I have a button, and i have an image (converted to a movieclip)The effect i want to achieve is for when someone hovers over the button (not the MC) the image (MC) expands from the button, then when the mouse is taken off the button, the image retracts and then vanishes.
View 2 RepliesI imported a image file and made it into a button. So in flash8, is there any way to add an actionscript or anything to make the image transparent when I mouseover the button?
View 1 RepliesI have a basic mouseover in my flex application which changes an image onmouseover and changes it back onmouseout using the code mouse Over "functionToChangeImageSource()" and another one to mouseout.It works fine when you slowly mouse over and out, however if I quickly move the mouse over it, it occasionally stays on the mouseover image and the mouseout function doesnt appear to kick in. Is there anything I can do to fix this, or does anyone have any ideas why its happening?Also, I've tried the rollOver and rollOut instead but it has the same problem.[code]I'd imagine you're correct about the mouseover event not completing before mouseout is but how to I fix this?
View 3 RepliesI created a simple mouseover (like this one http:url... )with one small image that grows to a LARGER image directly on top of the smaller image when mouse is OVER the smaller image. When user mouses OVER the smaller image the larger image appears correctly.Problem is that even when user mouses OVER the "boundries" of where the LARGER image WILL appear, that also causes larger image to appear. What I want is for the larger image to appear ONLY when mouse is OVER the smaller image.
View 2 RepliesI have collection of images getting from xml. That images placed in tilelist, i need zooming while mouseover which one image.
View 2 RepliesI have imported a bunch of images from photoshop and I want the images to act as links -- similar to an image-map. Is there a way to have a mouseover apply only to an image within a movieclip instead of the entire movieclip? For example -- lets say I have a 45 degree line contained in a movieclip... I only want the line to receive mouseover events and not the whitespace of the bounding movieclip.
View 1 RepliesI'm a Web designer from London and although I have good Photoshop skills, I can't put together my designs for animation
Description:
I would like to know how I can make an image invisible until I hover the mouse over it. Once the image becomes visible how can I make an image behind it (on a different layer) rotate until I move the mouse away.
1. How do I make image invisible until I hover mouse over it?
2. Once image is displayed how do I make an image rotate 90 degrees behind it?
3. Once I move the mouse off, how do I make the button become invisible again, and the rotated image to be restored to it's original rotation.
I am using Flash / Photoshop (CS5)
I have built an dynamic XML image scroller to load jpgs via an XML file and then populate a horizontal scroller with a mouseover effect and a mouseclick function that sends you to another url.Right now the mouseover function fades the image alpha, but I want it to also add a text label dynamically grabbed from the XML file.Here is the code for the mouseover function:
Code:
function overScrollerItem(e:MouseEvent):void {
Tweener.addTween(e.currentTarget, { alpha: .5, time: 1 } );
[code].....
I'm working on an image gallery using a mouseOver to scroll the thumbnails. How can I limit the area affected by the mouseOver as at the moment it scrolls wherever the cursor is on the page.
View 2 RepliesI want to do a image slide show using flash MX. I need a help I Just the image to scroll, But i don't know
1. how to stop the Image scrolling on Mouseover.
2. On clicking on a particular image a new webpage must be displayed.
3. how to made a multiple images to scroll one by one
just been trying to fade one image into another on mouse over. found a .fla template which does it for me and have applied my images to it. works how i want it to - image 1 fades into image 2 on mouse over, then goes back to image 1 when mouse moves off BUT the problem is that when the mouse is over the image and it fades into image 2 it begins to flicker - see for yourself in the .fla file here - [URL] i think this is all of the code from the different layers
[Code]...
I am trying to create a horizontal scrolling background image with mouseover. A post a while back seems to have all the details.
[URL]
Everything in the file that was attached at that post seems to work exactly, how I want it to, however I don't understand how to make it work with my own imagery. There are 3 movie symbols and I am not sure how to create the symbols so they work properly with my own images.
This shoud be relitively easy but for some reason I am having difficulties.
I've done my fair bit of HTML coding and work fairly well with CSS but i've never ever done a mouseover in flash.. Now, the website's text, all of it, is simply located on a text.txt file that the flash file reads and incorporates onto the website.. All text and images come from this text file. This is what I want to do.
Click on Enter site, then when it loads, click on the "Selling" tab at the top of the site. On the "My Listings" section is where I want to have the mouseover text and the "Market Analytics" section (which we'll be renaming) is where we'd like the image to actually appear. My question to you is can this be done within this environment and how so?
I can edit JavaScript somewhat, though its been a while.
1) if I create items in a for loop, is correct to add a new eventListener for each item ? Or should I add only 1 eventListener to the parent ? and call the event through ID ? 2) if I want to scale my item, (a LinkButton with icon image), I noticed that the icon is sometimes resized with delay, so I have a bit of flickering when I trigger the event. Should I not use icons, and set the image in another way ? How can I fix this?
View 1 RepliesI am trying to make an image gallery with pan and zoom effect on mouse over. Now what I want is exactly like this website [URL].
View 2 RepliesI have a button on the second frame of a movie clip. When the user mouses off it, the timeline goes to the first frame of the movie clip. I want a button on top of it that can be clicked by the user for a getURL function. But when the user mouses over the button on top, it registers as rolling off the original button. Is there a way to have the user mouse over the getURL button on top without going back to the first frame? The problem is that the getURL button is in its own movie clip along with other content in a popup menu so that I can make it scrollable, and when the user mouses over this movie clip / button then the rollOut function is activated on the original button.
