Flash :: Add Image From Library At Specific Coordinates?
Apr 20, 2011
I have 500x500px images in my Library that I want to load to a specific set of coordinates. I've found various hints on how to insert images programatically, but none state how to insert to a specific location.Currently, my code goes something like this:
var image:Bitmap;
switch(conStyle){
case 4:
var chart:IF= new IF(); //Flash CS5 doesn't need the dimensions passed on
image= new Bitmap(IF);
}
However, this sets the default location to the upper left corner. How can I set the xy coordinates for the image to be displayed at?
View 1 Replies
Similar Posts:
Nov 30, 2009
I know that the question may seem very easy. I am trying to display an image on canvas.I need to do it in AS, and also I need to locate image in specific coordinates.
View 2 Replies
Nov 19, 2009
Im going to attatch the fla on here...I am also going to give you the script viewable here...im completely a beginner so i made my self notes
also this is not all my coding im just learning off of it to create my own project... What coding would i use to tell the mc to stop scrolling once it reaches a certain x coordinate? for example x=0 (left side of stage) or x= -484 which is when right side of picture is at right side of stage... and can i setup math for it to automatically determine the correct x coordinate (based off mc width) to stop at?? if there is easier scripting to do the same....fill me in
oh and x is off of the stage typically...this is panoramic pics im scrolling
[Code].....
View 2 Replies
Jul 16, 2007
I have a sinlge movie clip that I need to have appear at specific x,y coordinates during the course of the entire movie. I could do this the hard way with the timeline but I was wondering if there was an action script methid of doing this.
View 3 Replies
Mar 8, 2009
I have menu.swf which loads an external SWF (longmenu.swf)longmenu.swf has a long background on stage, which scrolls according to what the user clicks. It works fine on it's own with tweenLite. But what i need to do is to have menu.swf controls to which part of the background it scrolls or appears at once an item on menu.swf is clicked.
View 1 Replies
Jul 23, 2004
I modified the falling snow to move upwards to make bubbles, but now I want them to come from a specific spot from movie clip which is moving constantly and roating. They also have to stay within the bounds of the water. I tried placing it on the spot I want on the movie clip, and alter the code like so:
Code:
onClipEvent (load) {
//variables that will modify the rising bubbles
[code]....
View 1 Replies
Jul 23, 2004
I modified the falling snow to move upwards to make bubbles, but now I want them to come from a specific spot from movie clip which is moving constantly and roating. They also have to stay within the bounds of the water.I tried placing it on the spot I want on the movie clip, and alter the code like so[code]...
View 1 Replies
Aug 18, 2004
for a menu i use 3 MCs, when you click one of them, the two others MCs will make place for the 'options' of the clicked menu. What i want to do is give a specific _x and _y coordinates for the menus to move at when the other one is clicked (start and arrival, and have a motion tween between them). see what i mean?
View 4 Replies
Nov 12, 2009
I have 35 movie clips named mcMyObject1, mcMyObject2, etc. to mcMyObject35Each time the playhead enters the frame this code sits on, I want all of these 35 movie clips to be placed on the stage in random orderI want each one of these 35 movie clips to land on one of these X coordinates: 57, 187, 317, 447, 577, 707, 837 and on one of these Y coordinates: 53, 183, 131, 443, 573. (It's a 7 x 5 grid)Movie size is 1024 x 768Here's my code, which doesn't work:
stop();
var myXArray=[57, 187, 317, 447, 577, 707, 837]; //cordordinates for x
var myYArray=[53, 183, 313, 443, 573, 573, 573]; //cordordinates for y
[code]......
View 8 Replies
Aug 4, 2009
would like to be able to click on a specific image and set specific URL-address. Here is my code so far;
HTML Code:
function loadXML(loaded)
{[code]....
View 1 Replies
Jan 4, 2011
My image is a 72 dpi png file with sharpen effect , when i use [Import to stage], the image imported in the library get blurred( eye-realizable), but the image on the stage keep original quality(not blurred).I have try change library item properties ( lossless png..etc),import again but no thing different.
