ActionScript 2.0 :: Get No Trace Statement Or Loaded Clip?
Nov 22, 2004
Trying to get a MovieClipLoader to work for me... This code is taken pretty much right from Macromedia's Help file. I get no error messages (yay), but I also get no trace statement (boo) or loaded clip (boo2). There *is* a clip named audioplayer.swf in the same directory as my file.
[Code]...
View 2 Replies
Similar Posts:
Apr 19, 2004
is there a way to create an if statement that would load a movie clip after a different movieclip is loaded.i have text_mc and scroll_mc. I dont want scroll_mc to load unless the content is loaded into the text_mc.I tryed to make an if statement sort of like a something used for a preloader but I must have been off just a bit because it was not working. I dont even know if it possible.
View 7 Replies
Aug 19, 2007
I've been scouring the internet for the past hour or so in search of how to do this. It's very simple, but every example seem to want me to bring a loaded movie clip, or trace mouse position. I don't need that! Basically I have a button that when clicked comes to the front (using behaviours), moves to a new position, scales and then I want every other button behind it to blur. Obviously I want them to blur gradually to keep the flow going. Here's my current code so you can see where its going:
[Code]...
View 1 Replies
Mar 24, 2010
When I run this code, I get to click on either the container "Big Box" or its contents "Poly". The associated trace states should fire but look at the tracer on "Poly" it fires twice. Why? [code]
View 2 Replies
Mar 10, 2010
i suspect the answer here is "no", but i'm wondering if it's possible to set the color of trace statements which appear in flex's console pane. ie, i have a few "levels" of log statements, and i'd like the warnings and errors to really stand out.
View 2 Replies
May 2, 2011
Flash is returning decimal floating point formats in evaluation results under the IEEE 754-1985 format.I looked it up and this seems to be how ActionScript 3 was designed to follow that standard which creates these results.This doesn't happen in the ActionScript 2 compiler. It only happens under ActionScript 3, paste these trace statements and compile so you can see what I mean:
Code: Select alltrace(48.48 + 0.01) // returns 48.489999999999995
trace(18.48 + 0.01) // returns 18.490000000000002
this one is ok: Code: Select alltrace(18.49 + 0.01) //returns 18.5
I need a two decimal place precision result as this is for an algorithm that I'm trying to use to round up or down by a penny so I can't simply convert it to an integer but there's no pattern that I can see so I can predict results for it either.I can't have a $18.8999999999995.
View 2 Replies
Oct 23, 2009
I am having a problem with the if statement in my timer function, the trace statement within in it is not working, eventually I wanted to use this if statement further but need to make sure it is working first.
Code:
timerFunction();
} function call in function above
function timerFunction() {
trace("hey");//this trace works
var myTimer:Timer=new Timer(1000,15);
[Code] ......
View 8 Replies
Jan 27, 2009
I am new to actionscript and just like some of you, I would like to start off on the right foot. After several attempts to solve this problem I am now taking a break and reaching out to those in the community. I have created a .as file named Main.as and the code inside main.as is:[code]then i created a new fla file and named it testas. I then typed Main in the Document class under properties.The code has no errors and when I attempt to test the movie, there is no output to the output panel.
View 7 Replies
Oct 17, 2006
I have the following code in the main timeline:
[Code]...
how to make the final trace statement work?
View 5 Replies
Dec 1, 2008
Is there a bug with stage height in Flash? Every time I use that and run a trace statement, it's wrong.
View 1 Replies
Mar 3, 2010
Is there a statement in AS3 that will return current class and/or scope? I'd like to use that in trace statements so that I know the exact location of a trace.
View 2 Replies
Sep 10, 2009
3 buttons are called to the stage, and each button has an eventlistener that listens for a Click event. A switch statement is used to trace the clicks, but the only message i get is from the "default message"?[code]...
View 3 Replies
May 25, 2004
I am making a jigzaw and when all the pieces are put in the right place, another movie clip will be played.All pieces are buttons placed in different movieclips. The movieclips are then placed in scene 1.
In frame 1, I've written
_global.var1=0;
In frame 2, I've put movieclip1, and in movieclip1 I've placed button1, with the following actionscript:
on (press) {
startDrag ("_root.movieclip1");
}[code]..........
However, when the piece is in the right place, and the if-statement has been activated, _global.var1 is still 0 when I trace it in frame2.
View 3 Replies
Apr 8, 2011
I'm making the transition from AS2 to AS3 and have some rollover and rollout code below. I'm looking to place an if statement into the onClipOver function that can trace what specific button is being pressed. In AS2 I would use the "this" command to see which movieclip was being used. how to properly write the IF statements using AS3 in the code below.
[Code]...
View 2 Replies
Jul 23, 2010
Is this possible? I need to add a Click event to a button (actually several) in a swf that I've loaded. Is this possible? I'm currently trying to trace the objects but getting nowhere.
