I need to loop a flv file in flash if a condition is true.
So I tryed to add a listener but id doesn't work.. Code below:
textBox.addEventListener(FocusEvent.FOCUS_IN, focusInListener);
var connection:NetConnection = new NetConnection();
var stream:NetStream;
var video:
Video = new Video(200, 200);
var metaObj:Object = new Object();
[Code]...
I know how to do this in other codes, but..if (condition1=true) AND (condition2=true) then... How do you do this in AS?
View 5 RepliesIf i have a piece o code that i would only like to tell Flash to use when a condtion is true how do i do that?Example of my code now:
aa = 1+Math.floor(Math.random()*5);
bb = 1+Math.floor(Math.random()*2);
if (aa == 1 && bb == 1) {
[code]......
I'd simply like to load an mc from my library if my condition is true:
if (condition != false){
insert movieClip here
}
How do I exit a script in case a condition is f.ex. true ? Let's say I have following script:
on (release) {
if (!psw2_fla) {
inf= "Insert password !" ;[code]......
Is it possible to use a for loop within an if condtional statement? I have been trying but just get errors no matter what I do. I have a series of buttons that pop up in a window and I want to make it so a click anywhere outside of the buttons will close the pop up window. I have been doing this by running a hitTest that checks if any of the buttons are being touched one at a time. It works, but it seems overly tedious, especially since there are a lot of buttons. I do not want to put the hitTest on the background of the window because it will cause the mouse cursor to turn into a hand even when it is not over one of the actual buttons.
If the for loop can't be within an if condition, then maybe there is a better way to use the hitTest code, but I couldn't figure that out either. Here's a simplified version of what I have now (it works, but is too much code..):
[Code]....
Just wondering...s it possible to create a while() loop with as condition comparing a value against all items in array?e.g.
ActionScript Code:
while(myValue == for each(var i in myArray)) {
//Do Something
[code]........
i tried to use setInterval() and Timer function, but it doesn't work
Code:
for(i:Number=0; i<100; i++){
if(i%2 ==0 ){
trace("--------");
[code]....
I have a loop in a function which condition depends on some variables a,b,c and d. I would like to change that condition depending on where the function is called from. Would it be possible to assign those conditions to a variable (string maybe)?
Like this
function varcon():void{
while (conditionVar){
a=...
[Code]....
I'm wrestling with an issue right now and I'm hoping for some help, and more so, I'm hoping I can explain my problem. With the thought of a "fill in the blank/drag and drop/string replacement" interaction, here's how my swf works:
I have a various movie clips that can be dropped on various movie clips.When one movie clip is dropped on another, the corresponding __#__ within myTitle.text will be replaced with a string that is related to the movie clip that was just dropped: i.e. myTitle.text becomes 'This is the most annoying [thing]...'Per that example I just mentioned, in the code below, my for loop searches for __1__ and moves the hTarg movie clips accordingly.Once a __1__ is replaced with the associated string I mentioned, the indexOf the __1__ becomes null because it no longer exists in the string, and the following startRect(s) below also become null.
So, my question is: How do I continue to loop through my for loop if the first index is null? I hope this makes sense, and I'm hoping someone can ituit what I'm trying to do based of my lousy explanation. If more clarification is needed, let me know and I will do my best to further explain.
[Code]...
How to initialize and make condition for 2 variables in single for loop in Flex let keep i and j are two variables
View 2 RepliesI have the following embedded flash code:
<object width="647" height="483" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0">
<param name="salign" value="lt" />
<param name="quality" value="high" />
[code]....
I've been trying to get it to loop after it finishes playing, but it doesn't seem to work even with the "loop" parameter set to "true." I read online that there may be something with the flash file (exporting from the original .fla), but this is actually a .flv file that I imported into Flash, and exported as an .swf file.
I want to leave the for each loop as soon as the boolean is set to true.
[code]...
I've tried break and such, but this all doesn't work.
I am making a little flash animation, and for this one scene, I need an animation to loop over and over, while a soundtrack plays underneath.
My sound file is 867 frames long. My animation is 20. I want the animation to loop every 20 frames, and the sound to loop every 867. I tried with making the animation loop by itself, and it started the sound from the beginning every 20 frames. While the sound beneath it was still playing.
In other words, is there a way so that a sound layer is not affected by the looping of the animation?
I have an array. I have a button, when I press on it I want to be able to loop through every item in the array and see if EVERY item is equal to true, if so I want something to happen.
var allIsTrue = false;
_global.myArray = [false, true, false, true, false, true, false, false, false, false, false, false, false,false,false,true]
///would not do something
[Code].....
