i know it must a be very eaaaaaasy one, but believe me i tried: with TweenLite, with code, searches, to no avail. What i want to do is very simple: i have a clip_mc that sits there and waits for two buttons (toLeft_mc and toRight_mc) to be hovered and when hovered, clip_mc moves to the left and to the right by increment of 1px.
[Code]...
I am making a menu that consists of 6 different rollover buttons, these3 buttons sit on a path where the graphics look like a road. What I need to do is have an mc of a car that moves along the road. When the car is at button 1, and you mouseover button 2, the car moves towards button 2, then when you mouseover button 3, the car moves towards button 3 etc., all while the car stays on the road (path) that it sits on - so not like a mouse follow but constrained to the path. I also need the car to go in reverse, so if the car is at button 4, and you mouseover button 3, the car will move towards it.
View 3 RepliesI know I am a new member but hopefully my question won't be overlooked because of this fact. Anyway, here goes. I have a new project, a flash intro, and my client wants to be able to wipe away sand particles to reveal an enter website button. I tried an simple method of wiping away a image layer like an eraser but they want it to look like actual sand particles are moving around.
View 9 RepliesI am making a menu that consists of 6 different rollover buttons, these3 buttons sit on a path where the graphics look like a road.What I need to do is have an mc of a car that moves along the road.
When the car is at button 1, and you mouseover button 2, the car moves towards button 2, then when you mouseover button 3, the car moves towards button 3 etc... all while the car stays on the road (path) that it sits on - so not like a mouse follow but constrained to the path...I also need the car to go in reverse, so if the car is at button 4, and you mouseover button 3, the car will move towards it.
I've got arrow buttons and a movie clip on my stage. I have an event listener for each arrow button for a MOUSE_OVER event that calls a handler function in my movie clip. The handler functions just call prevFrame(); or nextFrame(); What I want to happen is that the movie clip continues to play forward or backward as long as the mouse is over the appropriate arrow button.
Stage Code:
leftArrow.addEventListener(MouseEvent.MOUSE_OVER, imgBar.goLeft);
rightArrow.addEventListener(MouseEvent.MOUSE_OVER, imgBar.goRight);
Movie Clip Code:
function goRight(event:MouseEvent):void{
this.nextFrame();
}
[code]....
I'm not sure if MOUSE_OVER is the correct way to do this if I want the function to continue as the mouse even only happens once.
I have six images on a frame as buttons with rollovers making them expand on the button frames. The issue is when the mouse goes over they only expand over the other buttons they are above stackingwise in that layer. I really was hoping to create just a simple bit of code, but it seems that things like containers and children are all needed?[code]The little line of code was my most recent attempt but it pulled up an error about things I have no clue on (1118). Is there a simple code to move the current button on top with out having to say "forget AS3!" and just make a 5 frame webpage a 60 frame one? what is the best format to import videos into a flash project? I went with a swf version, but I was not sure if the mov or other formats would be better.
View 7 RepliesI have a basic mouseover in my flex application which changes an image onmouseover and changes it back onmouseout using the code mouse Over "functionToChangeImageSource()" and another one to mouseout.It works fine when you slowly mouse over and out, however if I quickly move the mouse over it, it occasionally stays on the mouseover image and the mouseout function doesnt appear to kick in. Is there anything I can do to fix this, or does anyone have any ideas why its happening?Also, I've tried the rollOver and rollOut instead but it has the same problem.[code]I'd imagine you're correct about the mouseover event not completing before mouseout is but how to I fix this?
View 3 RepliesI have a button on the second frame of a movie clip. When the user mouses off it, the timeline goes to the first frame of the movie clip. I want a button on top of it that can be clicked by the user for a getURL function. But when the user mouses over the button on top, it registers as rolling off the original button. Is there a way to have the user mouse over the getURL button on top without going back to the first frame? The problem is that the getURL button is in its own movie clip along with other content in a popup menu so that I can make it scrollable, and when the user mouses over this movie clip / button then the rollOut function is activated on the original button.
