I made a movieclip with 5 frames inside. Well, outside, when i push a button stop, runs the code: this.movieclip_name.stop(); , but, doesnt stop. Inside these frames there is a enterframe function that call drawing api functions.
View 1 Replies
I coludnt stop the function after n=>5 . I tried removeeventlistener. it didnt work. the code is giving error each time it enters a new frame.[code]...
View 3 RepliesI created an full flash template website loading external swf.Lately, I managed to add a fake3D rotation with AS3 and CS4 to this global template with an enterFrame.some of my external swf use a vertical scroller also using an enterframe function base on the x / y position of the mouse, the scroller dont work anymore.Can't an enterframe swf loads another swf with enterframe function?
View 4 RepliesI wasn't sure how to name this thread to well. Here's my funk: I have made a photo slide show and all works well for browsing and viewing. Where I got stuck was when I tried to write code that would center images that were vertical. This is the entire code on the empty mc that has it preload, display then adjust the x of the image. Now, with this code if the image is vertical it flies off the right of the page. haha. sounds fun eh?
[Code]...
I am trying to figure out how to get an enterframe event listener to stop. I created a simple example below, where a line spins around on stage until the user clicks on it. When they click on it, the user should be jumped to frame 2.
Code:
stop();
stage.addEventListener(Event.ENTER_FRAME,rotateIt);
line_mc.addEventListener(MouseEvent.MOUSE_DOWN,goSomewhere);
[code].....
However, when I run that code, I get the following error:
at test_fla::MainTimeline/rotateIt()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
Which tells me that the event listener is not being removed. I also tried putting the removeEventListener code on frame 2, which didn't work either.
how do you call an onClipEvent(enterframe) of a movieclip to happen when that movieclip is pressed?
[Code]...
when i type this in i get an error because on events cannot be nested within other on events. how can you get around this?
I have a function that running on ENTER_FRAME inside another function that is called once on COMPLETE. I need to stop that ENTER_FRAME later on in the timeline. Here's the basic code:
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, startListener);
function startListener(e:Event):void
{
var mySprite = new Sprite();
[Code]....
So you see when myLoader is COMPLETE it creates mySprite that is an ENTER_FRAME and continues to run the function playerBarPos. The function playerBarPos then traces over and over again "this keeps going and going". How do I later in the timeline stop this?
how to remove children and Enterframe function from my carousel ? See code below:
ActionScript Code:
function createGallery(voteImagesArray:Array,voteNamesArray:Array,gallery:MovieClip):void {
[Code]....
I want to navigate to the next frame without the images playing in the bg.
I have a whole bunch of onClipEvent(enterFrame){} events going on. Would taking all that code and putting it into just one mc's onClipEvent(enterFrame){} function lower cpu usage? What is a good way to have enterFrame functions die if not needed?
I have 5 nav buttons. The first two have sub sections. (1st one has 2 elements, 2nd one has 4 elements). The way I set it up, each of these buttons checks on the _y position of the button below it. I then use a move function with inertia to move the bottom button, and all buttons on top of move along with a springy feel. Also, when these move, I show the 2nd frame of each of the buttons in the corresponding section, for it shows the text of each button. This is the way I am doing it right now (By setting everything in one enter frame function it seems to run a lot smoother than when each element had its own enterframe function for just one line of code):
Code:
onClipEvent (enterFrame) {
_parent.link1_1._y = _parent.link1_2._y-20;[code]....
I have a game and i use function gotoAndStop in actionscript to play frame "moving" in my character game.And in this frame have movieclip. How can i detect when movieclip inside frame "moving" end ?
View 1 RepliesCode: Select allMovieClip.prototype.play2 = function(direction, playback, begin, end, callback, clips) {
var o = this;
playback = (playback == undefined) ? (1000/24) : playback;
[Code].....
I have tried the same commands for onClipEvent (mouseUp) aswell!
Do I need to add something in the MovieClip.prototype.play2 = function???, or what is the correct approach.
I have been making a simple aplication and i have a problem i cannot find the solution (neither why it is happening) The thing i want to do is to dynamically add a canvas containing a button to the application and then i want the canvas to be moved from the left side of screen to the right. So i have made the following code
[Code]....
If i have a series of variables that are referenced on an enter frame function, is it better to declare the frequently used vars at the class level? Is there a performance benefit? What is the standard?
Example
[Code].....
I built a custom designed checkBox. The movieclip is in the libary and dragged onto the timeline of my .swf. I'm using CS4 & AS3. I'm using procedural AS3 instead of OO AS3.The checkbox movieclip has a child movieclip inside of it so I can apply a drop shadow filter to some of the graphics .When I put an eventlistener on the custom checkbox it works fine but when I try to reference the checkbox movieclip inside the eventlistener function, the event.target.name is referring to the child movieclip (just a graphic with a drop shadow filter).From my reading it looks like the function propogates down to the child movieclip but I don't want it to do that.How do I reference the parent movieclip? or
B. stop the eventlistener from propogating down to the child movieclip?
I tried using stopPropagation(); but it didn't stop the function event.target.name from trickling down to the child movieclip.Here's what AS3 looks like.The trace statement displays "step3_mc.cbEmail_mc.instance25"instead of what I need "step3_mc.cbEmail_mc"
step3_mc.cbEmail_mc.addEventListener(MouseEvent.CLICK, fnc_cbClick);step3_mc.cbAgree_mc.addEventListener(MouseEvent.CLICK, fnc_cbClick);
function fnc_cbClick(event:MouseEvent):void {[code]....
I'm still finding my way around even the simplest things in Actionscript. I have a movieclip named 'leaf9' in which I'm using as a button (which happens to be within another movieclip). I have the following actionscript on the frame which contains 'leaf9':
[AS]
leaf9.onRollOver = function(){
this.gotoAndPlay("rollover");[code].....
