get the Function when you're in a function processing code.
Example:
Code:
function handleMouseEvent(event:MouseEvent) {
event.target.removeEventListener(event.type, thisFunction);
}
Where thisFunction should be the Function of 'handleMouseEvent'.
I haven't been able to find anything that explicitly does this.. although some debug techniques could be modified to offer the functionality needed.
I have 2 functions, 1 loaded before another. Some value are determine by the other function data, but since one of it has to load before the other 1, how should I get the data that is loaded after current function?
private function wMessage():void {
Message.width=Name.width+20;
}
[Code]....
I've taken out some other unnecessary codes, but as you can see Name position is set according by the position + width of Message, but I want Message's width to be not smaller than Name
I'm wondering if there is a way to get the Function when you're in a function processing code.Example:
Code:
function handleMouseEvent(event:MouseEvent) {
event.target.removeEventListener(event.type, thisFunction);
[code]......
I've got a Vector of ViewToActionMap objects, which have following constructor:
public function ViewToActionMap(_forModule:eModule,
_forAction:eViewAction,
_toFunction:Function,
[code].....
I want to get the name of a function from inside that function. e.g.:
function blah() {
I want to get the string "blah" here, from the function's name
}
Or at least the Function object?
i have a function which when the space bar is pressed it goes to a different frame. However the function can still be performed on different frames, how can i make the code only apply to that frame?
ActionScript Code:
function spacebarGoto(event:Event){
if(pressSpacebar){
gotoAndStop("start");
}
}
I hope I have worded the question ok. I know that you can pass the 'id' of the component but I'm just wondering if there is a more generic way. I have tried using 'this' (shown in example below) but the 'this' keyword refers to the application.
[Code]...
i need a function or a property that returned the current value of the time line
View 1 Repliesi need a function or a property that returned the current value of the time line
View 1 RepliesIm trying to create a loop of items like this...
for each (var btn:Object in ViewButtonData)
{
// build element[cocde]..........
I would like to pass in current HBox to the 'HoverTab' function. Is there a way to do that?
I have set up a functioning xml image gallery with simple left and right arrows. I am now trying to make it an infinite looping gallery swapping the first and last sprites in an array and + and - their x value so they "physically" move in the photos container.
All of this works fine except for the actual loaded image. The xml data, name description, and image to be loaded are set up in one function and all the data is added to the sPhotoSprite (sprite) in this function. This All works perfectly..
A second function is then called to add the current image:
var currentImage:Loader = Loader(evt.target.loader);
then currentSprite.addChild(currentImage); (the sprite is declared at the start)
The problem being that the sPhotosSprite is no longer reference-able. I've tried :
imageLoader.contentLoaderInfo.addEventListener(Eve nt.COMPLETE, function( evt:Event)
{ imageLoaded( evt, sPhotosSprite )
} );
But this only ever returns the final sprite. The same problem of only ever returning the final sprite occurs when I try setting an external sprite to hold the current sprite in it and then referencing it in the second function.
I'm trying to get a quick replay command, "pressing space returns the scene to the previous frame".
[Code]...
The current function returns me to a previous frame (40), however the event does not stop, rather it keeps on adding new events ontop of each other once it returns to main frame. The main frame being where the actionscript is executed.
I've been playing with prototype a bit and I've noticed that either it isn't as static as it should be or that some functions are protected from altering, or that in some cases the prototype actually extends a function. For example, I was trying to modifiy the global trace function to output the current time of a trace action, something like this :
Code:trace("lulu"); // output 12:48:17.286 lulu I DID achieve something close to it, but it seems that I haven't actually modified the global trace function, but rather it's "_root" counterpart,
[Code]...
I need some scripts for the countdown with a current date like 01.30.2009 to count down to meet the deadline - 04.16.2009. how to do that except I can only build a very simple countdown.
View 9 RepliesI'm trying to get this one function to be able to call many functions (not at once, but call many possible ones)In other words, I'm trying to get this variable to be named as a function. That way, this one variable can create multiple functions.example:
actionscript Code:
class Thing extends MovieClip{ var funcvar; var othervar; function onLoad() funcvar = "YYY"; othervar = "ZZZ"; function onEnterFrame()
[code].....
is it possible to write a function to move an object and then call that function on a clip event for instance
function (bounce){
script;
script;
}
and then call it by saying
on(mouseOver){
this.bounce;
}
is it possible to store a list of params needed for a function in an array and then use that in a funciton call?
[Code]...
or something like that?? Prob have to iterate the array but how do i get the params into the function call? Is this even possible?
How do I execute callback functions dynamically by passing a function in as an argument to another function?
Look at this example:
Code:
package {
public class myClass extends MovieClip {
public function myClass(callback) {
[code]....