I've attached a simplified version of what I'm looking at, to show you the problem I have with mousing over the getURL button.
I want to create a menusystem that bases only on mouse over functions. Tough there is one thing that might become quite frustrating for the user and that is small by mistake mouseovers that brings them to another page.So what I want to create is buttons with a delay of lets say 200ms. 200ms that the user has to have her or his mouse over the button to activate it.But I have run into some problems, and after a lot of googling the only result I got is menu-buttons that are activated directly on mouse over, but does not act out the manuver until the delay is over.So the user could practicly have his mouse in china when the button is activated. Which is not the result I want.I want a button that is activated after that the mouse has spent 200ms on the button.This is the failed direct reaction Actionscript 2.0 of the button I got at the moment.
Code:
on (rollOver) {
timer = setInterval(goto, 200);
[code].....
I'm trying to achieve something quite specific. I have a few transparent PNGs that will be dynamically generated and will be arbitrary shapes. I want these to form a sort of "hotspot" on mouseover, but I obviously don't want the mouseover to comprise the transparent bit - simplest analogy I can think of a is a single jigsaw puzzle piece.Is there any way to do this in AS3? Would I just load the PNG and flash automatically discards the transparent pixels?
If not the PNG, I can get the "jigsaw piece" in raw RGB pixel values as an XML doc. Could I maybe use the bitmap class to "populate" a bitmap using these raw values which I can then use as a movieclip with button enabled?
edit: from reading around elsewhere, a "map" analogy seems far more apt.
i have once again resorted to asking the pros on how to accomplish something. I am trying to use a UIloader laid up next to itself and use a different image each time. I have also tried to add a roll over too. I have figured out how to use arrays (i have only got one item in my array currently) but cant get them to work within a source file path.
[Code]....
I've got a line of text, set as a button, that triggers an image and some text to show up further down the page when a user hovers over the text. However, when the mouse passes over the text/images at the bottom of the page (that should only come up when the text is in an 'over' state), that 'button' section all triggers. How do I make it so that only the text initiates the button 'down' state?
View 2 RepliesI've got a menu with 3 menu items. Each item is a mc. There is a pointer mc that eases to the mc menu item that you mouseover. That was working fine...until I found out that I have to make the menu dumb enough for flash 5. As we know, you can't assign button events to mc's unless using flashplayer 6 or higher. So I tried to just drop some invisible buttons over my menu item mc's and assign the mouseover events to call the prototype in each invisible button. The prototype should then ease the pointer mc to the position of the menu item that I've moused over. Problem is that it restarts the playhead back to frame 1 each time I mouse over a button.
View 7 RepliesI have a simple movie clip for which i bind two events 1-MouseOver and MouseOut
in these events i am just tracing simple text
But the Problem is when i take my mouse over the movie clip both events called tracing the string in the output panel
Infact, things should be done like that on mouse over, its text is printed and when i take my mouse away[out] from the movieClip MouseOut event should be called.
ActionScript Code:
import fl.motion.Color;
import flash.display.MovieClip;
[Code]....
Here are the two texts
Products
Innovation
I want the button to be "products" and when you mouse over it products fades out and innovation fades in and moves to the top right, like an animation.
I have a button, and i have an image (converted to a movieclip)The effect i want to achieve is for when someone hovers over the button (not the MC) the image (MC) expands from the button, then when the mouse is taken off the button, the image retracts and then vanishes.
View 2 RepliesIts been a while since i used flash and i need some action script for my latest project. On my button i want: aboutUs_mc to play when mouseover aboutUs2_mc to play when mousedown i also dont want either to play until both the mouseover and mousedown happens. i also dont want them movieclips looped.
View 3 RepliesRef: spark.components.ButtonBar. In the spark ButtonBar's mouseOver event, how do you determine which of the several buttons the mouse is hovering over? There is, of course, no selected index at this juncture. If it makes a difference, my ButtonBar is not defined in MXML but is instantiated in ActionScript and an ArrayList is assigned to the dataProvider property of my ButtonBar instance.
