im having trouble making my hero use its jump animantion i think i got it scripted right but it sticks in it still animation?
function onEnter(e:Event):void{
dy+=gravity;
if(hero.y>300){
[Code].....
Note: I am only using the Flash animation in IE only as I created an equivalent, jQuery based animation for all other browsers (because, surprise, IE didn't handle the jQuery version).look at this in IE only.The Problemhen you hover over the dropdown menus, the Flash animation temporarily "freezes" and the continues. This causes choppy behavior in the Flash animation.
View 1 RepliesI have a character that is moving left and right across the screen. When it does there is a running animation that takes place from the idle animation to running, that part work but it does not go back to the idle animation when you release the left or right button.
View 8 Repliesi have a graphic that basically is set to pivot onto the screen using a motion tween. my problem is once the animation plays the graphic disappears whereas i would like it to remain on screen and displaying its last frame
View 2 RepliesI have 2 frames in an "enemy" movieclip, and frame 1 contains a movieclip with an idle animation, and frame 2 contains a movieclip with a throwing animation. I want it to play the throwing animation, and then go back to the idle animation. But all things I tried always make it loop. I tried around with if currentframes = totalframes and gotoAndStop etc but it doesn't want to work. I have my code in an actionscriptfile, however I also tried putting code on frames and it doesn't work.
View 3 RepliesI have a 30 second long animation (18fps). Movie symbol 135 frames long which loop 4 times using countTextField/if/else etc. and then gotoAndStop on a static frame. According to the company that are posting it on their site, the animation doesn't stop.
Are there any other ways of completely stopping an animation?
I'm working on an assignment for a Flash Game Programming class (1 of 2) where I have to take a pre-made animation, add start and stop buttons to it, and use AS3 to make those buttons work. I got the buttons on the .fla, but I'm having a heck of a time stopping the animation using the stop button (I haven't even done the start button yet). This course is an independent study so I'm not being "taught" anything by the instructor. I have to find the answers myself. I've asked said instructor, my former AS instructor, and several computer lab monitors for help and we cannot get the animation to work correctly. There are compile errors that come up that really make no sense. This is my last resort in regards to this assignment!
Assign1WalkCycle
Code:
function onTimerStart(evt:TimerEvent):void
{
play();
}
[Code]......
I really want to smooth the animation a little bit more.i want the animation to look smooth, no jumping or stopping, want continuous
View 1 RepliesBasically I have a remote with forward, play, stop, and rewind. There are 5 songs. The mc, called player is within the main timeline. First thing I want it is to load the nomusic animation... which is a mc within the player mc. then when the music loads it'll play the workign animation when the song loads.also i'm trying to avoid going to different keyframes and states. so when song 1 is played, and if the forward button is pressed i want it to go the next song. etc...
View 2 RepliesIs there a way to stop every nested mc animations as once. In other words, I would like to stop every existing playhead in my swf file with one button. Currently, I got on button stopping the main scene playhead, but it doesn't stop any nested mc animation.Here is what i got on my main scene action layer :
ActionScript Code:
_global.drapeau="1";
_global.stopPlay="play";
[code]......
I have an external .swf lib that I load using Loader class. I can get the content of it (images, text) using:
new (loader.contentLoaderInfo.applicationDomain.getDef inition(symbol) as Class)();
Then I use it to load a .swf (that I generated using Flash CS3 trial) inside that .swf lib:
var mc:MovieClip = new (loader.contentLoaderInfo.applicationDomain.getDef inition(symbol) as Class)();
I use addChild(mc) and the animation is displayed! So far so good, but the gotoAndStop, gotoAndPlay, stop and play, getting totalFrames, functions simply does not works!!!
i have a problem with a rollover animation stopping at it's 'on' state on release. i have a movie clip that fades text up from 0% at keyframe 1 to 100% at keyframe 10 and back down to 0% at keyframe 19. i have an invisible button above this with the following:
[Code]...
the visible bit is to turn off the invisible button on release. the problem is that with the following code, all that happens is the movie plays out from 11 on release. i want it to stop at keyframe 10 (where it is).
I have a problem with an animation because I want to stop the loop sound without stop the entire animation what can I do to make correctly this action please? I tried to make a movieclip to control individually of the center time line but i dont get good results.
View 4 RepliesI want it to while still easing into place like the iphone does. For example my stage is 550px. The drag and throw MC is 1650. That's 550x3. If the first image is showing starting at x axis 0 and you drag to the left it will ease into place stopping and showing the second image stopping the image at x axis 0. And the same thing scrolling to the next one and scrolling back. So the code is below and I've attached the movie that I'm working on.
[Code]....
flash pro. as 3.0.animation . almost no codes except ends of scenes having :
import flash.media.SoundMixer;
if(SoundMixer.areSoundsInaccessible() == false)
{
SoundMixer.stopAll();
}
[Code]...
i got this scene, with this specific bgm , individual frame layer. and the sounds at another layer. what i want is to stop the sound without stopping the bgm . (yes, i know the above code wouldn't work as it stops all sounds)
I am making a character walk. This code will make him wobble to the right and when thats done it will trigger him to wobble to the left and then call the function again to continue the loop.I can get the loop to work fine by calling the function but how do I STOP the function? Also I want to call it later on. Is there a way to start and stop a function?
function wobble()
{
var ws = .1;
var dis = 1;
[code]....
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 RepliesOk when you press link one it olads great! when i press link 2, it plays the closing animation, but not the entire animation, thats the problem.My closing animation is a red square going from one end to another ( for the hell of it).But you see content number two will load b4 the red square gets all the way across!!
View 2 RepliesNow I have 2 movieclip. Mc1 & mc2. I planned to to make mc2 do certain animation and user must input the key within the progress animation of the mc2 in order prevent something happen
View 1 Repliesso I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
I made an animation in Flash which I want to embed in Flex using SWFloader.
I've imported the tweener class (caurina.transitions.*) to tween a rotation. The animation runs perfectly in Flash.
However, when I embed the animation in Flex, the tweening is gone.
Do I need to import the tweener class in Flex?
I use Flash Player 10 (latest version), Flash CS4 Professional version 10.0.02, IE8 and Flex Builder 3.
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 Repliesi want to skip animation for second third etc.. load, for 15 minutes...I have flash file in AS3, but I find only code for AS2:
Code:
stop();
var today = new Date();
[code]........
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
View 2 Repliesim trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 Repliesi have a over and out animation but i only want to play the out animation when the over animation has completely finished and the same with out animation. i have this code
[Code]...
I was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 RepliesOn a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 RepliesI have an 2 animations that I need to syncronize. The first animation is a projector screen entering stage, the second is few text layers and images. I timed the second animation 2.2 sec after the screen animation starts (using timer event) and it worked. When I tested it in other computers and on the internet the screen movment was much slower so the second animation entered the stage too fast.
I want to order the second animation to enter only when the projector screen reach it's destination on stage. The screen animations has 2 parts, in animation and out animation connected by a stop(); commend in the middle.
