ActionScript 2.0 :: Attach Sound To Mc?
Mar 30, 2012attaching sound to a mc in mc. My script :
var my_sound:Sound=new Sound();
a.b.c.attachSound("sound");
a.b.c.start();
but I am able to listen any sound.
attaching sound to a mc in mc. My script :
var my_sound:Sound=new Sound();
a.b.c.attachSound("sound");
a.b.c.start();
but I am able to listen any sound.
I want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 RepliesI have been at this for about 19 hours straight! I am going to go to bed immediately after this post, but for crying out loud, I have NEVER had this problem before today! Before anyone reads ahead and says 'you have to attach your sound object to a completely separate mc to be able to control it independently from all other sound/root volumes.' see if the following code accomplishes just that:
[Code]...
I want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 RepliesI am making a little hidden object game and I want a sound to play everytime an object is clicked on, but I can't figure out how to do it.my sound is a movie clip called "meow". Anyone know how to do this?here is the code:
onClipEvent (load) {
found = [];
for (i=0; i<7; i++) {
[code].....
I have a problem playing sound on mouse over event, sound attached from xml file.The question is, can I attach two, or more different (excat) sound to the same movieclip?F.E. I have a movieclip about the dog, and some button on the scene, "name", "sound", "etc".If I click the button "name", and after I pointing the mouse over the dog_mc, the sound would be "a_dog.mp3", but if I click on the button "sound, the played mp3 would to change the "bark.mp3" on mouse over. Of course, there is lot of animals clip, so every clip have to have own sounds.I am would to avoid attach the sound directly inside the movieclip, but not so familiar in XML, so if somebody can me explain it is possible.
View 5 RepliesI would like to attach a sound to a movie clip that is serving as a button.
I want the movie clip button to make a little noise when the mouse rollovers it.
I am using Flash MX.
how I can have a sound play when something is rolled over.
It says that you need to preload and then play.
My purpose is for a CD ROM.
Do I have to preload everytime and then play?
Or do I preload once. And then play whenever I need it?
I want to attach a sound file and have several cuepoints that will cause certain movies to play as the sound file plays.I've looked into this and think I'm right in saying that you can't have an external sound file, like you can have an external Flash video file?What would be the best way to attach my large sound file?One way which I thought I could do what I need: create a Flash video file, don't show the video file and just play it... and then use Flash video's cuepoints.
View 4 RepliesI have a movie clip on stage and would like to attach movie clip and sound from library.
View 3 RepliesIs there a way to attach a sound to onRelease globally?
View 7 RepliesI have a foreign language resource which randomly creates and displays a number. The player then needs to select the correct number in a particular foreign language. What i also need to do is play the audio for the randomly created number. I have numbers 13-20 all as seperate sound files also named as identifier names 13,14,15 etc up to 20.
The following script loads the sounds. Sound1 is the sound which needs to hold the random number which is generated:
ActionScript Code:
onClipEvent(load){
Sound1 = new Sound();
rndClip = ????????;
[Code]....
I need to load this array as Sound1 so that the correct sound file plays to match the random number.
I am using attachSound to attach multiple sound through the library into different variables. But when I try to use setVolume, I get the same volume for all the sounds playing at that time.
View 8 RepliesI'm working on a background music class and found that you cannot use the Sound class in a class file. Specifically, initiating and attaching the sound. Starting, stopping, getting the duration and such seem acceptable (though I haven't tested this yet). I've done a few searches and haven't found any work arounds other than when the class is called, hand it the sound object with the sound already attached, like this:
ActionScript Code:
import bgMusicClass;
var bgSnd:Sound = new Sound(this);
bgSnd.attachSnd("newWave.mp3");
var bgMusic = new bgMusicClass(bgSnd);
I've attached a sound to menu buttons using AS. The sound worked perfectly until I created a external preloader file to load the swf into a container_mc. Now no button sound? If I load the swf without the preloader file the sound works?
Code: Select all//set up sound instance
var btnGrpAudio:Sound = new Sound(mcSoundHolder);
btnGrpAudio.attachSound("beaming");
btnGrpAudio.setVolume(60);
menus[i].btn.onPress = function() {
btnGrpAudio.start(); ....
I would like to attach a sound to a .fla file that starts to play when the file is opened. I have created a button and would like to be able to use this button for a visitor to the site to mute the sound. So, I'm trying to accomplish two things, first attach a .wav file, then get the mute button to work.
View 1 Replieshow to eliminate previos attach before move to next attach MC..let say as u can see in my code..I just settign the interval..for 2 second..in other to attach the mc on eby one...so how to set up the code so that if the 2nd mc has attach it'll remove the 1st one attach for certain time...and so on..the scenario like this..
mc1 attach
after 2 second
mc2 attach --> remove mc1
after 2 second
[code]....
i'm trying to figure out how to reset or refresh clips that are dynamically attached to another clip based on records returned through xml.asically if the user chooses a different filter for the database query I need to be able to refresh a scrolling list made up of clips which will be different based on the filter.this is what I have for a function. I try to use "attachEmptyMovieClip" but to no avail
Code:
getAll=function(){
members = getMembers.firstChild.childNodes;
[code].....
I am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 RepliesIs there any AS3 library or code-snippet that can create altered versions of a Sound object on-the-fly (at runtime)? Either based on:
An existing Sound object; A ByteArray object;
For example, say you have a "dry" sound of a gun-shot. You could:
[Code]...
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I am using a flash app. I can send and receive streaming data to FMS by using this app, like the chart I attached. [URL] This app uses RTMP to access to FMS. I want to upgrade this app to display sound level of each client. Is it possible by using Actionscript and FMS? If so, which class should I use?
View 3 RepliesI have a project that requires me to display the waveform for a uploaded sound. The sound is always an MP3, most of the time 22.05 kHz mono, with speech only. The project are written with Flex/ActionScript 3. It's meant to run in the browser, but might also consider converting to AIR if that can help.
All examples I've found and looked at for generating a wave, are either doing some visualization in real time as the sound is playing, or, the most promising, as3soundeditorlib, keeps the wave already generated, but does it very slowly, seemingly using as long time as playing through the audio would've taken.Is there any way to generate the wave faster than real time?
I am using the following to extract the byte info from a sound object - however if I go back to the same sound object and run this again, The byteArray has no bytes available.
var data:ByteArray = new ByteArray;
sound.extract(data,sound.length*44.1);
data.position = 0;
return data;
Is this the correct behavior? Is there not a way to do this multiple times on the same sound object?
I have some sounds in my library. They are all exported and have been given class names like C, D, E etc. I have another class that represents a button. This class stores a reference to one of the Sound in my library. I set the type for this variable to Sound. When I try to set it I get the error: cannot convert C$ to flash.media.Sound I try as Sound, for example key.note = note_array[p] as Sound; The value ends up as null.
View 2 Replieshow to add mute sound and unmute sound script in a single button?
View 2 RepliesI use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...