View 2 Replieshow can I make the mouseover effect only on my button[code]
View 6 RepliesHow do you disable only the MOUSE_OVER event for a an instance of the Button class in AS 3?
MyButton.Mouse_OVER = null ;
Will not work as it is not a writable property.
MyButton.enabled = false
Will not work as that disables the entire Button and that is not what I want.
how I can keep my cursor an arrow when I mouseOver a button or mc, instead of it changing into a hand.
View 4 RepliesI've got the following movie online to look at:(disregard background, temporary image)URL...I have 3 icons (will be 4, the photos at the bottom of the movie).When hovering over a button, it should rise up around 50px, and on mouse out, it should drop back down to its original position.If you look at the movie, it does that, however, if you move around the images a bit you'll see that at some points it picks up 2 photos/buttons at a time (since they're overlapping a bit I imagine), but the BIG problem is that sometimes, when picking up both images, they do not return to their original position when mousing OUT as they should, they remain suspended as if they are stuck at the end of the onmouseover function and can't come back down.[code]
View 2 RepliesI imported a image file and made it into a button. So in flash8, is there any way to add an actionscript or anything to make the image transparent when I mouseover the button?
View 1 RepliesI have a png image which has been converted to an MS and used as a button. When I mouse over the button, I _xscale and _yscale it so that it's smaller and on roll out the opposite needs to happen. However, when I move my mouse just over the edge of the button the xscale and yscale vibrate erratically and I am not sure what is causing this. I have already put a transparent vector rectangle behind the image thinking this will sort out the problem but it seem it still happens.
View 1 RepliesI am working on a simple flash project. In Scene 1 I have a large image above and a long scrolling image below which is a movieclip called image_slider. The Scrolling is set with actionscript 3.0 mouse over event listener. When the user moves the mouse right image_slider moves left, when mouse is left it moves right. It works very nicely. Now I wanted different parts of image_slider to change the large image above when they are clicked.
So I decided to do these actions as part of the image_slider movieclip. So I have added transparent buttons to the image_slider movie clip and added event listeners for them and functions to gotoandstop at different frames in Scene1. This works well.
My problem is that now the image_slider no longer moves freely. It does move, but as you can see it if your mouse stops moving the scrolling will stop at the next button. You have to move the mouse again to make it keep scrolling. I don't know why it has decided to do this. how to stop it from stopping at each button edge?
You can see the flash movie at [URL]
I am trying to get when a user mouses over the button some content shows up and moves with the mouse until that user moves off the button..does anyone know how i can acheive this...
View 13 Replieshow to write a actionscript code for a button when the button is clicked it should move to the nextframe.
// About and smile1 button scripts
stop();
_root.smile1.onPress = function() {
if (mouse_over_smile1) {
[code]....
i have given 3 functions as onEnterFrame,onPress,onRelease. i tried all these but didnt get the result.smile1,smile2,smile3 are button instances which are declared on the monie clip.my main thing is i hav a button, when i click on that button it should go the next frame which i have declared in "gotoAndPlay(6)" method.
I am having problem with a getProperty thing. I have built a menu system that I want a bar to move over the button when the user rolls over the button. I have 3 buttons which have the following code on them:
on (rollOver, dragOver) {
/:Ymove = -119;
}
on (rollOut, dragOut) {
/:Ymove = /:origYpos;
}
and then I have an mc called bar which is within an mc called subMenu, which is within an mc called intro, which is on the stage. I have the following code on the same mc as buttons and bar, on first keyframe:
[Code]...
im new to actionscript 3. I have some problems in creating mouseover scroll. wat i want to do is to scroll the text (which was created as movie clip) when i mouse over on the button. and stop the scrolling when i mouse out. thou i have some examples on how to make it work with actionscript 1 and 2, i dunno how to change it to actionscript 3.
View 5 RepliesI would like to move a Mc with 2 buttons without having to simulate the actual movement inside the movieclip.
I have managed to move the clip with the arrow keys with this script:
onClipEvent (load) {
// declare and set speed variable
speed = 5;
}
[Code]....