ActionScript 3.0 :: Apply Bounce To Multiple Movieclips?
Mar 21, 2011
I'm having a bit of a problem with a basic game I'm making where I want to have a number of animals which bounce around the stage.. I can't seem to get the code to apply to more than one of my movieclips using a loop.. if I try to apply vx and vy to the individual movieclips then nothing happens.. for now I have the ten movieclips on the stage but only one whichbounces around.. I have managed to get all of them to move but they each stay in their own area of the stage, but I'd like each to bounce around the stage and not interfere which the others movement.
public function Bounce() crosshairs = new Target(); addChild(crosshairs); init(); private function init():void
stage.scaleMode =
I have two MovieClips onscreen, and I want to apply the same mask to both. I set the the masks using
mc1.mask = mymask; mc2.mask = mymask;
Only mc2 receives the mask. How can I set the same mask for two different MovieClips without having to resort to putting them both in a single MovieClip?
say i have a method "btnClick", and i have 5 buttons: btn01,btn02,etc.. how do i apply this method/function to the 5 buttons through code? here is what i am trying to do(this is just pseudocode):
I need to make a little animation in Flash.So I would like to make few Swf's succeed. I found, as a start, this little piece of code in the Flashkit board. (URL...)[code]This code is ok to call many Swf's, but not to place them at a special timing. I would like to have a Timing control on them, like:Mc01.swf plays X sec, then stop. Then Mc02.swf plays X sec, then stop. Then Mc03.swf plays X sec, etc.
Currently i have 10 movieClips and named it as (dog0, dog1, dog2 ... dog9) I would like to appy a mask for these movieClips (dogs) ~~ by using ActionScript[code]...
how, to apply a property of a var to multiple vars at once. I'm making a point-n-click game where i want to apply the buttonMode property to multiple variables (of MovieClips).
I don't know if this is even possible or how simple or advanced this is, but it would be damn handy.
I have searched on Google and this site for a possible answer, with different search terms/keywords, but can't find anything close. I also tried different things with an asterisk such as *.buttonMode = true and movieClip.*.buttonMode = true but no success.
I'm trying to apply a ChangeDepths() to a bunch movieclips that I've nested inside a main movieclip which I'm using as a mask. The ChangeDepths() function worked fine when the clips were not nested, but after I placed them in a new movieclip, I get this error:
I am using CS3, AS2.I have a background image that I am allowing the user to select multiple layers over the top of (layer 1: new pattern, Layer 2: design) and the movieclips have the Blend: Overlay applied to them. My problem is when they select a second option (or a second overlay is applied to the background) the overlay shows the layer belows pattern in the new layer.My question is, is there a way to have the the two movieclips ignore each other and only apply the Blend:Overlay to the background movieclip?
im trying to use a use a code segment that makes something avoid the mouse. My issue is the code requires that iff i have more than one object that i want to avoid the mouse than i need to make a new set of variables for the second object and pretty much copy the code than change the variable names. Thats all great and dandy but i have a couple hundred very small objects that i need to avoid the mouse. is there any way to maybe apply the code to each object with an onclipload maybe?
ActionScript Code: import flash.events.Event; stage.addEventListener(Event.ENTER_FRAME, fun); function fun(event:Event) :void {
[code]....
as you can see the object i want to move requires its own variables and 2 if statements. and i REALLY dont want to have to copy/paste that code over 200 times and make a new set of variables for each object. maybe i could apply the code to the object itself ? but than what would i name the variables?
I'm kind of new to AS3 and I created a blur effect for 6 text object. I got the result I wanted, but I thought there has to be a better way of doing this. When a mouse is over a text, other texts get blur. Now, I had only 6 object what if you have 10s of objects on the stage.[code]...
Instead of applying it to just one button I want to apply it to many on the stage, how do i add the names of the buttons to the function? I tried separating with commas but no luck
I am writing a flash card game which slides the next card onto the stage when the user presses a button.There are 24 cards, and I have written a separate tween for each one... I think there is probably a more efficient way to do this. Here is what I have:
How to apply multiple filters in Adobe Pixelbender in Flash (=limited version)?
For example 3 different kinds of video displacement effects (1 displacement on the left, one on the right and one the top).I know, it possible to just copy paste the code multiple times, but this wouldn't be very elegant.
I was interested in searching through the text in a textfield and applying formatting to key words. For example, every time the word 'the' appears, apply a text format the changes it to green and 14pt.[code]...
How would I apply my existing function that involves calculating the x and y position of a specified movie clip, to multiples of movieclips. MY MOVIECLIPS on stage are
Code:
Ball_mc Ball_mc2 Ball_mc3
MY FUNCTION is
Code:
function hitDetect(event):void { var ballX:Number = (ball_mc.x-videoX)/sizeDif var ballY:Number = (ball_mc.y-videoY)/sizeDif
I'm currently working on a nav bar but I've run into a questionable situation. There are several links in the menu, and for each i'd like a mouse event on over and on out. Do I have to specify both of these events for each link, or is there an easier way to do it that I don't know about? Can you apply event listeners to multiple objects/functions?
