I try to create a tab interface: So on each layer in frame 1 I added
this.stop();
but when running it says: 1180: Call to a possibly undefined method addFrameScript. main.as is currently useless but I can show it in case it would have impact:
[CODE]....
I have built a couple of sites in Flash, however, I have a problem with a current site I'm working on. My client wants various photos to fade out in a "checkerboard" fashion, which I am doing via its own movie clip and adding in the appropriate area on the main timeline. However, when I add a blank keyframe on the following page to add a new movie clip (with the next set of pictures, the timeline starts playing through the entire website, not recognizing stop actions or frame labels.
[Code]...
I'm making at quite big company presentation with slides (CS4). On some of the slides I'm using buttons with behaviors on the timeline - they are a all placed in the first frame of the related slide. I have a placed a stop(); in the first frame in every slide so I'm sure the timeline will not start playing. The problem is that it does. I runs one time and then it stops.
How can I make it stop the first time you go to the slide?
I have an animated movie clip (a man walking). I have created a tween with that clip, but when he stops at frame 30, I want the animated movie clip to stop, so it doesn't look like he's walking on the spot.
View 2 RepliesI have an internal swf file play within a main swf file. At the end of the internal swf file timeline I want the timeline of the main swf to go to a certain frame and stop.
View 3 RepliesFlash MX- I have an internal swf file play within a main swf file. At the end of the internal swf file timeline I want the timeline of the main swf to go to a certain frame and stop.
View 3 RepliesIm trying to tell my movie to goto and stop on anoter frame on my root timeline and then play a movie clip on the new frame... This is probs really simple but it is early.
[Code]...
I am currently in the middle of making a "sniping" flash game. In the first level there are a series of moving targets which are also movie clips. Inside the movie clip there is a 7 frame animation of the target exploding. Inside that is a tween of the target moving up and down. And inside that there is a plain old button.
What I want to happen is when you click on the moving target it explodes and brings you to a new frame of the main timeline. (ex. Main Timeline frame #27) But I'm pretty sure it thinks I was to play the seven frame animation of it exploding and then go to frame 27 inside the movie clip, rather then frame 27 on the main timeline.
Here's what my AS looks like on the target (ActionScript 2.0 is what I'm using.)
on (press) {
play();
}
on (release){
gotoAndStop(27)}
So how do I make it explode and then take me to frame 27 on the main timeline?
im trying to navigate through a movie clip and stop at frame labels using individual buttons to call to individual labels while being able to see the on the way to the frame(for a blurred effect).my goal is to jump from point A to point F to point Z and see all the frames in between and visa versa.
View 1 RepliesHow do I link a button thats embedded in frame 2 (music page timeline) to a frame in the main timeline ( frame 3= biography page)? Both pages are on the same scene with link buttons embedded in each page independent timeline.
View 1 RepliesIf I removeChild frame animated Movieclip, will it automatically stop running the frames inside it? Actually without calling mc.stop();
View 2 RepliesI want my MovieClip to play from frame 5 to frame 30 and then stop. How can I do this?
View 5 RepliesI'm working on a Flash CS5 file, with action script 3. I have a layer with all the audio for each frame. When I click the Next button, the audio from the last frame plays over the audio of the current frame. The only code I have in flash is:
stop()
btn2.addEventListener(MouseEvent.CLICK� forward);
function forward(event:MouseEvent) {[code].....
I just got Flash CS3. I'm trying to get my main timeline to stop in the begining, on button press to play and at the end stop again. In AS2, you would just put stop(); on the first keyframe and stop(); on the last key frame and program your buttons accordingly.
The stop(); does not work!!!! It's driving me crazy. What am I missing? I've gone through the tutorials in Flash and they don't work either.Also, if you have MovieClip that contains an animation and you don't want the movie clip to be on a continuous loop how do you stop it from playing. In AS2, I would put a stop(); on the last keyframe of the movieclip's animation. This also does not work in AS3.
my reverse button causes the timeline to ignore the stop() function on its keyframe and play backwards all the way to the start. Since it keeps trying to play the previous frame, it's frozen at frame 1.