I have a set of Cue Points in an FLV I'm playing. It's an interactive quiz, so the idea is that flash will change a variable, theAnswer, to a different letter depending on which question it is. The answer to question 1 is B, question 2 is D, etc. Either the cue point event listener isn't working, or else it is working and Flash isn't declaring the variables. 1120: Access of undefined property theAnswer. I literally can't find a single problem with my code. I have an almost identical Event Listener further down which works.
[Code]...
I need to return to my original function after capturing an event (downloading something) with another function. The original function needs to return a value, which depends on the downloaded data. So, I'd like to pause original function for the time needed for the download and the eventhandler function to complete it's work, and resume it afterwards.
The obvious way is to set a flag value (both the original function and the eventhandler are within the same class) and make the original function check it until the eventhandler function changes the flag. But that would be wasteful, and my AS is slow enough already:) [other parts of the application utilise some heavy graphics]. Is there another way? Like an event that gets captured "in the middle" of the function? Or some other form of flow control?
Let's say I have a Custom Event Class, and it has several Event types stored in static Constant:
[Code]...
Is there an easy way to validate that the type passed to the Constructor is one of the Static Constants of the Class, without having to check it against each value?
is it possible to declare function this way
ActionScript Code:
function startShake(e:MouseEvent, num1, num2):void
what i mean is it possible to send to the function not only en event but also a variable and a second question how can i access
ActionScript Code:
function stopShake(e:MouseEvent):Array
this array that function return.
How create baseurl function in flash and how i call that function in button script
View 1 RepliesI have this code but I cannot work out how to fill in function parameters based on an array and it's length, see line 7
[AS]
import com.robertpenner.easing.Cubic;
MovieClip.prototype.framesTimeout = function(func:Function, frames:Number, args:Array) {
[code]....
Is it possible to call a function and fill in the parameters based on an array and it's length?
is there a way to refer to all movie clips on the stage or apply a function to all movie clips without applying the function to all manually?
View 3 RepliesUse Flash CS5 (and AIR, though this does not seem like it would be AIR related) in Win XP 64 I have a MovieClip symbol in my library with the identifier 'Puzzle10Piece10' with the following actionscript attached to frame 1 of the only layer with the following actionscript:
[Code]...
This runs contrary to my understanding of the pre-compiler and code execution order. In my way of thinking, any reference creation and related memory allocation is made when the object is instantiated, and indeed that allocation, unlike C depends not on code order (declaration before use), though this is an order that would satisfy even the C pre-compiler. If I understand the Flash compiler at all, it's not even a question of 'code order'... the symbol is pre-compiled such that for it to exist... for it to be instantiated, the variable would exist before the function would even be 'available' to be called internally or externally. Is my thinking way off, or is this a bug?
I have an AS3 program that calls a function multiple times. The function must return multiple variables, so I created a class for the function to declare an object containing all of these variables. For example, here's my class:
package
{
public class PER
{
[Code].....
Let's say the calling program calls the function, which returns the variables into data_set1 (where data_set1 depends on input variables arg1, arg2, arg3) using:
var data_set1:PER = function_name(arg1, arg2, arg3);
The calling program does some stuff, then calls the function again, but returns the variables into a new variable name, data_set2:
var data_set2:PER = function_name(arg4, arg5, arg6);
My intention is that data_set1 and data_set2 are different (e.g. not linked together).
My question is, given that arrays are passed by reference, will data_set1 be modified to agree with data_set2 upon the 2nd function call? Why or why not?
I'm doing a basic site with frame labels on the main timeline whose name corresponds to the btn names. A simple otoAndPlay(evt.target.name); I have a basic navigation setup of 7 mcs with mouse eventlisteners for CLICK, ROLL_OVER and ROLL_OUT.
Example:
prepare.addEventListener(MouseEvent.CLICK, navigate);plans.addEventListener(MouseEvent.CLICK, navigate);retire.addEventListener(MouseEvent.CLICK,
[Code]....
Does anyone know a better way to do this so when my mcs are clicked they display the rollover content/art? In essence I'm trying to achieve that when the user clicks a btn it goes to that "page" and the corresponding btn stays highlighted. Pretty standard web navigation technique but I just don't know what the best way to do this in flash is and with how my site is setup.
I'm using this code to call a actionscript 3 function through javascript
[URL}
and I want to call the acrionscript 3 function from a javascript function, but not on a button action.
actionscript code:
//call to javascript
ExternalInterface.call("sendToJavaScript");
//call from javascript
[Code]....
I am working with AS3 to build a very simple mp3 player on my site. So far the play and pause button work fine, but when I try to move the slider then click the pause button, it doesn't pause, and then clicking the play button again causes it to play a new file.I'm assuming that for some reason when I call the playMp3 function from my MouseEvent, it's within an object or something and not at the root, so it's like loading a new sound file, but I don't know how to fix that.URL...
View 2 Replies