I created on first frame menu. On second frame there is all my game. I use button to change the frames:
button1.addEventListener(MouseEvent.MOUSE_DOWN, startGame1);
function startGame1(e:MouseEvent)
{
howManyPlayers = 1;
[Code]....
But The frame 1 is still working and I can see it. Is any possibility to:
turn off/stop the frame 1 turn off all layer?
If I removeChild frame animated Movieclip, will it automatically stop running the frames inside it? Actually without calling mc.stop();
View 2 RepliesI want my MovieClip to play from frame 5 to frame 30 and then stop. How can I do this?
View 5 RepliesI'm working on a Flash CS5 file, with action script 3. I have a layer with all the audio for each frame. When I click the Next button, the audio from the last frame plays over the audio of the current frame. The only code I have in flash is:
stop()
btn2.addEventListener(MouseEvent.CLICK� forward);
function forward(event:MouseEvent) {[code].....
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
I have a Flash Project that has 2 Animations in it and when I Play the movie and click the button that is specified to play the sample motion animation Both Animations Play one after another.
I am trying to use my buttons to single out each Animation and play each by ITSELF.
Can someone take a look into my file and see where I have messed up?
Here's the file: [URL]
I am new to Flash and cannot get an FLA animation to stop on the last frame. I have inserted a blank keyframe with a "stop()" command, but this command stops the animation on a blank white frame (presumably the first frame of the animation).I am working with a rebuilt FLA file (i.e., decompiled SWF file) on the latest version of Flash. In addition to Actionscript, I have tried adjusting the Publish Settings (e.g., unchecking "Loop" and setting the Flash version to 7 or 8) and editing the embed parameters (as suggested in another answer on Stack), however neither of these efforts seems to make a difference.
View 1 RepliesI've a MovieClip symbol with 5 frames (let's call it the main MovieClip), each frame holds a different MovieClip symbol and each of those symbols has a small motion in them. If let's say I move to the 3rd frame in the main MovieClip: object.gotoAndStop(3);Then symbol's small motion animation, which frame 3 holds, automatically starts as I saw. So I'm thinking here do the other frames (1, 2, 4 and 5), which are not visible on stage though, are stopped and I don't need to worry about stopping each of them myself (like attaching code to each 1st frame to call .stop()) ?Because if I would now call right away object.gotoAndStop(1); it would start that frame's animation right away.
View 1 RepliesI try to create a tab interface: So on each layer in frame 1 I added
this.stop();
but when running it says: 1180: Call to a possibly undefined method addFrameScript. main.as is currently useless but I can show it in case it would have impact:
[CODE]....
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Repliesi'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 RepliesI have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 Repliesat the moment i have tried using booleans but this is making my code have many errors so i was wondering if there was another easier way?
View 1 RepliesI am working with Flash MX and have a banner which is looping 3 times and then stops on the last frame. I have that working fine, but I have added a "wipe out" at the end and need the movie to stop on frame 164 instead of the last frame now.
View 14 RepliesI have 5 frames in which a different song will be playing, this is the code i used on each frame:
var mySound:Sound = new Sound();mySound.load(new URLRequest("frameone.mp3"));mySound.play();
If im on frame 1 and click on the navigation button to see frame 2, both songs on these frames play simultaniously. how can i stop the background song on frame 1, and have frame 2 playing?
why my "nieuws.swf' is not going to frame 2 or not showing at all when i press the button with the second piece of code on it? The nieuws.swf has a stop on frame 1 and on frame 2. I can see it right away when i take away the first stop. I use the function playNieuws, to make it all happen.
[Code]....
1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage
this.movieClip.gotoAndPlay("2"); //NOT WORK
this.movieClip.gotoAndPlay(2); //NOT WORK
[code].....
Using MX 2004. I would like to play the entire movie twice, then start playing a third time until frame 30 and stop.
View 1 Repliesat first, I thought I could manage this myself searching the forums about "preloader" but none of the solutions seem to work. I think it has to do with the fact that I'm using the FLVPlayer with an external file. What am I looking for?
1. Well, the preload code for frame 1 that makes sure the external F4V (movie.f4v in the same dir) is loaded 100% before it jumps to frame 2 where the movie should start playing...
