ActionScript 3.0 :: Turn Flash File / Project Into One Frame / Object?
Jul 29, 2011
I am creating a decision tree in flash (where someone answers questions which eventually gets them to a preferable conclusion). I have been using code snippets to link the different frames. I have created an animation that I would like to play when the user gets to the conclusion (I will use the 'click to go to frame and play' code snippet) but how can I turn the animation file into a single frame or object but still function as a animation. I tried saving as a SWF and drag into my project so it could appear as a object but it only plays in another window
View 1 Replies
Similar Posts:
Jul 29, 2011
I am creating a decision tree in flash (where someone answers questions which eventually gets them to a preferable conclusion). I have been using code snippets to link the different frames. I have created an animation that I would like to play when the user gets to the conclusion (I will use the 'click to go to frame and play' code snippet) but how can I turn the animation file into a single frame or object but still function as a animation. I tried saving as a SWF and drag into my project so it could appear as a object but it only plays in another window.
View 4 Replies
Jul 6, 2010
I'm wondering, and hoping, if I can access and use a specific instance of an object if I only have the name of the object instance in a string? The code below perhaps explains it a littler better.
[Code]...
View 2 Replies
Oct 7, 2011
I'll start off by saying I'm a newbie, just putting that out there. How do you make a turn by turn multiplayer flash game? I don't know if an engine is made in AS3, PHP, Javascript, or whatever,I made my game already, it's just that it isn'tmultiplayer yet. Basically, there are lines, and each player crosses out a number of lines, and the last player to cross out a line is the loser. I want it where one user crosses out some lines, then presses End Turn, then the other does their turn and then presses End Turn to allow the other player to move his cursor. But how can I get both players to see the same frame and only have one player have the ability to move the cursor during a turn? Is there some easily adaptable multiplayer engine for flash for newbies out there
View 2 Replies
Nov 30, 2009
I have a website that reloads same flash swf on different pages. It has music attached to the swf file. My question is how to make people turn off music on a single page and when they look at other pages, the pages remain 0 volume, and when they turn on the music on a single page, it globally turn on all other swf files music.
View 2 Replies
Apr 18, 2011
I'm trying to find out if it's possible to use a .ICO file instead of a .PNG or .JPEG file in my Flash project. Is this even possible? The reason I'm asking is that the project I'm putting together uses ActionScript 2.0 code (not sure if that makes a difference or not) and displays a bunch of images for a bunch of different applications. So instead of creating a .PNG file for each application, since I've already got .ICO files on hand, I'd rather use those (saving me a ton of time).
View 4 Replies
Jun 5, 2010
I worked in flash cs3. Have "People.swf"- library MovieClips, they have export for actionscript and first frame. Names classes "Head1"..."Head2" and so on. How i make create object "Head1" in other flash project?
View 2 Replies
Nov 30, 2006
here is the code i wish to turn the words into buttons...this code is not mine so i'm not 100% sure how to modify it to create the words to buttons.here is the code:
Code:
// register root as environment
Object.environment = this;[code]......
View 1 Replies
Apr 16, 2011
I just started an open source project @ Google Code. I came up with this simple notation for a recent project. I have since used it on several projects and am happy to share it with anyone else who might benefit. I could also use a hand with the documentation and also features if anyone is interested in helping out. Take a look and feel free to provide feedback. [URL]
View 11 Replies
Sep 10, 2009
I was working on a frame by frame scene when all of a sudden (I don't exactly remember what I did) borders show up around each brush stroke I draw like the figure shown here:
I tried turning off highlights (Ctrl + H), but the borders keep re appearing. Basically, I just want to revert back to the original selection mode as well as get rid of the borders after I draw my brushes like this figure shown below:
How do I turn off highlights / object borders permanently as well as enable regular brush selection?
View 1 Replies
Feb 8, 2011
I am pretty new to AS, and I am assuming there is a way to do this and I am just not figuring it out. Basically, I am trying to use a service that returns xml and return an Object regardless of the structure of the xml. In .Net I use the XmlSerializer.Deserialize class... is there equivalent in AS?
I was able to find SimpleXMLDecoder but I can't seem to get it to work - it also looks like it might only work with nodes? Either way, the examples out there are sparse and hard to follow, I just want to know how to take xml like this:
[Code]....
And simply turn it into an Object - is this possible without writing my own parser?
View 2 Replies
Jul 19, 2011
Iam using flash cs3 professinal. How can I import to library swc files.
View 5 Replies
Nov 18, 2010
I don't know why the swf file won't work in the flash I used loader to put the swf file into the stage but it doesn't do it.I plays fine when I just open the swf file in Flash Pro CS-4 but when I put it into a flash, it doesn't work.
View 2 Replies
Feb 9, 2011
i have a swc file i have added file to my project using [URL] how can i use this component in my flash builder project.
View 2 Replies
Mar 3, 2010
I'm using an online service (heyzap.com if anyone wanted to know) for storing small amounts of data from my Flash app. The data is sent to the server as an object, which can contain any kind of structure including arrays, numbers, strings etc. However, when the object is returned back to the app, for some reason, it has been turned into a string representation of the object. I don't think it should be like that - but it is. So if I create a textbox on screen and write the code:
myTextbox.text = receivedObject;
it shows this:
{"myArray":[{"myInteger":0,"myString":"string0","myData":[1,2,3]},
[code]....