How can i make the library item have same quality as the image on the stage?(when i drag library item to the stage it's still blur , except the image on the stage create by [import to stage], also tried with jpeg but nothing different)
View 1 Replies
Aug 6, 2010
Is it possible in flash to get a specific frame in a flv video as a bitmap or an image.?
i saw an example of it online but as the comments said it didnt work and some said that its not possible.
View 4 Replies
Feb 15, 2010
I have an .fla file with 1 image in the library and 1 .as file.I have linked the image up with the Class name of libraryImages and Base class is flash.display.BitmapData.This is my AS:
package {
import flash.display.Bitmap;
import flash.display.BitmapData;
[code].....
View 1 Replies
Jun 7, 2010
I would like to write a python script that takes a bunch of swf files and renders them to individual image files.Each swf file has just one frame (text, pictures etc.) and no animations at all. I have already tried the render command from the swftools toolset (The windows version), but the resolution of the resulting image is too low.So what I need is:Acommand line tool (Windows/Linux) or a python library which renders one frame from a swf to a bitmap or better to something like a PDF (It would be cool if the text data could be retained). It would be great if the target resolution/size could be set manually.
View 3 Replies
Apr 20, 2011
I need to have X,Y coordinates of mouse cursor, traveling in a flash window, written in AS3. For example, I saved an image in flash swf format, opened it, when I rollover the mouse on image,
View 3 Replies
Oct 3, 2009
I want all my libray object that are classes to load on frame 2 except for one which is the preloader class I want this to load on frame one.
I can go into my publish setting and set frame two for all the classes to load, but then my preloader class isn't available until frame two.
can I write a line of code that will make the preloader class available on frame one instead?
View 2 Replies
Sep 16, 2011
I have a series of PNG files I need to use in a Flash project.Usually I bulk load my PNGs via an xml or json page.I'm just wondering, what is the difference between loading PNG files this way and adding a PNG to the stage via the Library (say, if you imported a PNG file to the library and then added it to the stage via Actionscript OR if you just dragged it on the stage)
View 2 Replies
Oct 17, 2011
I simply want to build a slide show from 80 images in my library.So my problem is to create instance of each image(mc) from the library to the stage using a loop
View 1 Replies
Mar 10, 2012
I need to load (dynamically) an image stored in the library of Adobe Flash to the loader component. So far, i have imported this image to the library and exported it to ActionScript under the linkage section. I have named its identifier as well.
I am using ActionScript 2.0.
View 1 Replies
Apr 16, 2007
I'm trying to test something out in flash with XML and waswondering if anyoone could point me in the rght direction of atutorial.I'm working on a project where I need to be able to pin pointseveral shots that were taken on a golf course. I Need to be ableto load in several jpegs and then on these plot the points at whichthe ball landed.I know this can be done using XML to load in the images buthow do I go about then ploting points over the top of the image
View 2 Replies
Jun 8, 2009
I've completed the tutorial to create a photo gallery using flash and xml, and have gone on to add the thumbnails. Everything works as intended, but now I would like to add another feature... I'd like to highlight the thumbnail that coordinates with the current image (maybe at 100% alpha while the others are only at 50% or something along those lines). Any suggestions, building off of this:[URL] ?
View 1 Replies
Feb 8, 2010
Everytime I'm trying to drag an image from the library to the stage, the program crashes. I've been sending the crash logs to Adobe many times, but never got any solution from them.
In the log there a line that says:
<crash exception="EXCEPTION_ACCESS_VIOLATION" instruction="0x0c4feb66>
I'm working with 10.0.2, I thought the latest update will fix that, but it doesn't. Changing the UI from Essential to Classic doesn't help
View 6 Replies
Sep 15, 2010
I am using TweenMax to animate the z coordinates of a movieclip containing vector type. So far I've only done a super-simple pan out/zoom in, but I feel like I must be doing something wrong because the type looks awful when it's zoomed out and in. I would think that a vector object should look great at any size, but its very pixilated.