I want to group some objects (movie clips) in a way allowing me program an event that applies to all of the objects.To be specific, I want to group some buttons in a video player. If the mouse hovers over any one of the buttons, that button's animation will jump to frame 2. How can I do this?(I figured there is probably an easier way than programming each individual button to jump to frame 2 on mouse over.)
I have a group of 16 images that I would like to load 1 of each into each movieclip. I want image1 to be inside of visual1, image 2 inside of visual2, and so on. the images are named like, 1960s_(1).png where the 1960 (year) part is coming from the rangeNum variable. The above gives me this error: 1061: Call to a possibly undefined method addChild through a reference with static type int.
completing the code to get a return value from JavaScript to flash, but all the code was in a frame. My issue is I need to apply this code to multiple buttons, and then have them navigate to the appropriate frame. I thought I could put some of the code on the buttons themselves, or possibly I could call each button and keep all the code in frame one.....the external interface call function and the button functions....btn1, btn2; etc......I am not to verse in code and need to know what and how the best way to do this would be.
I have 50 images that need to be on stage, which will be embedded into 50 different movie clips. I named the movie clips image1-image50 and the images are in an external folder named 1-50. Every freaking article or tutorial I have found clearly explains how to upload one image, or just one at a time. I can do that, and spend 2 days renaming all the functions, but I do not want to do that. Is there a better way to just load all 50 images, place them accordingly?
I have 24 movie clips on the stage: my_menu.image_holder_mc1 thru my_menu.image_holder_mc24. I want to load an image in each one. How do I identify the holder which to add a child.
The Code I have so far is....
Code: for (var i:Number=1; i<=24;i++){ var myLoader:Loader = new Loader(); myLoader.name = "image_"+i;
I've been looking for a JSFL command that might do this, but haven't come across anything even remotely similar to what I'm trying to achieve. Perhaps there is another solution besides JSFL that someone might know of.Question: Is there a way that I can select multiple symbols (either in a single frame or across multiple frames) and apply a scale transform that will adhere to each symbol's registration point?
Scenario:In an animation sequence, a movieclip of a tall rectangle is tweened on the timeline using "classic" tween. There are 20keyframes, where the mc changes position and rotation.In a duplicate of that animation sequence, I want to change the height of all instances of the mc in the animation, but keep the position and rotation. The rectangle should stay a rectangle, only shorter.I go to a keyframe, select the mc, and enter the desired scale percentage for the height in the transform pane. Then I repeat this for the other 19 keyframes. Imagine the pain and suffering I go through when this is done for several sequences!
Ideally,I would want to use the "edit multiple frame" mode in the timeline, select all instances of the mc across all 20 keyframes, and apply the height transform to all mcs via JSFL or dark magic.Flash's default behavior transforms multiple objects as a group,so not only will it squash and shear the different mc instances(creating diamonds),it will also shrink the distances between the different positions(changing the path of the tweens).I'm looking for a way to apply the transform so that each instance scales to their own registration point,preserving their position and respective of their rotation.
add some functionality to the presentation template. Currently you can only move from one page to the next. So if I want an animation on a page, no problem I'll just add a stop script at the end. No big deal. But if I want Multiple animations (just trying to replace powerpoint here) then I get into trouble.
Each page is one frame on the main timeline. Hitting left/right goes to the next frame, unless the movieclip on that frame also has additional frames. Then it should move to the next frame within that, etc.
I can't figure out that if statement though. I had another bit of script going on my first go, but ran into some issues so thought it best to create all of the scripting on the main timeline. Initially I created a boolean variable, then ran an if statement. Inside of a movieclip I switched the boolean and used the same keyboard interaction to walk through it. On the last frame of that movieclip, I switched the boolean back so the main timeline interaction kicked in again. The problem is, that's a Lot of copying and pasting of that code, and I can't figure out how to go through more than one parent. I just couldn't get it to work.
Should I just be building this thing in a Completely different way? I need to make something, so for now I'm splitting up each frame that I need different animations on and creating a different movieclip for each section. Ideally that would be contained in one movieclip's timeline. Currently one each animation's interaction will be on a timeline. So I have to duplicate the slide to add an animation. So if I have a title come in, then a pie chart, then an image, then another piece of text, I'll be stuck with 4 separate movie clips.
I want something like:if current movie clip current frame is == total frames, clicking right goes to next frame, else go to next frame of it's parent's timeline.I say the parent and not stage because the way you have to set up transitions only works within a movieclip. So you have to set up the entire slideshow within a movieclip if you want transitions between each slide. Right? I don't care about transitions for now, but will want control of those eventually.
I have 30-40 movie clips that I want to reshape. They are all identical except for color and name. Is there a batch way to duplicate the entire library but change the shape without going into each one?
