ActionScript 2.0 :: Set Separate Times For Each Animation?
Feb 21, 2007
I've been trying to do some animation based on setInterval. I pretty much got it working exept for one thing! I want to set separate times for each animation. Se the code below or download the sourcefiles here.
So the problem is that I want the SetInterval time to be the current value from the time array, as it it now I can only set the interval time once here:
ActionScript Code:
txt_obj.onLoadComplete = function() {
intervallID = setInterval(slideIt, time[current]);
};
and never again, what I want is that after each time the slideIt function has run a new value from the time array will be sent to the interval and that will indicate when to run the intervalfunction(slideIt) again..
ActionScript Code:
stop();
import classes.Slide;
//INTERVAL TIMES
[Code]....
View 1 Replies
Similar Posts:
Sep 21, 2009
I have a bunch of external .swf's that I need loaded into my main one, but I need theme loaded at seperate times. Basically I think I need a single screen in the main file that holds a loader in the background and a movieclip place holder in the front. The click from a button in the menu needs to set the swf to be loaded and the screen informations,w here it is then sent to the single frame area to display the screen information, the loading bar, etc. When the movieclip is 100% loaded, it needs to take over the screen in that area until another screen is requested.
View 1 Replies
May 3, 2009
I'm creating a mini site for a course I'm doing and I have a row of buttons that have an image of a character that I want to animate when the viewers mouse goes over them. I'm not good with action script and I'm stumped on what to look up when googling for an answer.
Ideally I would like the row of buttons (that the chacters sit in - and when they are clicked they go to that characters main page) to animate - ie blink or move slightly but when the viewer hovers their mouse over them they then go into a new animated sequence - so I guess that would require two movieclips - so that would mean that the first animation of a blink would run all the time (I can do that bit! ) but how to get it to switch to another movieclip for the duration of the mouse hover - and to only play when the mouse is in that area (I've done scrolling image bars before and I hated the way it scrolled even when the mouse was no where near the images!)
this is a very rough bare bones of the flash page I'm doing - I've attached it to my main website just so others can see what I'm talking about. [URL] all the squares at the bottom will have a characters in them and I want them to do very subtle things like blink or the occasional wave but when someone goes to click on them they wave or jump around - this would stop if the viewer then moves the mouse away and it goes back to the initial movieclip.
View 1 Replies
Apr 1, 2011
I have constructed this animation of a broken up image. If I just use the nested for loop in a new file, it will run normally but when i try to let it run after a TweenLite which has an onComplete function, the animation will be looped 4-5 times. [URL]
View 2 Replies
Jun 6, 2011
I am trying to rotate a symbol on the x axis mulitple times for an animation I am doing. The problem is everytime I try to do a complete rotation, the symbol rotates fine until I hit 180 degrees, but once I go past that mark, the symbol just starts rotating backwards. Is there a certain way I have to do this in order to get a complete rotation in one direction?
View 1 Replies
Aug 29, 2006
I recently got back into animating and I need some help with my latest project. I have a number of different animations that I would like to be played on the inside of a tv, however I would like for these animations to play at certain times. For example, at 9:00 pm (real time) the tv displays the animation of the character sleeping. I'm not sure how to do this, and I'm not sure if I need an internal clock.
View 6 Replies
Apr 30, 2009
Basically all I am trying to do, is place a simple text animation on a separate layer and animate it. Every time I insert the first keyframe on the first character of the text I am animating, it turns the whole document white. When I preview it like this, the white "layer" pulses at the set frame rate I have applied. I have played around with moving the layers and what not and I cant get this problem to go away.
View 1 Replies
Oct 3, 2010
its a door make up of 8 segments, im trying to animate it by making it open and close equaly,each door segment. but my segment is distorting because im doing each one segment bt segmet.is there a way to achieve this in flash?
a):should i copy paste one of the segments into a seperate layer using that one animation i got for all 8 parts?
View 6 Replies
Jan 22, 2010
How can I repeat my flash animation (my frames) many times?
View 1 Replies
May 11, 2005
I have a flash piece that I want to loop 3 times and then stop.
View 2 Replies
Apr 18, 2010
What I need to do is assign 5 separate dynamic text fields to 5 seperate buttons and at the same time to those same five buttons i would like to add 5 images that i would be able to change merely by swapping out the images in the file theyre in on the server.I would also like to get a nice transition between the images...ALSO i want to dynamically load the images for the buttons that will be used for switching from picture to picture(which im thinking i will be able to do after i know the how to do point the aforementioned things.)
Through tutorials I've found around the net I've been able to get most of the parts together... but i get lost because what they show you for AS2 they don't for AS3 and vice versa, at least that ive seen.so... I guess my question is... would i need to set up 5 seperate dynamic text fields on the stage and then set each one of them to one of the corresponding button. If so what AS code would i need to use to do so. And if not what would i need to do?
The other part of the question would be I know about the UILoader... would i be able to use it as my buttons and images, if so would i need 5 seperate ui loaders for both the Thumbnail buttons and the images or is there a way that would be better to do it? and once i do that would i do the transitions using frames and tweens like with AS2?
