I want to have a movie load and play in the timeline, when a frame is entered. I know about the enterFrame function, but don't know how to apply it.
View 9 RepliesThis is for a website with seven frames (one page per frame)
I can load the gallery .swf in background but I only want it to show up on frame 7 (gallery button). Then if the user goes anywhere else (eg. home button - frame 1) the loaded gallery .swf disappears.
I can load it and make it invisible, and can make it visible on frame 7 but then it's visible when you navigate anywhere else.
This is the load code on entering frame 1:
stop();
//make gallery invisible in this frame
stage.addEventListener(Event.ENTER_FRAME, invisible);
function invisible (event:Event):void
[Code].....
Say on frame 100 of my timeline on my layer movie, I want to load a clip. What is the AS that I put in the keyframe 100?
View 2 RepliesI have a main flash file that I load various external swf files into. On the first frame of the timeline, there is an intro swf loaded that basically welcoming the viewer to the site. What I want to do is have this load, play and unload and then go to frame two of the timeline where the main home section of the flash site is located.One my first frame on the timeline I have:loadMovieNum("/IntroMovie.swf",1);stop();n the external IntroMovie, I have unloadMovie (1); so the movie will play and then unload itself. What I can't figure out is how to get the timeline to go to the next frame once this movie is finished playing and has unloadedIf I don't put the stop in there, it simply skips this movie and goes to the next frame on the timeline and loads the home movie swf file.Is there a way to use some sort of if statement, that if the movie is unloaded, goto the next frame, sort of like this:if(code to verify if movie is unloaded);gotoAndStop(2);
View 4 RepliesI have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
i have a mc in wich timeline i put (manually) a mc called joe_mc. The first one (the container) holds all the code: A timer function slows down joe_mc and when it reaches its last frame its suppossed to play the next frame on the container mc timeline. Here�s the code:
[Code]...
how to play the timeline with a simple button
example:
in AS2 you could attached script to button something like
on MouseEvent {
gotoandplay(6);
}
thats all I am trying to do, but in AS3 how do I simply get a button when clicked to go to a frame and play.
I'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys.The user can hold/press "keypress right" to move to the next (key)frame and "keypress left" to move to the previous (key)frame in the .flv files.I have tested embeeding one .flv movie to the stage and it's working fine.But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween keyframes in the same way if the .flv's are loaded dynamiclly? Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
View 1 Replieshow to play the timeline with a simple button
example:
in AS2 you could attached script to button something like
on MouseEvent {
gotoandplay(6);
}
thats all I am trying to do, but in AS3 how do I simply get a button when clicked to go to a frame and play.
I have a stop play button but it freezes play as opposed to what I require which is returning cursor to frame 1 to then await the next button click when an animation would play again.I currently have code for the button as :-
on (release) {stopMovies(this);function stopMovies(mov:MovieClip) {for (movs in mov) {if (typeof (mov[movs]) == "movieclip") {mov[movs].stop();stopMovies(mov[movs]);}}}}
I have tried everything but it just isn't working.On my main timeline I have a MC called "rainbow." Inside "rainbow" I have a MC called "greenbow."Inside "greenbow" I have a MC called "meetbtn2" I want it to play frame 134 on the main timeline when you click "meetbtn2."my code inside greenbow is as follows:
meetbtn2.onRelease = function () {
_root.gotoAndPlay(134);
};
however it doesn't work! is it because i am inside two MC's?I have also tried
_root.rainbow.greenbow.meetbtn2.onRelease = function () {
_root.gotoAndPlay(134);
};
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I have two embedded flv's in the timeline, one after the other. There are no errors in the video files. When the "playhead" in the exported swf comes to the end of the two combined videoclips, it jumps back to the first frame of the 2nd video clip for a fraction of a second, before playing from the start of the timeline as it is supposed to. I have explicitly done a "gotoandplay(1) in a separate action layer, at the last frame of the "movie", but that's not what happens.
View 0 RepliesIm trying to tell my movie to goto and stop on anoter frame on my root timeline and then play a movie clip on the new frame... This is probs really simple but it is early.
[Code]...
I have an image scrolling setup like in itunes, however I am unable to click on the images to play a frame in my timeline (i.e. I�m going to click on one of the revolving pictures, which change to another frame, enlarging a square on the page which contains information). So every image that is rotating enlarges a square at the bottom. What changes do I have to make in order to do this. Below is the action script:
[Code]...
I'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys. The user can hold/press "keypress right" to move to the next frame and "keypress left" to move to the previous frame in the .flv files.
I have tested embeeding one .flv movie to the stage and it's working fine.
But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween frames in the same way if the .flv's are loaded dynamiclly?
Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 Repliesi want my button to delete if a certain frame plays...how would i do this?
View 2 Repliesi'm looking for a script that tells the timeline to start to play frame 25, after 5 seconds.i've found a few codes online but cos they are for different purposes, i just cant seem to custom it to work accordingly.
View 5 RepliesWhat was simple is now documented by 15 pages of chicken scratchesI have searched through the docs and am just lostWhat I want to do was simple enough in AS2: onClipEvent (EnterFrame)_root.gotoAndPlay("2");But can't be done now. It doesn't work as a frame action either without the onClipEvent. All I want to do is go from the last frame of the timeline to frame 2 and skip the preloader. How the heck do I do that in AS3? I've searched online and cannot find the method, and perhaps search terms don't work. Anything I can find applies to AS2.
View 12 RepliesI need to a keyframe to pause (for say 20 seconds) when the frame is entered (i.e. not a button press, etc). After the 20 seconds is up, i need the timeline to continue playing to the next keyframe. I've searched and searched for setinterval and the like, but i could not find a clear answer.
View 14 RepliesI am currently in the middle of making a "sniping" flash game. In the first level there are a series of moving targets which are also movie clips. Inside the movie clip there is a 7 frame animation of the target exploding. Inside that is a tween of the target moving up and down. And inside that there is a plain old button.
What I want to happen is when you click on the moving target it explodes and brings you to a new frame of the main timeline. (ex. Main Timeline frame #27) But I'm pretty sure it thinks I was to play the seven frame animation of it exploding and then go to frame 27 inside the movie clip, rather then frame 27 on the main timeline.
Here's what my AS looks like on the target (ActionScript 2.0 is what I'm using.)
on (press) {
play();
}
on (release){
gotoAndStop(27)}
So how do I make it explode and then take me to frame 27 on the main timeline?
How do I link a button thats embedded in frame 2 (music page timeline) to a frame in the main timeline ( frame 3= biography page)? Both pages are on the same scene with link buttons embedded in each page independent timeline.
View 1 RepliesI want to play the movie in the timeline, so i dont have to export the file every time i want to see the movie clip.
This is a school prosject so please respond quickly.
I'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
View 1 RepliesI've created a movie clip symbol with it's own animation on its timeline. I've placed this symbol onto the first frame of the main timeline but when I test it, it doesn't play. There's no stop actions or anything on either timelines so I'm not sure why this is happening. I thought that the animation in a movie clip symbol will automatically play (i.e. if you test in a browser) once it's on the main timeline - is this right? Or am I doing something wrong. Maybe I need to tell it to play?
View 6 RepliesIs it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.