[URL]
Code: Select allimport com.greensock.*;
step1();
function step1()
{
TweenMax.to(mc_z, 1, {z:5000, delay:1, onComplete:step2});
[Code]....
View 3 Replies
Oct 19, 2010
I'm importing an external image, but by default the anchor point (coordinates 0,0) for the movieclip it loads into is the top left,this is obviously an issue if I want to rotate, as I need coordinates (0,0) to be the centre of the image, not the top left?
View 2 Replies
Dec 19, 2011
I was trying to convert global coordinates to local coordinates of a UIComplenent in my flex project using below code using below code
var gp:Point = new Point(e.stageX,e.stageY); //global point
var lp:Point = uic.globalToLocal(gp); //local point
uic is UIComponent in which I have subclass of Sprite for drawing something I have set the sprite's mouseEnabled and mouseChildren to false to not interrupt the mouse event. above code is within uic's mousemove event where I was tracing the gp and lp gp was giving correct value and suprisingly lp was giving negetive values. when I move the move to the top left corner of uic i expect lp to be 0,0 but it is giving the -width of of uic. I broke my head for hours and ended up finding an alternate by using offsets. Infact my original code was much simpler like this which was same issue
var lp:Point = new Point(e.localX,e.localY);
I am not sure what exactly is causing this problem. the workaround had lot of issues and it creating a mess in my rest of the algorithms.Just now I found even more interesting thing (which is actually weird). for some reason I went and create a new lp2
var lp2:Point = new Point(e.localX,e.localY);
now surprisingly it was giving correct values as expected and I went back and changed the code as
var gp:Point = new Point(e.stageX,e.stageY); //global point
var lp:Point = uic.globalToLocal(gp); //local point
var lp2:Point = new Point(e.localX,e.localY);
var lp2:Point = uic.globalToLocal(gp);
now it is expected to have all the lp, lp2 and lp3 variables to be same but weiredly lp two is giving wrong value and lp2 and lp3 were giving correct. I am suspecting using the variable lp has something to do. I am not sure about that but above proves it so right now I am using lp2.
View 1 Replies
May 21, 2007
I was reading the 'Isometric Transformations' tutorial by Danko Kozar and I have a few questions. I understand what all the code does, but not how it does it. First of all, how does the following code work:
transforms x,y,z coordinates into Flash x coordinate
xFla = function (x, y, z) {
// cartesian coordinates[code].....
I understand that it converts 3d coordinates to 2d coordinates, but I don't understand how. What numbers whould be punched into x, y, and z to acquire certain desired effects?Also, what's the difference between moveTo and lineTo:
red line
style(1, "0xFF0000", 100);
plot(0, 0, 0);
draw(200, 0, 0);
View 4 Replies
May 3, 2010
Im making a little app in flash using papervision I want to make a regular movieClip show up in the same place as a papervision object. The coordinates seem like perspective is affecting the number displayed.
View 2 Replies
Sep 15, 2010
how do i export specific frames not all frame. ex: if flash has 1 to 200 frames. here i want to export 51 to 150 frames as a movie. if there is any command or plugin to export movie like this.
View 0 Replies
Jun 6, 2010
I've got a project thats getting a bit big, so Im taking the actionscript out into separate as files. I want all the basic functions to be in BasicFunctions.as and the make a library for more specific functions. I find that a lot of people use the import statement but I cant get that to work with a simple Hello World trace, yet the include statement works fine (see attached). I understand that import/include work differently, but which is the better method? If import, then is that heavier to work with. Any rate, what's the best way to organise code when it gets to the 1000+ lines?
[Code]....
View 9 Replies
Nov 13, 2010
it is said [URL]You can download the JSON library as part of the core ActionScript 3 library.but when clicking on the link it doesn't work
View 1 Replies