I thought I could loop through each one and if a false statement if found, the loop stops and the variable allIsTrue = false. But if the loop cycles all the way through allIsTrue = true.
I have a swf within a html page. There is a function that opens an html page when an object gets to a certain x position. However, when the object gets to that point the new html page (in _self) opens over and over again and get stuck in a loop. Any way to escape this loop and what would be the best way to trigger this new html page to open when the x position of the object is true?
View 1 Repliesdoes setting the fixed property of a Vector to true before entering a loop is better for performance?
View 6 Repliesabout.buttonMode = true;
about.useHandCursor = true;
I have this on a MC I use for a button - and it works but only on HALF of the object - how can I make so it works on the whole object itself?
I have a BD return by PHP without problem : I have "all_good" and "no_good" If the variable change my condition don't change ..... why
[Code]....
I want to check the RGB color of the object using actionscript in flash. The name of the object is object1. I checked like this but it didnt worked.[code]...
View 2 Repliesis it possiable to make a condition in the flash params like wmode = transparent, but I want to do something like playback = "option1" then in the flash file it will play the frame label "option1" and so on, so i could use the same flash on multiable pages in differnt states.
View 1 Replies've been trying to make a code in actionscript that will set a function to true if an object is moved to a specific part of the screen. The confusing thing is making the rule apply to when it's between a specific four coordinates (in this case, 165 and231 as the X coordinates, and 295 and 330 as the y coordinates; "honey" is the instance name of the symbol).I was given this code:
bool IsBetweenInclusive(int value, int lower, int upper)
{
return value >= lower
[code]....
For example <s:TextInput id="sd" text="{if () {0} else if() {1} else {2}}"/>
Is it possible to do something like that?
I am pulling the words "true" and "false" from a query, but in flash I need them to be the values of true and false, not strings, is there a way to convert this datatype?
View 3 RepliesSelectedcolor, true to the text true or false is false text into print.colorPicker component in, I select Export to a selected color, the color value myMC texte into summer, but accuracy can not control.
var myColorPicker:ColorPicker = new ColorPicker();myColorPicker.editable = false;myColorPicker.visible = false;myMC.visible= false;myColorPicker.addEventListener(MouseEvent.CLICK, clickHandler);myColorPicker.addEventListener(ColorPickerEvent.CHANGE, changeHandler);[code].........
I m designing a webpage in flash. Actually I am looking for fullscreen for my webpage. I know some methods to do it, but with that, the position of the page contain not changes as per browser window's size. I have used below code, but what i want exactly for that see this website: [URL].
The code that I used is below.
Stage.align = "TL";
Stage.scaleMode = "noScale";
function modoFullScreen() {
Stage["displayState"] = "fullScreen";
} function modoNormal() {
Stage["displayState"] = "normal";
[Code] .....
Im making a flash game and just wondering, how can I protect the ingame scores from being hacked ? For the moment im using a random number, which is set on the server and sent to the client, then using a hashing function which will hash 'score+randNumber' (a bit more complex, but the same idea), then i send the resulting score and the hash to the server (obviously logging attempted cheats). This so far works, but it is still easy to hack the score by decompiling the flash and finding out what the hashing formula is. Is there any other way that the scores can be transmitted to the server with little or no possibility of hacking?
View 3 RepliesWhat is the most simplified way to get flash to return True(1) if a variable is > 0, returns False(-1) if a variable is < 0, and returns nothing(0) if the variable is 0?
View 4 RepliesDoes anyone know how to make a flash website fill the entire screen regardless of screen resolution?I've looked at the full screen tutorial (on this site) but it doesn't work on screens beyond 1024 x 768.Following website has implemented it perfectly: URL...I know the solution may be simple but i've been trying for a whole month now to no avail!
View 2 RepliesI am having a really strange issue where I can't get any hand cursors to come up in Flash Builder. Anybody else have this problem. I ran into a situation where I've had to convert a ton of Flash Builder projects just to get the hand cursors to come up. Weird this is if I open the swf's in Flash the hand cursors will show up. Once they get on the web though, though don't work. It's almost as if the buttonMode property will not work in swf's compiled in Flash Builder. I've tried with Flash Builder 4 and 4.5 and no luck. I told a friend, and he didn't believe me. So I asked him to just do a simple test in Flash Builder to create a Sprite and add it to the stage, add a click listener, and set it's buttonMode to true. He has the same problem, no hand cursor. I've even tried to set useHandCursor true with buttonMode, etc.
View 2 Replies