ActionScript 2.0 :: Attach Sound To Menu Buttons And External Preloader?
Aug 8, 2008
I've attached a sound to menu buttons using AS. The sound worked perfectly until I created a external preloader file to load the swf into a container_mc. Now no button sound? If I load the swf without the preloader file the sound works?
Code: Select all//set up sound instance
var btnGrpAudio:Sound = new Sound(mcSoundHolder);
btnGrpAudio.attachSound("beaming");
btnGrpAudio.setVolume(60);
menus[i].btn.onPress = function() {
btnGrpAudio.start(); ....
View 6 Replies
Similar Posts:
Apr 17, 2007
how to load audio and have it ready for after the preloader. I had it export for actionscript before but it loads before the preloader starts which really elimates much of the need for the preloader. I took off the linkage for it to load for frame 1. I search the forums and saw that a few people recommended following link
[Code]...
View 3 Replies
Jun 28, 2004
I want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 Replies
Mar 15, 2008
I have been at this for about 19 hours straight! I am going to go to bed immediately after this post, but for crying out loud, I have NEVER had this problem before today! Before anyone reads ahead and says 'you have to attach your sound object to a completely separate mc to be able to control it independently from all other sound/root volumes.' see if the following code accomplishes just that:
[Code]...
View 2 Replies
Jun 28, 2004
I want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 Replies
Nov 30, 2009
Basically I have a site that will load an external .swf for each menu button to display the content for each page. I have found tried several methods to do this and all at least create a loader and display the default .swf without problem.
Heres the code...
***start code***
stop();
var xPos:Number = 0;
var yPos:Number = 125;
[code]....
My problem is I am getting the following error:
"1120: Access of undefined property event. var newSWFRequest:URLRequest = new URLRequest(event.target.name + ".swf");"
Now the buttons I have set up are text converted to a button. Not sure that matters as I have seen other instances where people create an object (retangle) covert that to a button and put the text inside of that as an instance of the retangle. I have even created a new .fla with just a single button creates with a retangle and the text as an instance of that and still get the same problem.
View 2 Replies
Dec 18, 2011
I am using a main .swf with buttons on a navigation menu that loads external .swf(s) - these load external videos (I use them as their backgrounds).In the main .FLA I have used the following code (in the first and unique frame):
CODE
var Xpos:Number = 110;
var Ypos:Number = 180;
var swf:MovieClip;
var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs/eyesClosed.swf");[code].....

I can make each button on the menu load each external .swf correctly with videos included - but when I leave that .swf using the navigation buttons to go to another section, the video and audio keep working in the background.
View 4 Replies
Dec 18, 2009
I am currently doing a project that to create a full flash website. The website contains a preloader, an introduction movie, and dynamically loads external swfs when click the menu buttons. I am struggling with the preloader part. My preloader movie does not shown until 50% and disappears at 90%. I have searched for solutions on the internet for days but could not find any. I attached my source file as well as the swf.
View 7 Replies
Jan 28, 2010
I've just made a preloader, which is a separate file that loads the main movie. When I try to compile the preloader, I get: ArgumentError: Error #2068: Invalid sound. All the code for the streaming sounds is contained in the main movie, and when I compile the main movie directly it finds all the sounds and plays them with no problem. It's only when I try to compile the preloader that I get the problem. Here's the relevant stuff from the main movie:
[Code]....
View 3 Replies
Mar 30, 2012
attaching sound to a mc in mc. My script :
var my_sound:Sound=new Sound();
a.b.c.attachSound("sound");
a.b.c.start();
but I am able to listen any sound.
View 2 Replies
Jul 10, 2009
how to attach images to this menu using xml http:[url]....
View 3 Replies
Mar 19, 2009
I am making a little hidden object game and I want a sound to play everytime an object is clicked on, but I can't figure out how to do it.my sound is a movie clip called "meow". Anyone know how to do this?here is the code:
onClipEvent (load) {
found = [];
for (i=0; i<7; i++) {
[code].....
View 3 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
View 2 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
View 4 Replies
Mar 6, 2007
i'm using movieClipLoader and i want to attach a loadbar graphic instead of text...but my loadbar doesn't load the text works but not the bar... anywho here is my code:
[Code]....