What I want is for all the other functions to go away once "shrink" has started to play, so that if the mouse goes over the button again, the clip doesn't start playing "rollover" etc etc. So how do I stop all the other functions from playing once the .onRelease function has started?
My problem is pretty simple, but I'm still finding my way around even the simplest things in Actionscript. I have a movieclip named 'leaf9' in which I'm using as a button (which happens to be within another movieclip). I have the following actionscript on the frame which contains 'leaf9':
[Code]...
What I want is for all the other functions to go away once "shrink" has started to play, so that if the mouse goes over the button again, the clip doesn't start playing "rollover" etc etc. So how do I stop all the other functions from playing once the .onRelease function has started?
I want to run a function when a certain movieclip enter a specific frame. The problem is it run the function repeatedly. I only want it to run once each time the movieclip change from one frame to another is there an event Listener that does it ? (can't put the code on each frame of the movieclip to sloppy and long)
View 0 RepliesI have an enterFrame action that I use on a graphic:
[Code]....
Because I want to use the above code more than a few times, I tried to make it a function.
[Code]....
But for some reason the function call does not work when I call it via an action on a graphic where initially the code worked when it was explicitly written and not called as a function.
Code:
onClipEvent (enterFrame) {
fadeOut();
}
I have a function that states when movieclip1 is dragged and hits a line then it stops the drag, however it seems to stop the entire drag function in the swf on the other movieclips even though they arent called in the function.[code]
View 1 RepliesI've tried a couple dozen things to try and stop this movie clip, even down to the bare bones basics and its not working.I have an imported TIFF sequence that i imported onto the stage of a movie clip. Its 73 frames long, i want it to stop on frame 73.So i add the usual stop(); command but it doesn't stop, it keeps looping.On the main layer i put this movieclip in i have an AS layer that also has stop(); and moviclip.stop();But it doesn't stop at all. it just keeps repeating.I put it down to this bare basic setup just to see if i could even stop it. But its not stopping.Layers -> and stuffScene 1Content - movieclipMCActionScript - stop(); movieclipMC.stop();Movieclip - keyframes consisting of image sequence 1-73. frame 73 has stop();
View 1 RepliesI have some bombs like this :
var sjunkBomb:Array = new Array;
for (var i:int = 0; i < sjunkBombMaxAntal; i++) {
var bomb = new sjunkbomb;[code]....
Each movieclip sjunkBomb contains an animated movieclip. When the bombs reach the bottom I want to stop the inside animation.I guess it's better to stop them so they affect the rest of the game if there are a lot of bombs. I know how to hide them with sjunkBomb[x] .visible = false; but if I want to stop them? sjunkBomb[x].stop(); doesn't work!?
ActionScript Code:
myFunct();
function myFunct()
{
[Code].....
Any way to get this to work without using much more code? This is for a function that checks to see if a user is still logged into a website. I need the check to happen every time the user causes certain functions to run, like create topic, submit new post, etc. I could put the code, which is only a two-liner if/else statement in every function, but it would be nice to just call a single function. But that function would have to be able to cause the function that's calling it to return to get it to cease.
I have a movie clip that scrolls side to side when you rollover it but when the mouse is off it continues to scroll - I need the movieclip to slow to a stop when the mouse rolls of the movieclip. I've have been playing arounds with the hitest code (red) but this does not fix it... Its prolly a simple problem - I am not much of a coder....
[Code]...
i'm trying to get a movieclip within a movieclip to stop playing when it reaches its last frame. let me describe my problem: it should start playing when the user rolls over the movieclip that is containing it(i'll call this mc1, and the movieclip within it mc2). i've put a stop action in mc2's last frame but it won't stop and plays again and again. one thing i should point out is that there is a variable in mc1 that tells the movie whether it's ok to play the movie in reverse when the user rolls over mc1, if this is false, that means that it plays normally(not in reverse). i'm using "play()" to play mc1 when the user rolls over it and this is where i think the problem is; even though the last frame of mc2 has a stop action, it is somehow told to play again? anyways, this is just a guess, i haven't figured out why or how to fix it. i'm not sure if my explanation was too hard to understand so i'll try to clarify it if anyone wants me to.
View 1 RepliesI am trying to stop an if function from happening if a dynamic text box equals '1'[code]...
I now want it to say that if the dynamic text box equals 1 then the _x and _y do not change.
I have this function:
[code]...
How can I stop it trough a button?
I'm using this timer code for my game.
It should play 10 seconds and then go to the next scene.
PHP Code:
function timer(){
seconds=seconds-1;
if (seconds < 0) {
[Code].....
Well that works, but when I click on the play-again-button in the next scene, it won't play for 10 seconds (but less). I think the timer goes on without stopping. How can I stop the timer function when I move to the next scene?
I have two functions, both are puting objects on stage and few seconds removing them, after decent of period of time mc steps to 3 frame where movie should stop, but those objects still appear on third frame, but I don't need them there. How to stop those functions?
View 5 RepliesI have a function that I want to run at an interval within a frame. I use the following code to start the function:
var intervalID = setInterval(intervalFunction, 3000);
Then, in a button's onRelease I want to stop the function. In the onRelease, I make a transition to another frame.
btn.onRelease = function()
{
clearInterval(intervalID);
gotoAndPlay("nextframe");
}
The intervalFunction continues to execute.
I have a slideshow made up of about 21 photos and each one is on a different layer and each has a fade in and out transition applied to them. I want to be able to stop the slideshow when a rollover occurs. I've tried various types of code and none of them get close.
View 0 Replies
