Do you know is it possible to start iPad application from another application that is developed in Flash? I need to create small iPad app with two buttons (and some graphics/animation) in Flash. Clicking on those buttons, another iPad application should be started. My guess is that will use ExternallInterface, but I don't know what to send :)
View 1 RepliesI am using Flash profassional cs5 and want to create an iPad application but it only allow to make iphone application. It allows to install on iPad but the resolution is very small.
View 1 RepliesHow to call flash file in ipad application. Is it possible or not? Is there any way to call flash file in iPad application?
View 2 RepliesI am Adobe Flash DesignerDeveloper and i ended AIR Application for desktop and need to know how to launch this app on iPad?
View 1 RepliesI'm new to developing iOS applications and my school gave me approximately 5 months to develop an iPad application. I have no knowledge or practice on Objective C so since Flash Builder 4.5 allows the development of mobile applications (and I have experiences with Flash Builder), I decided to develop my application on Flash Builder instead.
Everything is going fine until I was told to include a SplitView in my application. I implemented a List on the left side of the application. Clicking on any of the list items will navigate the user to a to another view but i also included and retained the list on the left side of the new view in order to simulate a "SplitView".
Initially it felt as though it will do the job of a SplitView like how it does when I attempted it on XCODE but it doesn't look or feel natural. I found this video which shows that it is possible to create a SplitView on FB but I've cracked my brains and I really can't figure out how it is done.
[Code]....
We have an AIR application running on an Apple iPad, that occasionally experiences sudden drop in its performance. The frame rate drops from 60fps to 2fps and it never recovers from that. this is only reproducible on iOS 4, but never on iOS 5 - we've checked that on two identical iPads (generation 1)the performance drops occasionally, but always happens when we switch between apps - from our app to another and back very rarely, the performance drop also happens on first start of the app this performance issue does not happen in renderMode=CPU, but this mode doesn't work for us, because the rendering is ugly, especially on rotated bitmaps.
View 1 RepliesI'm currently trying to develop my Flash animation to the iPad, however no audio plays...I'm currently using ActionScript 3 to make the audio appear instead of using the timeline, but even if I use the timeline the audio just doesn't play. The file itself is an mp3, and information on the iPad says that it should be able to play on it.
I have a really bad feeling that this is a Flash/iPad issue and it hasn't been resolved yet. Does anyone have any idea why? I really can't figure out, because it's not like there's an audio option before you publish the application...
How to run the Flex application in the ios.
View 2 RepliesI have made one one mobile application in flash builder using flex mobile project I have a question that "why size of an .ipa file is large as I export a mobile application as iOS application.???? in compare to that same application for android takes small size!
View 1 RepliesI have an AIR app that gets bundled with XML files that the app needs. These get put into the APP Storage Directory, of course. Works great. But when I install a new version ( which includes new XML files) , the new files don't get added or overwrite the ones from the previous version. It seems that if that directory is there from a previous install, the installer will ignore the part where it moves included files.
View 1 RepliesI am creating an application. At one view I have three states. If I changes state and than back button pressed it unloads the application.I am developing it in Adobe AIR.
View 1 RepliesI want adobe sockets to send "customized" class object to a server socket(WinSock2). I used socket.writeObject(myClassObj). Actually My flash application and windows application works for string buffer but not for object.
Code:
//Flash
var buffer:String = "God Bless Us";
socket.writeUTFBytes(buffer);
// WinSock2
iResult = recv(ClientSock, recvbuf, recvbuflen, 0);
Is there anything I must do before writeObject() is used.?
Currently i'm developing a facebooks apps with falsh application. i've have completed the development with all API required to run a facebook apps. Everything went well and it's live now. My question :
1. How can make user to go directly to the application page everytime they click the link posted by user who already use the application instead going to the canvas page applications. i'm been trying to look for the article that support saying that user will go directly to application directly to canvas application page instead of going to the application page.
I need to make my Flash application create a connection to a remote application and have the remote application send periodic updates to my Flash animation. The remote app is written in VB 6, and does not support XML sockets. However, I don't need the ability to send or receive XML since I am going to be overriding the onLoad() event anyway.
Or maybe I do need that ability... I'm having trouble getting my onLoad() event to trigger. Right now I'm just testing the onLoad event like this:
[code]...
So, basically I'm trying to find out how I can format the data I'm sending it so that the onLoad() event triggers. I've read that the XMLSocket object listens for the Null byte, so perhaps the data I'm sending it doesn't terminate properly. I need a persistent connection from Flash to the VB app because the VB app will be the one initiating the updates to the Flash application. Is the XMLSocket the way to go here, or is there another class of objects that I'm missing?
Is there any application which can relay another application on Flash Media server? For exmaple I have a "live" application on the server. I want another application, "liverelay" which can basically relay what is coming on the "live" application. Is it possible? If so how can I implement it? Looking forward to a response.
View 12 RepliesI'm trying to connect a AS2(swf on Flash player using Flash CS4) and AS3(swf on AIR using Flash Builder 4), but I get an error when I send a command from the AIR app:
[StatusEvent type="status" bubbles=false cancelable=false eventPhase=2 code=null level="error"]
How can I debug this?
I want to use vkontakte's new wrapper feature, that enhances your application abilities by running under SWF wrapper. This is a sample application that uses this mechanism. It uses pure action script to display it's contents rather than an mx:Application.