View 2 Replies
May 17, 2010
How to embed a YouTube video file in particular place of my Flash project, should I do this in action panel or in final html file. Here is exactly what I'd like to do: On this website [URL] under 'Film' panel I have some movie samples, and after clicking buttons on right side I'd like to play embedded YouTube clips instead of flv.samples uploaded to my ftp. as it takes too long for customers to download them.
View 3 Replies
Feb 10, 2011
i have an index.fla page and will be about 10 .swf files to load into it, they will be large videos witch need pre loading. I have read lots of threads all over the place and have tryed lots of ways.The simplest way i have found so far works but gives me the error :
TypeError: Error #1006: value is not a function.
at MethodInfo-8()
after i have loaded the 1st vid intro witch then using a dispatchEvent(new Event("allDone", true));realays the info to the index file and loads the movie but the percent timer stops working and gives the error above. I have the following code
.as file
Code:
package package1
{
public class page
[code]....
View 7 Replies
Dec 3, 2010
How can I attach an AS3.0 Flash Builder 4 project to a FLA file and a document for compilation? Currently I have a AS project full of files which I can't build. What should I do?
View 2 Replies
Jul 4, 2009
I would like to add a widget board to my flash project so users can embed my project in their web page or wiget display. To see what I'm talking bout go here [URL] and click the white + mark on their widgets.If your a moderater please put this in the correct area, and consider making it a sticky so we can post new ways to impliment in different sites as they become available.
View 2 Replies
Dec 10, 2010
I just wanted to ask if I have a project created in authorware and one more in director.I just wanted to ask can we convert authorware project in flash directly or indirectly?Or can we import authorware project and/or director project in flash.does anybody know or anybody has done this b4???
View 1 Replies
Aug 17, 2011
Is it possible to load an mp3 file and then turn it into a class?[code]...
View 9 Replies
Sep 30, 2011
I have my swf, and within it is a button, when this button is clicked, would it be possible to load Notepad.exe?I am not looking to turn my swf into a projector file (think this would make it an .exe).If this is not possible from within AS3, are there any libraries anyone knows of which could handle this, or maybe even another solution to getting this done.The main thing is having an swf load a exe, not an exe loading an exe.
View 3 Replies
Jan 28, 2010
I am developing a project in Flash Builder which will load a file built by Flash CS4. The code in Flash CS4 is below, it's a doc class. I am sure the dispatchEvent has been invoked[code]...
View 1 Replies
Jul 19, 2011
This is part of my ongoing issue with 6 video files in six Scenes.I have 6 videos there were imported as enbedded, one in each scene. the first four play but the second two do not.whichever order i place the scenes, it is always the last two that pause at the first frame.o try another approach, I linked instead to a video externally. This seems to work, but, when I click a button to go to another scene the audio from the previous scene is still playing when the new video starts.
View 22 Replies
Nov 26, 2006
I have to make a project for school. It will be like a tutorial, but into an application. I already made a part of it in MXML and a bit of action script but I encountered a few problems that are over my newbie limits. So the Flex Builder 2 makes a SFW file, in the main folder of the "project". I want to make that SWF file my main executable file. I have a folder with some pics, and another folder with Action Script Files. The code lvl that I know atm is ABSOLUTE BEGINER... I don know how to make my SWF file have a specific name when I run it.Here is a picture of a training exercices that should make thing more clear:Some people told me that I should use a HexEditor and stuff. Is it ture(what u think?).
Next problem. I dont know how to make the Stage to be fix. I mean.. I dont want the stage to be resizeble. I tryed to change the stagescalemode but that wasn't it. I toke a look at the help files of Flex from the net, about the Resize action and SystemManegment, but I didn't find out what I wantend.
View 4 Replies
Jul 7, 2011
I'm making a game with Flash CS5.5 and exporting it to a APK file (AIR for Android).The trouble is that the APK file is really just a ZIP file, so you can extract the content and inside there is my game as a regular SWF file. Anyone can upload this to any website and play the game there.
I don't want the SWF file to work unless opened like it should, inside the APK file through Android.Is there any way to know through ActionScript 3 code if the SWF file has been extracted from the APK file and has been opened as a normal SWF file?
View 3 Replies
Jun 18, 2011
I have a CodeIgniter project and I made a back-office in Flex. I was wondering how I can implement the Flex project in my CodeIgniter since I'm working with routing I can't route to any directory. So there isn't a way to display the back-office.
View 1 Replies
Aug 29, 2009
How can I turn on error reporting that tells me exactly on what line of my .asc file an error or warning has occurred? I need this in order to debug why my fmscore is constantly segfaulting, presumably caused by my .asc file. I know the .asc is causing the crash because when I removed a section of it, the crash suddenly stopped - but I can't figure out why it would crash at all, and it does so at unpredictable intervals, sometimes every few hours, sometimes every single time, ..
View 1 Replies
Jun 21, 2010
I cant "center" my project, like you can see its "fixed" (yellow lines) in the left side and I cant see "invisible" part of project... (area around the project). how can I move my project so I can see the not-project area around the project. (picture 2).
At the moment situation... (cant see that area around the project)
http://img19.imageshack.us/img19/1186/68553623.png
View 2 Replies
Mar 7, 2012
I changed a layer entry of my Flash file by moving around various elements within the layer. I sitll have the original file, too. I'd like to put it back exactly like it was in the original file. How do I replace the changed sprite element from the new file with the original from the old file?
View 5 Replies
