easy way to identify specifically which items are in conflict without having to do a direct comparison between each of the libraries?
View 5 Replies
Aug 10, 2009
i was trying to make a simple analog clock flash but when i try to make a new Date() line that pops:
**Error** C:Documents and SettingsUserLocal SettingsApplication DataMacromediaFlash enConfigurationClassesFP8TextFieldStyleShee t.as: Line 7: The name of this class, 'TextField.StyleSheet', conflicts with the name of another class that was loaded, 'TextField.StyleSheet'.{Total ActionScript Errors: 1 Reported Errors: 14 and i tried to make that the only action on a different project it still shows exactly the same thing
View 9 Replies
Feb 12, 2009
A lot of people have .com websites & put all their classes & packages inside a com folder & then their website name to avoid any possible naming conflicts when using other peoples classes - all very sensible. I have a .co.uk website however - is there an equivelant naming standard?
View 3 Replies
Jan 8, 2004
In a nutshell I'd like to be able to use the mouse to draw a box. But not draw the four sides. Instead, you could click and start dragging the mouse and a box would be drawn and grow as you drag. When you let go the box is there. But if you click and drag again somewhere else the first box disappears and the process starts over in the new mouse click position.
On the other hand, would it be better/easier/less processer intensive to just have a teeny box in a movie clip already on the screen and then have that change scale as the user clicks and drags?
Eventually this functionality would be built into a map. The map would be made up of tiles of a certain resolution. The box drawing comes in as a zoom tool. The user could click on the map, drag the mouse and draw a box. That would be the area they wanted to zoom in to. So I'm guessing I would use hitTest to find out which tiles the user drew the box on and then load higher resolution tiles.
But for now I just need to know how to get the box functionality!
View 14 Replies
Aug 5, 2009
i am working on a project in which i want to have the water ripple effect when i click the mouse where ever on the stage. so here is the problem i have created a file which produces the water ripple effect all across the stage randomly by using "flash.filters.DisplacementMapFilter " when playing the movie i want the ripples to appear on mouse down state and only one ripple not multiple ripples and exactly at the place where i click. now what i have done is i have put all the script i have in " mouseListener.onMouseDown = function() { " but what happens is the ripples appear when i click but not the whole movie clip for ripple is played its like i have to click fast after each other for the ripple to be continuous and full.what should i do?
View 1 Replies
Feb 26, 2012
So in Actionscript 3 and Javascript, to get touch events working for mobile devices I have to listen for ontouch events... However, touch events not fired on desktop. However, mouse events are triggered on both mobile AND desktop. My quesion is this: why does w3 have this spec
Wouldn't it make sense to have just to use the onmouseevent? In order to have things work on mobile and desktop I always have to listen for both events-bviously this causes issue on mobile devices because two events are fired when i press the screen (meaning that I have to do a bunch of conditional checking to add/remove event)
My initial thoughts were that multi-touch would be the main reason... But couldn't the design just have some parameter of the event like .touches? That could go along with the .pressure, .finger width, etc... maybe a .type = "touch" or .type="mouse"
View 1 Replies
Nov 26, 2004
I want to let the user control an object, in this case a cartoon character blowing a bubble. I want the user to be able to control the bubble by rapidly clicking their mouse. The faster they click the bigger it gets and when they dont click or click slowly the bubble gets smaller in size.[URL]
View 7 Replies
Apr 16, 2003
What i'd like to happen. but don't have enough actionscript knowhow.I have a series of small movies. i have made an interface with buttons. when the user presses a button one of the movies will be selected randomly and loaded into the main movie. that's it
View 4 Replies
Jan 26, 2010
I have two button instances on the stage. I've created two functions, one for each button to handle their MOUSE_DOWN event. In both of those functions I have a trace statement to ensure the MOUSE_DOWN events trigger their respective function calls, which each do.
The Problem: When you hover over either button, the button state changes to the "OVER" state as it should. However, when you click the button, the button flickers for a split second and then goes to the "DOWN" state. The flicker appears to be the button going to the "UP" state momentarily and then to the "DOWN" state. The only thing I can think of causing this problem is the fact that there is a MovieClip on the "UP" and "OVER" states that may be inheriting button events.
I've had this happen in the past when using button instances that contain MovieClips inside of them, but never knew how to remedy the problem. As a last resort I guess I could just change all the button instances to movieclips, but I'd like to learn how to accomplish this without needing to do that first.
Here is the only code that exists in the entire file:
Code:
var _volumeUpButton:SimpleButton = btn_volume_up;
var _volumeDownButton:SimpleButton = btn_volume_down;
[code]....
View 3 Replies
Nov 26, 2004
I want to let the user control an object, in this case a cartoon character blowing a bubble. I want the user to be able to control the bubble by rapidly clicking their mouse. The faster they click the bigger it gets and when they dont click or click slowly the bubble gets smaller in size.The only tutorial Ive found that is similar is this url..Anyone point me in the right direction of a tutorial closer to what im trying to do? Or can anyone suggest some action scripting to use?
View 7 Replies