2. If possible, a progress bar.
I did a MC called "bgproducts" on the root frame no:46 to 59 then stop(); and in this MC, you have an animation and stop at frame no :64 then stop(); in the frame 64, i have another an empty MC called "productsMC". when i do this code in bgproduct frame no 64 : productsMC.loadMovie("main.swf", ""); it plays the frame on the root 46 to 59 non-stop and nothing to loadmovie, and also the main.swf has a preoloader then frame 2 an load from xml file.
View 2 RepliesI've put together a small website and have managed to teach myself quite a bit but there is one thing that I can't seem to find any info on,on the second page of the site I have a video, which progressively loads into the page, however I would like to make the video stop playing when you go to any of the other pages of the site. I'm sure this is a pretty straight forward piece of code but I can't work it out myself.This is the code I use to start my video playing.....
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
[code].....
I'm busy building a website in Flash AS3. I tried to create the same effect as [URL] (click on enter site) But my file is scrolling too far. So far that there's white. You also can drag it with your mouse to get the white background. And that's not what I want. Maybe I have to set a limit for scrolling or a stop() somewhere in a frame.. I only don't know where and how, and how to search google for tutorials.. This is a link to my file: [URL] And this is my AS3 Code:
[Code]....
I have a FLV video that I need to stop when my flash video reaches a certain frame. I named my video "SMB3video". Using AS3. I don't want something super advanced, just keep it as simple as possible. I tried to create a script which gave me no errors until it reached the frame for the timeline.
Code:
this.addEventListener(Event.ENTER_FRAME,ent_frame);
function ent_frame() {
SMB3video.stop();
}
wondering if this is possible. I have a button and want it to play from let's say frame 10 to frame 15I'm starting with this:
on (release) {
//Movieclip GotoAndPlay Behavior
this.gotoAndPlay(10);
[code].......
I have built a couple of sites in Flash, however, I have a problem with a current site I'm working on. My client wants various photos to fade out in a "checkerboard" fashion, which I am doing via its own movie clip and adding in the appropriate area on the main timeline. However, when I add a blank keyframe on the following page to add a new movie clip (with the next set of pictures, the timeline starts playing through the entire website, not recognizing stop actions or frame labels.
[Code]...
If you push the right button (yes I know that the buttons should switch place) it plays to frame 25, if you push it again, it will go forward to frame 50 and so on. It's 25 frames between every stop. The whole thing is 100 frames and when you're at frame 100 you comes back to frame 1 again. Problem: If I want to reverse this, example: when I'm at frame 50 and push the other button i want to go from frame 50 > frame 25 and it will stop there.
View 14 RepliesI have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
[Code]...
I'm trying to get a symbol to play on mouseover and stay on the last frame right at the end of the animation. 1. Made a new doc. 2. Drew a small circle. 3. Turned circle into Movie clip and named it 'circle'. 4. Double clicked on it to edit inside the symbol. 5. Made a keyframe on frame 12. 6. Did a shape tween. 7. Enlarged the shape on frame 12. 8. Made new layer on top and put down stop(); at frame 12 AS3.0. 9. Went back out to main scene. 10. Made new layer on top. 11. Selected first frame and put this down in AS3.0: circle.addEventListener(MouseEvent.MOUSE_OVER,zoom); function zoom(event:MouseEvent):void {circle.gotoAndPlay(1);} 12. Left it to test. Everything runs fine except that when I scroll over the circle the animation plays out but returns to the first frame. I need it to play till the last frame and stay there.
View 5 RepliesI'm trying to get a movie to stop playing when I click on a button (the second frame button) that brings me to another frame (frame 2). I created on frame 1 a video gallery and I would like to create another one in frame 2. Each frame has its own player. My question is while a movie is playing in frame 1 and I go to frame 2, the the new video gallery shows but the movie from frame 1 keeps playing. I would like to have player in frame 1 stop when it hears the button for frame 2 clicked.
View 3 Replieshave a xml gallery on one frame and when i click on another frame the frames content appears but the xml gallery is still running on top, find a why how to stop the xml gallery running before going on another pagethe code i used for the gallery is as below:
var xml:XML = new XML();
var img_count:uint;
var loader:URLLoader = new URLLoader();
[code].....