I've attached a simplified version of what I'm looking at, to show you the problem I have with mousing over the getURL button.
I want to create a menusystem that bases only on mouse over functions. Tough there is one thing that might become quite frustrating for the user and that is small by mistake mouseovers that brings them to another page.So what I want to create is buttons with a delay of lets say 200ms. 200ms that the user has to have her or his mouse over the button to activate it.But I have run into some problems, and after a lot of googling the only result I got is menu-buttons that are activated directly on mouse over, but does not act out the manuver until the delay is over.So the user could practicly have his mouse in china when the button is activated. Which is not the result I want.I want a button that is activated after that the mouse has spent 200ms on the button.This is the failed direct reaction Actionscript 2.0 of the button I got at the moment.
Code:
on (rollOver) {
timer = setInterval(goto, 200);
[code].....
i know it must a be very eaaaaaasy one, but believe me i tried: with TweenLite, with code, searches, to no avail. What i want to do is very simple: i have a clip_mc that sits there and waits for two buttons (toLeft_mc and toRight_mc) to be hovered and when hovered, clip_mc moves to the left and to the right by increment of 1px.
[Code]...
I'm trying to achieve something quite specific. I have a few transparent PNGs that will be dynamically generated and will be arbitrary shapes. I want these to form a sort of "hotspot" on mouseover, but I obviously don't want the mouseover to comprise the transparent bit - simplest analogy I can think of a is a single jigsaw puzzle piece.Is there any way to do this in AS3? Would I just load the PNG and flash automatically discards the transparent pixels?
If not the PNG, I can get the "jigsaw piece" in raw RGB pixel values as an XML doc. Could I maybe use the bitmap class to "populate" a bitmap using these raw values which I can then use as a movieclip with button enabled?
edit: from reading around elsewhere, a "map" analogy seems far more apt.
i have once again resorted to asking the pros on how to accomplish something. I am trying to use a UIloader laid up next to itself and use a different image each time. I have also tried to add a roll over too. I have figured out how to use arrays (i have only got one item in my array currently) but cant get them to work within a source file path.
[Code]....
I've got a line of text, set as a button, that triggers an image and some text to show up further down the page when a user hovers over the text. However, when the mouse passes over the text/images at the bottom of the page (that should only come up when the text is in an 'over' state), that 'button' section all triggers. How do I make it so that only the text initiates the button 'down' state?
View 2 RepliesI've got a menu with 3 menu items. Each item is a mc. There is a pointer mc that eases to the mc menu item that you mouseover. That was working fine...until I found out that I have to make the menu dumb enough for flash 5. As we know, you can't assign button events to mc's unless using flashplayer 6 or higher. So I tried to just drop some invisible buttons over my menu item mc's and assign the mouseover events to call the prototype in each invisible button. The prototype should then ease the pointer mc to the position of the menu item that I've moused over. Problem is that it restarts the playhead back to frame 1 each time I mouse over a button.
View 7 RepliesI have a simple movie clip for which i bind two events 1-MouseOver and MouseOut
in these events i am just tracing simple text
But the Problem is when i take my mouse over the movie clip both events called tracing the string in the output panel
Infact, things should be done like that on mouse over, its text is printed and when i take my mouse away[out] from the movieClip MouseOut event should be called.
ActionScript Code:
import fl.motion.Color;
import flash.display.MovieClip;
[Code]....
Here are the two texts
Products
Innovation
I want the button to be "products" and when you mouse over it products fades out and innovation fades in and moves to the top right, like an animation.
Its been a while since i used flash and i need some action script for my latest project. On my button i want: aboutUs_mc to play when mouseover aboutUs2_mc to play when mousedown i also dont want either to play until both the mouseover and mousedown happens. i also dont want them movieclips looped.
View 3 RepliesRef: spark.components.ButtonBar. In the spark ButtonBar's mouseOver event, how do you determine which of the several buttons the mouse is hovering over? There is, of course, no selected index at this juncture. If it makes a difference, my ButtonBar is not defined in MXML but is instantiated in ActionScript and an ArrayList is assigned to the dataProvider property of my ButtonBar instance.
View 2 Replieshow can I make the mouseover effect only on my button[code]
View 6 RepliesHow do you disable only the MOUSE_OVER event for a an instance of the Button class in AS 3?
MyButton.Mouse_OVER = null ;
Will not work as it is not a writable property.
MyButton.enabled = false
Will not work as that disables the entire Button and that is not what I want.
how I can keep my cursor an arrow when I mouseOver a button or mc, instead of it changing into a hand.
View 4 RepliesI'm trying to code a click-and-point adventure game for a class, in which interactive objects glow when you mouse over them.... In the frame I have the background image (in which there is, say, a drawer), and an image of the drawer glowing placed exactly over top of that. The glow image is invisible until you mouse over it, at which point it is supposed to become visible (and disappear upon mouseout). I have the mouseover function linked to the entire glow image (which is a movieclip), but it only seems to work when you mouseover a specific portion of the image (usually a corner). The code looks something like this:
ActionScript Code:
DeskDrawer.addEventListener(MouseEvent.MOUSE_OVER, drawerLightUp);
function drawerLightUp(e:MouseEvent){
DeskDrawer.alpha = 100;
}
when the glow-image is moused over, it moves upward slightly and a small amount of whitespace appears at the top of the image.