View 5 Replies
Aug 12, 2010
I have the same swf externally loaded over multiple frames. I am hoping to be able to check to see if the swf is loaded, if not then load it into the container movieclip or else don't load the swf.
View 0 Replies
Apr 8, 2005
how to trace a movie clip and place it into an empty movie clip i create at the begginning of the movie
View 5 Replies
Feb 23, 2009
Can I trace the width of a loaded picture? I thought it would work something like this, but it won't work..
View 5 Replies
Mar 8, 2011
i have navigation menu animated click it pops up from corner to center click its gone and gotoandplay('page2') is triggered. while page loads menu goes away.
So my point is i want to show page title only after menu is gone (menu clip stopped playing) this works but menu is child MC i try put
[Code]...
but how i build event handler that constantly checks for this message?
View 1 Replies
Apr 8, 2005
i want ot no how to trace a movie clip and place it into an empty movie clip i create at the begginning of the movie can you please help me.
View 5 Replies
May 14, 2010
I am initiating loading a swf file, "bg1.swf". I have a button that, when clicked, is suppose to check to see if "bg1.swf" is loaded.I cant figure out how to write the conditional "if" part. Currently, instead of checking to see if my statement is actually true, it executes loading bg1Req? Here is the code .
var bgLoader:Loader = new Loader();
var bg1Req = new URLRequest("bg1.swf");
var bg2Req = new URLRequest("bg2.swf");
[code].....
View 7 Replies
May 2, 2011
i am working on a project where i am using the attach movie to load a clip from the library..
Actionscript Code:
regionListener.change = function(){ attachMovie(_level0.frameName + cbRegions.value,"clip",2);
Now i need to hide the sample_mc that is already on stage only if a clip is loaded... on the else statement sample_mc should be visible again..So...i dont know how to say that in AS2 language...
Actionscript Code:
If clip is loaded , sample_mc._visible = false; else sample_mc._visible = true;
View 5 Replies
Jan 21, 2010
How can I trace all available Movie Clip variables and functions?
View 5 Replies
Apr 15, 2005
I have a movie clip on the main timeline which is acting as a button, in the over state of that mc button are 3 regular buttons, which appear on mouseover the mc button, but do not hilite, and will not respond to a trace.
View 3 Replies
Jul 29, 2007
I want to trace all the names of a Movie clip properties. Funny thing is that I used to know how to do that. Now when i use [code]It only traces the names of nested Movie Clips not also properties like _x, _width. Anyone knows how to do that?
View 1 Replies
Jun 2, 2009
It's about targeting movie clips... In AS2, you just target a movie clip like so :trace (FirstMc.ChildMc1.ChildMc2.ChildMc3._x) // Will send out the x position of ChildMc3 But is AS3, i see that there's a function called getChildByName('put child name here'). But what if it's such a long way to go to that child??? Does it have to be:
FirstMc.getChildByName("ChildMc1"). getChildByName("ChildMc2"). getChildByName("ChildMc3").x
That just seems to tedious and I'm sure Adobe thought of a clean way of targetting??
View 11 Replies
Oct 24, 2011
Just starting to delve into as3. I have made a flash website with four navigation buttons (home, products, about, contact). When user clicks on "products", an external movie clip is loaded and everything works fine. User clicks any button after that, and myLoader.unloadAndStop, the swf is removed when you navigate away from "products". However, if the "home", "about", or "contact" buttons are clicked first (before the external swf has been loaded), it of course, throws the 1009 error.I need some sort of if/else statement to check whether or not the external swf is loaded, remove it if it is, and if not, just navigate to the "page" clicked.[code]
View 0 Replies
Jul 7, 2007
I don't know if I'm using the correctly terminology but I've made a movie rater in flash for MySpace. The problem is it doesn't allow script access. The music players on MySpace load xml files through the embed statment.
Now, I've done the same thing using this:
[URL]
I know how to read xml files in actionscript (variable=moviedata.xml.firstchild.firstchild.node value; ) and all that good stuff. The problem is, I don't know how to read an xml file that has been loaded this way with out the actual load commands being in the swf itself.
View 5 Replies
Apr 15, 2005
I have a movie clip on the main timeline which is acting as a button, in the over state of that mc button are 3 regular buttons, which appear on mouseover the mc button, but do not hilite, and will not respond to a trace. the .fla is at [URL]
View 3 Replies
Dec 18, 2005
[Code]...
What I'm trying to do is: When this button is pressed, whatever is in the current news_Clip movieclip goes to frame 71 and plays till it reaches the end of the outro animation which is frame 101. When it reaches frame 101, I want to load a new swf into news_Clip. Using the above code, the contents of news_Clip does its outro animation but the new SWF is not loaded into it after reaching the end. I've been screwing around with this for the past 7 hours and can't figure out what I'm not doing or doing wrong.
View 1 Replies