I have a movieclip that is locking to mouse center when dragging it. I know how to set up the boundary code, though the movieclip images are different sizes, so didn't want to have to create a custom code such as:t.startDrag(true, 290, 85, 910, 390);for each movieclip.does anyone know how to constrain the draggable item to within the left, top, right, bottom boundaries inside of a movieclip?
View 1 RepliesI have a draggable slider that looks like this:
The blue bar has the instance name track and the pink dot has the instance name puck.
I need the puck to be constrained within the blue area at all times, and this is where my maths failings work against me! So far I have the puck moving along the x axis only like this:
private function init():void
{
zeroPoint = track.x + (track.width/2);
puck.x = zeroPoint-(puck.width/2);
[Code]....
I have a MC called planPOPUP which is draggable and at the moment I am constraining where the MC can be dragged to by using the 4 co-ordinates method such as:
Code:
startDrag (_root.loadHERE.allImagesMC.planPOPUP, false, 116, 231, 913, 396);
Now would it be possible to, instead of using that method, place another MC around the edge of the stage, making a border, and then have some code so that whenever planPOPUP touches the border MC it cannot be dragged over it? Thus constraining it to within the borders of the stage?
I'm trying to create an interactive piece, where the veiwer can move sliders to effect to movement of other pieces. I understand how to contrain the movement of the sliders, and I've done so, but I'm having trouble figuring out how to constrain the movements of the mc's effected by the sliders. How do I do this without using the drag function?
View 3 RepliesWhat i am trying to do is move a MC around by dragging it, but i dont want the MC to move so far that it could be lost on the stage. i need some sort of parameters so that the MC is always showing. basically i have a large map of the united states and i want to be able to move it around and look at the individual states. the map is much larger than the stage and i am using a mask to clean up the appearance. i just want to make sure that the user cant move the map so far in one direction that it gets lost.
View 3 RepliesI am trying to create a movieClip that will always stay on a track. You get me, or have a lost you?Picture the London underground map, I want a little circle that will follow the track BUT also follow my cursor.So if I drag the circle to the right it will go to the right but always stay on track even if there are slopes or corners in the track.
View 3 RepliesI know how to set boundaries for a drag and drop, but is it possible to have one of corner of an MC stay anchored, thus forcing the mc to rotate around it like the hands on a clock? (I only need the MC to rotate about 90 degrees).
View 5 RepliesI'm making an image revealer in flash, but I can't wrap my head around how to constrain the slider bar to the area_mc. Mainly in the mouseMoveHandler. Can someone please give me some pointers?[code]...
View 1 RepliesI have an object in my program that you can click drag. However, I want to set a boundary for this object so that you can't drag it outside of a certain area. Using a standard if statement to check the coords of the object and reset them doesn't work as that causes a bouncing effect.
View 3 RepliesI'm using a custom drag for easing properties:
ActionScript Code:
var yMouse:Number;
var xMouse:Number;
onEnterFrame = function(){
yMouse = _root._ymouse;
[Code]...
As you can see, I'm trying to prevent it from passing _root.block by only allowing the mouse's Y to be followed when it isn't passing _root.block. The only problem is that once it hits _root.block, there's no way to drag it back from _root.block. It gets stuck. Is there a better way to prevent it from passing _root.block but allow it to be pulled back from _root.block
I have a big movieclip in a movieclip (bigger then the stage) when i roll over different movieclips the big movieclip moves, right now it just keeps moving when i keep the mouse on the movieclip/ I would like the movieclip to stop moving when its edge is about to leave the screen. I have no idea how i should do this, and all the tutorials i've found explain how to keep and object in the stage (this one is a lot bigger then the stage)
View 1 RepliesI am using an older version of flash. This is technically a game question but it is in older flash.My MC is a movable char that can jump, fall, and land on platforms. I would like to program a way for if the char falls and doesn't meet ground (i.e. falls out of view entirely) for a new frame to play on the main timeline OR for a movie clip to load asking it to try again OR for the game to start over completely. Whichever method is easiest.
View 1 RepliesHow would you force a mouse follow movieclip to snap to a x y position if it reaches x y boundaries or perhaps if a button is released the movie clip snaps to a x y position? Of course if the mouse returns to x y boundaries I'd like for the movie clip to follow again.
Right now this is the code I'm using to make the movieclip follow the mouse within x y boundaries:
Code:
onClipEvent (load) {
_x = 0;
_y = 0;
[code]....
I have a function that states when movieclip1 is dragged and hits a line then it stops the drag, however it seems to stop the entire drag function in the swf on the other movieclips even though they arent called in the function.[code]
View 1 RepliesI Have the drag and drop working where you drag a text movieclip onto a picture of an object movieclip but having some problems. I know its something to do with the hitTest function but when i drop the word "cow" onto the picture of a dog it actually says this is correct by displaying the word cow above the picture of the dog when instead it shouldnt allow me to drop the text onto the picture which doesnt match.
Basically i need to know how to seperate the drag hitTest function for the DogPic/DogText so that it has its own function to detect a hit. At the moment you can see in the below code I have 1 hittest fucntion detecting both collisions when they need seperate functions I tried making a seperate function for each but it didnt work
[Code]...
I am trying to create a mc with drag function. how to change another movieclip's x value when I drag my first mc...
videoSlider.addEventListener(MouseEvent.MOUSE_DOWN, scrollMC);
videoSlider.addEventListener(MouseEvent.MOUSE_UP, stopScrollMC);
private function scrollMC(event:MouseEvent):void{
[Code]....
