Quite simply I need a piece of code which jumps to a certain frame based on the actual dates below.
1-4rd Dec - gotoAndStop(1);
5th Dec - gotoAndStop(2);
6-7th Dec - gotoAndStop(3);
8th Dec - gotoAndStop(4);
I have found bits of code which allows you to specify which days, but not dates. My actionscript is very beginner so I can't work out what to do.
The first prob I had was when i used the load movie command the swf file was loading in the wrong position, it kept loading down and across the page. I had
PHP Code:
_root.myemp.loadMovie("banner.swf", 0);
I dont know why this is happening but I just fixed this by doing:
_root.myemp._x = 0
_root.myemp._y = 0
The next problem Im having is that I want to change the frame depending on which button was pressed. If button two was pressed I wanted to load "banner.swf" and gotoAndStop("pg2"), If button three is pressed gotoAndStop("pg3")Ive tried some things but cant get this part right such as:
_root.myemp.gotoAndStop("pg2")
"banner.swf".gotoAndPlay
I just dont know the syntax...
This is a CS4 file so and I have CS5 so if you give me either it will be awesome
I have a movie clip that follows the mouse..
Its not done yet but its gonna be a dog chasing a/the mouse...
I want to have it where the if the mouse is left or right of the following movie clip it shows it walking toward the mouse... so something like
if mouse positions is less the the cursor + 10 (pixels) goto and play frame with dog walking left and one for right up down (I want this to walk till its directly under or over mouse and then laydown or jump only when over or under mouse..
(say its a 20 pixel wide object and 10 on each side will cover the whole thing and not just the exact center pixel, thats what the 10 + movie clip position is for, but Is there a way to tell it to goto and play whatever_frame when mouse is left of any graphic on the sitting dog section??? like the equivalent of onRollLeft or whatever.)
this is the code i have.. its the top statement that doesn't work the bottom 2 do..
Code:
if (_xmouse < detail.x+10) {detail.gotoAndPlay(61);
}
detail.onRollOver = function() {
detail.gotoAndPlay(31);
[Code].....
I already created the shapes and placed them in the appropriate frames.. you should only need to mess with the actions on the instance "detail" (the dog face in frame 1 of scene 1 in layer "follower" ---- just the actionscript needed for that instance is needed in the reply.. you should not need to chage any of the layers, but if you do just tell me what you did and why.
my fla is to big to upload to this form so im placing it on my website here
Its not done yet but its gonna be a dog chasing a/the mouse. I want to have it where the if the mouse is left or right of the following movie clip it shows it walking toward the mouse... so something like
if mouse positions is less the the cursor + 10 (pixels) goto and play frame with dog walking left
and one for rightup down(I want this to walk till its directly under or over mouse and then laydown or jump only when over or under mouse.. (say its a 20 pixel wide object and 10 on each side will cover the whole thing and not just the exact center pixel, thats what the 10 + movie clip position is for, but Is there a way to tell it to goto and play whatever_frame when mouse is left of any graphic on the sitting dog section???like the equivalent of onRollLeft or whatever.)
[Code]...
changing a colour of something depending on the time on the system of the user?
View 14 RepliesI have several textfileds in a movie clip and I want to change text in a textfiled depending on which textfield you have clicked on. So if I have clicked on at textfiled named "text1" i want:
[Code]...
And then will text1 have the same text as "inputfield", but this dosen't seems to work only if you had a textfield called "textvariable" but that is not what I want. So any ideas how you can make this function?
Im trying to get my text to change depending on the playhead in another MC. This is my code... someone have a peak at what may be wrong
Code:
btn.onPress = function() {
ball.gotoAndPlay("start");
if (_root.ball._currentframe>2) {
[code]...
I am having problems with this if else statement. I have a variable (frame number 30) passing into my swf from another swf. This I know is working correctly.
But - I need to be able to direct to different frame numbers depending on the variable, this is working.
But when I place this code:
[Code]...
I have set the variable in my page using <param name="flashvars" value="menustate=<?php $pagename; ?>"> which works perfectly fine when I use a dynamic textbox in flash with the var name menustate.