View 2 Replies
May 30, 2010
i'm new to AS3. how do i go about executing a custom function n number of times and then executing another function n number of times repeatedly?
eg.
function firstOne():void { }
function secondOne():void { }
i need firstOne() executed say 3 times and then secondOne() 3 times and then firstOne 3 times again and so on. i'm trying to move a movieclip 3 times to the left and then 3 times to the right continuously.
View 2 Replies
Aug 19, 2009
If I create a new flash AS3 file and create two blank keyframes in my actions layer I can add actions to each keyframe separately no problem. I can then easily switch between the actions frames from the menu bar on the left of the actions input panel. However if I try and do this on any of my projects i've been working on for a while when I create a new blank keyframe in the actions layer and try to add actions to it, I get sent straight back to my first actions keyframe and not a nice blank page. Can I even apply seperate actions to seperate keyframes?
View 6 Replies
Jan 17, 2011
This is NOT the same as my last thread as i am after three and NOT ONE as last time. In the attached movie there are three seperate movies loading into three seperate tweens. Please note that i am happy with this movie as it is, and do not want to change anything about it except for the script itself. It refurs to three seperate clips "b.a","d.c" and "f.e". What i want is for the script to incorperate all three clips under one name of "mc" And instead of have three seperate widths, "width 1","width2" and "width3" i want the script to also incorperate all three widths and heights into just one name of "width" and one name of "height".
View 9 Replies
Jun 19, 2004
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
View 4 Replies
Dec 6, 2011
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 Replies
Jan 3, 2003
Ok when you press link one it olads great! when i press link 2, it plays the closing animation, but not the entire animation, thats the problem.My closing animation is a red square going from one end to another ( for the hell of it).But you see content number two will load b4 the red square gets all the way across!!
View 2 Replies
Mar 29, 2009
Now I have 2 movieclip. Mc1 & mc2. I planned to to make mc2 do certain animation and user must input the key within the progress animation of the mc2 in order prevent something happen
View 1 Replies
Nov 4, 2003
so I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
View 4 Replies
Aug 13, 2009
I made an animation in Flash which I want to embed in Flex using SWFloader.
I've imported the tweener class (caurina.transitions.*) to tween a rotation. The animation runs perfectly in Flash.
However, when I embed the animation in Flex, the tweening is gone.
Do I need to import the tweener class in Flex?
I use Flash Player 10 (latest version), Flash CS4 Professional version 10.0.02, IE8 and Flex Builder 3.
View 2 Replies
Jan 15, 2012
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 Replies
Feb 3, 2009
i want to skip animation for second third etc.. load, for 15 minutes...I have flash file in AS3, but I find only code for AS2:
Code:
stop();
var today = new Date();
[code]........
View 0 Replies
Oct 19, 2009
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
View 2 Replies
Jun 16, 2006
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 Replies
Apr 27, 2009
i have a over and out animation but i only want to play the out animation when the over animation has completely finished and the same with out animation. i have this code
[Code]...
View 2 Replies
Nov 1, 2009
I was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 Replies
Nov 4, 2010
On a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 Replies
Aug 10, 2011
I have an 2 animations that I need to syncronize. The first animation is a projector screen entering stage, the second is few text layers and images. I timed the second animation 2.2 sec after the screen animation starts (using timer event) and it worked. When I tested it in other computers and on the internet the screen movment was much slower so the second animation entered the stage too fast.
I want to order the second animation to enter only when the projector screen reach it's destination on stage. The screen animations has 2 parts, in animation and out animation connected by a stop(); commend in the middle.
View 4 Replies
Jun 29, 2011
After reading some articles about increasing performance, I read that if you would cache your movieclip animation to a sequence of bitmaps, that this would be much faster. So after spending lots of hours I created a bitmap animation class that converts a movieclip to a bitmapanimation.When I completed it, and did a performance test with about 40 movieclips on a stage size of (1024x900) and set the frameRate to 100 fpsIt runned on 58 frames per second. (30 mb memory) But when I tested it without converting it to bitmaps by doing it the old and simple way of adding the movieclip dynamically on the stage withalso 40 movieclips, it runned even better (61 fps). (4mb) And it did not use so much memory as the bitmap approach was doing.
Then I thought perhaps I was doing something wrong with convertinh to Bitmaps, and found on the internet also a Bitmap Animation Class, and after testing this one, I got the same result. It seems to run faster if you don't convert it to a bitmap sequence.I only have experienced negative points, like slower framerates, using more memory, and the prerendering causes a calculation performance pause when compileing. (this is even with the fix to pass the already rendered frames of the movieclip to the next bitmap animatioin class) I am now confused of what is the best way of creating better pefromance when using the same movieclip animation (like 80 times at once).
View 5 Replies
Nov 9, 2011
I need to do a good animation for school to pass my subject and I have done several animations. I thought maybe I do an animation with different choices. Basically you have the "Home" Screen and then you chose one and an animation is been played. Then when I press another button, a different animations is being played.
View 3 Replies