I have a movie, within this movie I have a container which loads an external swf, the problem I have is that when this movie is viewed within a browser, if the browser is resized then the external swf that loads into the contanier resizes, going smaller or larger.How do I constrain a particular container to stay the same size, 100%?This is the script I have that loads the external swf, is there a way to constrain container?
View 3 RepliesI'm loading a .swf (flash game) (719 x 480) into a new .fla that is bigger (1280, 720) than the dimensions of the .swfThe game appears to load well, but when I start playing it, I realize that the game is messed up because it is actually running in the dimensions of the .flaCan somebody tell me how to constrain the loaded .swf to 719 x 480?NOTE: I can't change the .swf game file's codingAnd the .fla stage-size has to stay the same.
View 5 RepliesI load swf files continuously, but if one of the swfs has some defective code such as Mouse.hide() the mouse disappears when the swf is loaded. I want to constrain such malicious code in loaded swfs. There is also another problem related to containing loaded or loading swfs. When I load a swf which loads another swf to operate, It never completes loading (Event.Complete of contentLoaderInfo) because it needs another swf to load. However, the swf should be loaded before it runs. Since loaded swf is as-2, loader does not give any error. I am also suspicious whether or not it will give error if it is as-3.
View 1 RepliesI'm at a bit of a coders block, and I'm sure it's quite simple. I tried using the following:Code:((angle-180)%360) + 180But for angles < 180 degrees, it works just fine, but after that it get's a little funny. I know why it's doing that, I'm just looking for a way to fix it.
View 2 RepliesI am trying to created a constraint to a rectangle. I have the startDrag working and I am trying to constrain a square to the movie size of 600x400.I have been searching online help files but I can not for the life of me get it to work, would someone beable to put me out of my misery. I have attached the demo file I am working with but I will also post my script here for thoughs who prefer that...
Code:
("animation", false, 0, 0, 300, 300);
but know joy...
my code:
////Button Listeners/////////////
Code:
// BtnNav listeners
btnNav.addEventListener(MouseEvent.ROLL_OVER, btnNavOver);
btnNav.addEventListener(MouseEvent.ROLL_OUT, btnNavOut);
btnNav.addEventListener(MouseEvent.CLICK, btnNavDown);
[code]....
[code]...Now if I load this swf into a bigger SWF the mouse is acting in the entire movie as if it were in de loaded swf. This also happens when I test it (ctrl-enter) and make the resulting box bigger... the mouse will not fade at the border of the swf any more, but at the border of the containing window....) is there a (easy) way to constrain the mouse behaviour within the box of the loaded swf (like the MOUSELEAVE event triggered when i leave the box of the loaded swf in stead of the entire stage?)
View 5 RepliesI have a MC on stage with instance name of holder.I load a swf into holder. I want the swf which is bigger than holder to have the same height and width as holder.var myLoader:MovieClipLoader = new MovieClipLoader(); myLoader.loadClip("contact.swf", holder);
View 2 RepliesI have some script that loads an external image into the UILoader that also has a mask created based on loaded image width and height, which also centers on stage. That works great. On user click somewhere within the loaded image, the image then scales from that mouse position out.
i.e.: if I click top left corner image scales from that point out, center, left, right... etc. using the tween. That works great.
On mouse move image then pans reverse to mouse position. i.e.: I move mouse left image pans right, move mouse up image pans down, top left corner image pans down bot right...etc. Also using tween. This is where it becomes tricky. The image does pan, however it does not pan completely to left, right, up, down, diagonally and so forth. once mouse reaches boarder of mask the image pan stops, unless mouse is way outside boarder.
Then that creates another problem where the image now pans so much that it goes past the boarder and almost out of sight. Ideally when mouse moves to masked boarder, panned image should be at its image boarder then stop. Constrained within the masked boarders.
Code:
var myImagePanTween;
function moveImageTween(e:TweenEvent = null):void {
var CurrentMouseX=mouseX;
var CurrentMouseY=mouseY;
[Code] .....
I think there should be away to include a constraint within the Tween, as well calculate the image size so that when mouse reaches boarder the image should be panned to its width/height, up, down, corners ect.. within the mask. Make sense?
does anyone have an equation for resizing mc and constraining the prooprtions also.. through AS
View 6 RepliesI'm doing a tutorial on using the startDrag function but have no idea how to get the coordinates for my rectangle.How do you find the 4 points? I've tried using my mouse to pinpoint the location but that doesn't work.Here is the generic code:myMovieClip.startDrag(false, left, right, top, bottom);
View 2 Replieshow to constrain the proportions of a flash site so that when a browser window is resized the swf resizes to fit?Is it actionscript needed in the fla or some html in my dreamweaver file? [URL]
View 1 RepliesWhat I would like to have happen, is when the user drags arrow_mc, it will only rotate between 0 and 90 degrees. If you go above 90 degrees, and continue dragging, it will stop moving. The same would happen if you went below 0 degrees.Currently, the code below works, but you can go around in circles back and forth.Iwith figuring out how to constrain the drag rotation between specifid numbers, in degrees.
ActionScript Code:
arrow_mc.onPress = function () {
arrow_mc.onMouseMove = function () {
[code].....
I have a small movieclip where an external image gets loaded into a custom shape mask. The user can then drag the image around. This is all working fine.
I am now trying to constrain the movement allowed so that the image cannot ever leave the masked area.
On my startDrag() function i have tried to include the following properties but i cannot get this to work:
(false,new Rectangle(-xpos,ypos,stage.stageWidth,0));
Code:
// Imports.
import flash.display.Sprite;
import flash.display.Bitmap;
import flash.display.BitmapData;
[Code]....
Can I constrain textbox to get only values between 1 and 60?
View 2 Replies