But I need to send a MC to frame 2 if 'menustate = 2'. Anyhow, I just want to know how to control a MC with an external var. I can't use loadVars () because this var is coming from any page, not just one.
I have started to make an interactive movie where pushing keys moves a movie clip around the stage! And I can obviously make the movie clip do what I want, so here is the question: I want to make the movie clip change its animation depending on which keys are being pushed i.e. Left key the movie clips moves left, and my stick man changes to a running animation. Push nothing and it changes back to his standing still animation.
View 2 Replieshow to navigate to one frame or another depending on whether there is a correct or incorrect answer for the learning interaction. I am using the CS3 drag and drop.
View 2 RepliesI am currently developing a game in a school project using Flash CS4 and Actionscript 3.0. I have searched the web for assistance, but have come up empty. Here is what I am wanting to do...
I have a 3 by 3 grid on screen. Each block in the grid contains a movie clip with four targets which cycle through at 24 fps. Each target with have a different outcome depending on which frame the mouse is clicked.I do not want the animation to stop after the frame is clicked, however. There are several different types of targets in the game. Some add points, some subtract points, one target has the avility to freeze the animations for a set period, and another one is basically an instant game over. Being as how I could not find any aid via the web prior to this post, I am not even positive that this is possible to code in AS3.0.Does anyone know if this is possible, and if so, how would I go about coding it?
so i have a movieclip with this script on it (this makes my movieclip rotates)
ActionScript Code:
onClipEvent(enterFrame){
angle = (Math.atan2(_root._ymouse-_y,_root._xmouse-_x)*180/Math.PI);
[Code]....
Now, i have (let's say) 30 frames inside this movieclip, and i wan't it to change is current frame depending on the angle of the mouse (example, if i point my mouse to the right, the mc goes to frame 30, if i point my mouse a little up, the mc goes to to frame 27, if i point my mouse all to the left the mc goes to frame 15... etc...)
Basically the movieclip should change it's frame depending on the mouse angle,
By the way, i don't really wan't the moviecliip to rotate (like it's doing now) i want it to change it's frame only...)
I need to make a function (inside Flash) that will let a swf find out what date it is (each time it is loaded from a server) and then - according to the date - display a frame designated to that date. Optionally, I could have the swf load another swf based on the date.Originally I had planned to make some php wrap-around that would do the loading of different swf's for me - but this is not an option since the swf may soon be uploaded to a server that I cannot feed with php-documents (I don't get access for that - swf only!)So now I must find a way to do this within the swf. But as of right now I am clueless.
One thing I did learn during my googling the past many hours is that the "Date class" in Actionscript is risky - in that it 'reads' what date the end user has on his/her machine. So in the event that some user has the date misconfigured that will screw up what my swf will display.Therefore I am hoping that I could somehow do a variation of php's "echo date" and get the date from the server - but inside Flash. And then have that bit of data call for a certain frame/scene/loaded swf.
Is it posible to make a flash site, which will change the size when the vistors resolution is diferent? Practicly, every visitor will see the same size of the site, even if he has 800x600 or 1280x1024??Maybe making html go fullscreen but make the swf occupy only 80% of the screen, so it always have the same proportion to the users monitors.Do you have any example?
<center>
<table border="0">
<tr>
[code].....
I am trying to make a preloaded that stops on frames depending on how much is loaded, I want it to stay on frame 1 if 24% or less of the movies is loaded and for every 25% I want it to it to move forward a frame, So far I have done thus,
var bytes = _root.getBytesTotal();
var bytes_loaded = _root.getBytesLoaded();
if (bytes / bytes_loaded >= .25) {
_root.gotoAndPlay(2);
} else {
_root.gottoAndStop(1);
}
I am having problems with this if else statement. I have a variable (frame number 30) passing into my swf from another swf. This I know is working correctly.
[Code]...