View 4 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
View 2 Replies
Nov 3, 2009
I have a problem playing sound on mouse over event, sound attached from xml file.The question is, can I attach two, or more different (excat) sound to the same movieclip?F.E. I have a movieclip about the dog, and some button on the scene, "name", "sound", "etc".If I click the button "name", and after I pointing the mouse over the dog_mc, the sound would be "a_dog.mp3", but if I click on the button "sound, the played mp3 would to change the "bark.mp3" on mouse over. Of course, there is lot of animals clip, so every clip have to have own sounds.I am would to avoid attach the sound directly inside the movieclip, but not so familiar in XML, so if somebody can me explain it is possible.
View 5 Replies
Nov 10, 2004
I would like to attach a sound to a movie clip that is serving as a button.
I want the movie clip button to make a little noise when the mouse rollovers it.
I am using Flash MX.
View 1 Replies
Jul 19, 2005
how I can have a sound play when something is rolled over.
It says that you need to preload and then play.
My purpose is for a CD ROM.
Do I have to preload everytime and then play?
Or do I preload once. And then play whenever I need it?
View 1 Replies
Jul 28, 2005
I want to attach a sound file and have several cuepoints that will cause certain movies to play as the sound file plays.I've looked into this and think I'm right in saying that you can't have an external sound file, like you can have an external Flash video file?What would be the best way to attach my large sound file?One way which I thought I could do what I need: create a Flash video file, don't show the video file and just play it... and then use Flash video's cuepoints.
View 4 Replies
Aug 18, 2011
I have a movie clip on stage and would like to attach movie clip and sound from library.
View 3 Replies
Apr 7, 2004
Is there a way to attach a sound to onRelease globally?
View 7 Replies
Jan 4, 2010
I have a foreign language resource which randomly creates and displays a number. The player then needs to select the correct number in a particular foreign language. What i also need to do is play the audio for the randomly created number. I have numbers 13-20 all as seperate sound files also named as identifier names 13,14,15 etc up to 20.
The following script loads the sounds. Sound1 is the sound which needs to hold the random number which is generated:
ActionScript Code:
onClipEvent(load){
Sound1 = new Sound();
rndClip = ????????;
[Code]....
I need to load this array as Sound1 so that the correct sound file plays to match the random number.
View 2 Replies
Mar 27, 2006
I am using attachSound to attach multiple sound through the library into different variables. But when I try to use setVolume, I get the same volume for all the sounds playing at that time.
View 8 Replies
Jul 13, 2011
I'm working on a background music class and found that you cannot use the Sound class in a class file. Specifically, initiating and attaching the sound. Starting, stopping, getting the duration and such seem acceptable (though I haven't tested this yet). I've done a few searches and haven't found any work arounds other than when the class is called, hand it the sound object with the sound already attached, like this:
ActionScript Code:
import bgMusicClass;
var bgSnd:Sound = new Sound(this);
bgSnd.attachSnd("newWave.mp3");
var bgMusic = new bgMusicClass(bgSnd);
View 2 Replies
Aug 3, 2004
I'm trying to find the way to attach the same actionscript to multiple buttons(over 100 buttons) at one time, instead of copying and pasting the actionscript in every frame. I have over 100 buttons as a seperate object in the library. In timeline, there are 100 keyframe, that each frame contains one button. Each instance is from one button. I don't want to write a same actionscript in for every button object. Is there anyway to get around that?
View 2 Replies
Aug 3, 2004
I'm trying to find the way to attach the same actionscript to multiple buttons(over 100 buttons) at one time, instead of copying and pasting the actionscript in every frame.I have over 100 buttons as a seperate object in the library. In timeline, there are 100 keyframe, that each frame contains one button. Each instance is from one button.I don't want to write a same actionscript in for every button object.
View 2 Replies
Feb 12, 2004
I need a tutorial for a hierarchical drop down menu system that drops down 3 sub levels. Do I make the items in the sub menus individual buttons and then insert them into a movie clip or make every sub menu item a movie clip and insert them into buttons?
View 1 Replies
Nov 12, 2008
I am looking at creating a menu with three movieclip buttons on a main menu. I want to keep these buttons on the top of the screen at all times. I am opening different swf's and I want to make sure that the buttons are still showing. I know there is something with changing or swapping the depth of the movie clip when it loads the new swf's in, but I have not found anything that is seeming to work.
View 4 Replies
Sep 8, 2008
Say I have a symbol MyButton, as a button with the 4 special frames. When you mouse-over/mouse-out an instance, I'd like another object to be affected... text in some text box changing, or the item becoming visible, or similar. I know AS3 but I'm a real noob at CS3. I don't really get how actions work in CS3.
View 5 Replies