Using the wrapper on my mx:Application failed due to the following error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at mx.managers::FocusManager/activate()[C:autobuildgalagaframeworksprojectsframeworksrcmxmanagersFocusManager.as:702]
at mx.managers::SystemManager/activateForm()[C:autobuildgalagaframeworksprojectsframeworksrcmxmanagersSystemManager.as:2493]
at mx.managers::SystemManager/activate()
[Code]...
Unfortunately - it also failed, and the question remains, how to start Application from a simple AS file?
We're trying to implement a load-balancing mechanism between FMS hosts in a virtual "farm". The mechanism we're using is to have the FMSs periodically send "load" data (along with a timestamp) to an application server. That server will then use that load information and timestamp to detect when an FMS server has gone down and to make stream assignments to FMSs. Right now, I've implemented this code via a setInterval() in live/main.asc.
I've added a "return false" to Application.onAppStop() to (according to the docs, I haven't tested this yet) keep the server from shutting down an idle instance. How do I get the interval running before the first request hits the application (and forces the load of the application)? I've tried putting the setInterval in onAppStart() and as a global. In both cases, it only gets executed after application is loaded. Any way to force an application to load (via a config file parameter or local command-line)?
I've got a configuration xml file that I need to parse for values before a flex application loads. I've created a static class that allows for the values in the xml config file to be retrieved. I'm initializing this class when the application first loads but as the xml file is loaded with a Loader class that loads a synchronously the class is being asked for values before the xml file is actually loaded - so it is throwing a error. Is there a way to load this xml file synchronously. We cannot embed the file as a class variable as we need to be able to change the values remotely.
View 5 RepliesI have strange problem, then I test AIR application in Dev mode - it creates working ServerSocket object. And acts as a server normally.If I package it as AIR app and install on windows it stops working - server is not created on designated port..[code]Or may it be because I am using generated Certificate?
View 1 RepliesI have found some question which refers to my initial question :on xcode Usually resolved in synthesis by :
flushing certificate cache correcting the signing certificate ( using Distribution in replacement of Developper) C checking and correcting the Application ID who was sometimes not the same between the one declared in iTunes Connect and the one in the app.xml file
The fact is that I still has the problem on Flex Builder, which is when I upload my application, it failed with "Application failed codesign verification"
[Code]...
So the question is what could still block the uploading of the application on the App Store?
How to resolve "Application failed codesign verification." when uploading Application, build with Flash Builder 4.6?
I have requirement of web conferencing for my website. for implementing that I have gone through google.Many suggested that go for FMS. I have never worked with FMS earlier.And requirement is urgent.Some people write that u hv to coding in Action Script 3 and I dnt knw Action Script. currently i need one to one conferencing...one to many can be done in later phase.
I m working as a developer from last 4 yrs on Microsoft Technologies. how to go about and is it right decision to start with FMS or any other alternative is there. What tools and which edition of FMS will be required?
I am using the combocheck example from the following site: [URL]
It's a very useful component and works very well.
Now, I need to set the text property of this combo box upon application startup with certain values (which are defined dynamically according to some criteria). The problem is that although I have no problem setting the text property of the combo box at other times of the application run, setting the property at startup seems to have no effect unfortunately.
For example, I want to set the text property of the combobox to "Bob" (which is one of the items in the dataprovider for the combobox) and the "set text" method is called on the combo box. Performing a step-through shows that the "set text" method is receiving the correct value item but not setting the _text property.
I have tried not doing anything until "ApplicationComplete" but no joy there either.
Here is the code (a combination of the code from the URL above and some other changes to it). However, as I've stated above, the codes does work. The problem is that it doesn't work at the application startup. Whenever an event is fired and setComboText is called as a result, the text of the combo box is set correctly.
private function onComboChecked(event:ComboCheckEvent):void {
var obj:Object=event.obj;
var index:int=selectedItems.getItemIndex(obj);
[Code]....
I know javascript, CSS, AJAX, and HTML/ XHTML. I was told to learn these in order to make an application for the iphone. Now what? What/how do I start learning objective-C?
View 1 RepliesWhat is the best way to embed a previously created flash application into another flash application?
View 1 RepliesI will create a voice chat application with Adobe Flex and I want use the opensource Red5 as a server.But, I confuse how to start it. it's possible just use NetStream and NetConnection?
View 1 RepliesWe have an application that works no problems on our server with FMS in test mode. As soon as we enter our FMS license key we get this error: "application is not a valid signed application loading access denied".We removed the license key and it works again, but with user limits obviously, so this is not an acceptable fix.
View 5 RepliesI'm trying to develop a simple mxml Flex application to start Skype from the AIR/Flashplayer runtime. Is it possible to get back events from a native Windows application? In the simple example of Skype, the OS returns control to the Flex app when Skype exits. But what about native applications which have their own event model and wants to communicate with the Flex event model. For example, a Face detection system which shows "Hello" on a Flex app when the camera detects a face. Can this be done in the current Flex framework?
View 1 RepliesI am working on an Adobe AIR Application. The size on Application window is 800X600 and is contains border container and border container contains many controls. What I want is to if user re-sizes the application then that container should also be re-sized according to scale. i.e If user maximizes or minimizes the window then that border container should also be maximized or minimized respectively.
View 3 RepliesHow I will be back in Login Page after click of logout which is in application's component.
Project.mxml
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" width="100%" height="100%"
[Code]....