(in case it was a string vs number issue.) it just stops - it does not go to frame 30. I need this because I need the file to stay on frame 1 if no variable is passed in. Am I doing something obvious wrong? Is there a better way to do this?
code to make a preloader jump to a frame depending on the quantity on the movie that has been preloaded? in ex i have a mc of a preloader if 5 percent of the movie its loaded the preloader mc will go to frame 2, if 10% the mc should go to frame 3, etc..
View 8 Repliesi'm making a game and i don't know what script to use to change the alpha color of the graphic symbol i used.the game is a shooting game, ex: target points is 50, if the score is 25 the alpha color should be at 50%, if score is 50 alpha is at a 100%i tried this script but it doesn't work
onClipEvent (load) {
if(score<=50){
skeleton_mc._alpha = (score/50*100);
[code].....
I'm trying (and struggling) to get my head around AS3 and am building a flash webpage. I have 2 layers in the timeline, each containing a movie clip matching the page size with instance names backgroundDay and backgroundNight. What I'm wanting is for the background to change for the day and night, so that from 18:00 to 06:00 the alpha of backgroundDay becomes 0 to show backgroundNight behind.
View 5 Replieshow to change the volume, asking how to detect the actual volume (not the set 100 volume) of music/sounds. does flash even detect the actual volume output? So when the volume is 0 (e.g. maybe at the end of a song) the ._alpha is 0, so all I need is a variable for the output volume of a song.
View 1 RepliesI have a datagrid in my Flash app whose data keeps updating quite frequently.On every update, I need to change the cell color of only those cells whose data has changed.That too, if the updated value is less than the older value then the cell color should change to RED else, GREEN.I have tried using labelFunction, cellrenderer, etc. But to no avail.By no means, I am able to access the present data in the cells to compare it with the new data.
View 1 Replieshow I resize (or tween-resize) the size of a flash movie depending on its content.[URL]When you click on a new page, the stage size resizes depending on how large the page is.Do I have to use javascript to do this (because I can't find the javascript on the pier website to take a look at it).Or can I do this with actionscript?
View 6 Repliesim working on a maths style jigsaw, and ive come across a problem of sorts, ive set random1_txt.text to 1 and random1_txt.text to 2 for testing, basically i want to randomise two textfields between 1 and 10, and also randomise the sign between either a - or a +
the answer can be computed by flash, now what i need it to do is stop on the frame number of the answer in answer_mc, these frames contain graphics of all numbers 1-20 in alpha format, this is so that the answer is in place, now the user can drag and drop movieclips into the answer box, and receive a correct or incorrect response
im at a loss on how to do this, i havent gotten around to randomising the sign as of yet i need to do more research but the general idea is as above
Code:
var startX:Number; //start of draggable piece
var startY:Number;
random1_txt.text = "1"
[Code].....
I have a progress bar as a healthbar in a game. The healthbar regenerates 10 pr millisecond for now because i like the smoothness. But if the delay increases it would take a lot longer to regenerate.
Aren't there any formular to calculate some kind of factor for this? so the lifebar would regenerate within a constant time no matter what. If the delay is 2 seconds it would just make the regen more choppy and if delay is 1 millisecond it would just update more.
I'm attaching the file so that you guys can see that? pretty basic. My main problem is to find out how can the mouse check the mouse position on stage and make the coverflow animate and the movieclip change angle depending on the side, I have to animate only 5 itens, here?s the AS:
[Code]....
Does anyone know what I can do to change the claudio scroller so that it will scroll ease depending on the vertical mouse position?
View 4 Repliesi want to change the width of dynamic TextBox depanding on the ammount of Text using ActionScript 3.0.
[Code]...
i have a dynamic text field that loads a variable into it (just a simple text file). this text file will be updated on occasion. i also have a movie clip to be positioned below the text field, however i want the movie clip to change position depending on how much text is in the text field so there isnt a large gap and so they dont overlap. is this possible? i tried the following actionscript to adjust the size of the text field depending on the amount of text. textField2.autosize = "center"; however i have no idea how to get the y position of the movie clip to adjust accordingly.
View 10 Repliesis there anyway to change a songs playback speed depending on a speed variable. heres the kicker tho im limited to using only as2.
View 2 Replies