Code:
stop()
// Reverse button //
var reverse:Boolean;
rev_btn.addEventListener( MouseEvent.MOUSE_DOWN, down );
[Code].....
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesI have added some three sound clips, play pause buttons, on the root timeline in a movie with corresponding callouts. I am able to stop all sounds on the main timeline by below
stop_btn.addEventListener(MouseEvent.CLICK, stopSound);
function stopSound(event:MouseEvent) {
SoundMixer.stopAll();
}
But now how do I resume all the sound to play. In sort, mute unmute root sounds in AS3.
I am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
I have 3 layers in the timeline, and I want to make a new layer, and then use the new layer to be my first frame (like a startpage).
View 2 RepliesHave a question about the _root.stop(). I have a pause and play feature in a flash player so the user can stop the presentation along with all the voiceover that streams with the presentation. I used the _root.stop() in the flash player hoping it will stop the main timeline, but also other embedded movieclip timelines. It stopped the main timeline, but not the other ones. How do I stop both timelines at the same time? the _root.stop() was not working for me.
View 3 RepliesThere must be an easier way to add frames at the start of a flash timeline?
I want to insert a few frames before frame one, but I can not find a simple way to do so in Flash CS5.
I have tried to use insert, it will place them to the right (frame2..). I have tried to drag all the frames of the movie over to the right, but it creates strange problems with the tweens (some even go away).
The only way I have found to do it, is create a new movie, insert frames, and then copy/paste the entire movie from the original flash in to this flash, is there a better way?
I would like to store the value from combobox or text area-MovieClip in MyClass and then I'd like to read this from another frame in *.fla file only this :) have you another code? what can I write in frame 2 Miclass and frame 3
View 1 RepliesHere i'm actually not talking about a problem but rather wanted to raise a discussion thread. (Kirupa you may also move this thread to some other more relevant section. Few of my good colleagues till prefer writing code on the Flash timeline, on the frames (code as bigh as 100-150 lines), rather than using external AS files, when rest of the world has reached to AS 3.0 which is close to Java (OOP).I'm just wanted to know the big benefit of writing the code on the frames. I know that it is highly un-manageable and I have personally faced many instances of code not initializing, or behaving strange on a frame.
View 3 RepliesI have a Flash Project that has 2 Animations in it and when I Play the movie and click the button that is specified to play the sample motion animation Both Animations Play one after another.
I am trying to use my buttons to single out each Animation and play each by ITSELF.
Can someone take a look into my file and see where I have messed up?
Here's the file: [URL]
I am new to Flash and cannot get an FLA animation to stop on the last frame. I have inserted a blank keyframe with a "stop()" command, but this command stops the animation on a blank white frame (presumably the first frame of the animation).I am working with a rebuilt FLA file (i.e., decompiled SWF file) on the latest version of Flash. In addition to Actionscript, I have tried adjusting the Publish Settings (e.g., unchecking "Loop" and setting the Flash version to 7 or 8) and editing the embed parameters (as suggested in another answer on Stack), however neither of these efforts seems to make a difference.
View 1 RepliesI created on first frame menu. On second frame there is all my game. I use button to change the frames:
button1.addEventListener(MouseEvent.MOUSE_DOWN, startGame1);
function startGame1(e:MouseEvent)
{
howManyPlayers = 1;
[Code]....
But The frame 1 is still working and I can see it. Is any possibility to:
turn off/stop the frame 1 turn off all layer?
I've a MovieClip symbol with 5 frames (let's call it the main MovieClip), each frame holds a different MovieClip symbol and each of those symbols has a small motion in them. If let's say I move to the 3rd frame in the main MovieClip: object.gotoAndStop(3);Then symbol's small motion animation, which frame 3 holds, automatically starts as I saw. So I'm thinking here do the other frames (1, 2, 4 and 5), which are not visible on stage though, are stopped and I don't need to worry about stopping each of them myself (like attaching code to each 1st frame to call .stop()) ?Because if I would now call right away object.gotoAndStop(1); it would start that frame's animation right away.
View 1 Repliesis there an action script code that enables the timeline to automatically enter a frame label on entering a certain frame.
View 1 Repliesi'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
[Code]....