This may be a stupid simple question. But I am unable to figure out how to edit a Transition Time Line Effect once it's been implemented. I added the effect with no problems, but I need to make some adjustments to the fade now (because I am using the Transition effect), and I cannot find the controls again.
View 6 RepliesI have a short flv I want to play on my website. I use the below actionscript 2 code to play the video, but the anti-aliasing of text is really poor quality. I added a line to introduce "smoothing" to the video, but it appears to have no visible effect.
var my_video:Video;
var my_nc:NetConnection = new NetConnection();
my_nc.connect(null);
var my_ns:NetStream = new NetStream(my_nc);
my_video.attachVideo(my_ns);
my_ns.setBufferTime(2);
my_ns.play("thevideo.flv");
my_video.smoothing = true; //does nothing
Incidentally, I am exporting the flv video from aftereffects, and when I export the movie as a (larger) "lossless" quicktime movie, the movie looks perfect when played in quicktime, but has the same poor anti-aliasing when viewed in adobe media player, VLC, or mplayer.
My issue is that for my website I want there to be movies in between the interactive parts of it where the interfaces slide in and out. However, I can't stop a movie from playing over and over instead of playing once and going to the next frame.With 2.0 I haven't been able to find any research that helps me, probably because I don't know the correct keywords to search for.Right now I have my main time line set up with a loading bar on frames 1 & 2, that then jumps to frame 3 where I have embedded a movie (Instance named: mc_start) of the interface sliding in. Preferably after that I need it to jump to frame 4 where the actual interface is.
I can get the movie to end by going into the embedded movie's time line and simply have stop() ; at the final frame, but I can't get it to go to frame 4 on the main time line. If I having something like gotoAndPlay(4) ; on the final frame of the embedded movie's time line, it simply goes to frame 4 of the embedded time line and not frame 4 of the main time line. If there was a command to make it jump back to the main time line instead of the embedded time line, that would work perfectly.Coding on Frame 3 of the main time line to jump to Frame 4 would work if I knew the correct language to detect when the movie has ended (Movie is 191 frames long), so that afterwards it would immediately jump to Frame 4, but I haven't been able to find any resources that will teach me how to do it. Right now having gotoAndPlay(4) ; on Frame 3 of the main time line obviously makes it immediately skip the movie on Frame 3 and jump to Frame 4.
What I have is a movieclip and a button in scene 1 (which is the main timeline).There is an actionscript layer also on the main timeline. what I want to do is when I click the button, it would do a nextFrame(); in the movieclip timeline instead of the main timeline.
View 4 RepliesI have created a line on the stage with the Line tool, and then want to edit the Stroke and Style in the Properties panel. However, after creating the line these options are greyed out and not available to me. Even if I then select the Line with the Selection tool, I cannot edit the Stroke or the Style.
View 6 RepliesI have this clock code and would like to know what needs to be added or changed for it to reference the time off the server and not the local computer time (and preferably reference the server just once and not repeatedly). I already have a file on the server "time.php" that is providing the milliseconds. I know it should be fairly simple, but I just can't wrap my head around it.
[Code],,,
In Flash CS4, I'm trying to change the stroke width of my line or shape, with it selected, but the stroke width slider is greyed out (thus, unadjustable). Is it possible to edit a stroke width after something has been created? If so, how can this be done? I've tried selecting the line in all kinds of crazy ways, but still can't edit it.
View 3 RepliesI'm adding a line to a canvas using canvas.moveTo(0, 0); canvas.lineTo(100, 100);, but I then want the user to move the mouse to set the rotation of the line.Google suggests using the rotation property,but I don't have a reference to the line object.Can I get a reference to the line or should I rotate the whole canvas?
View 3 RepliesI'm trying to add a line to a movie clip. When I trace the width of the lineadded it traces correctly, but the line doesn't appear. If I do everything the same but add the line to the stage instead of the movie clip it does appear. I know this is one of those cases where I can't see the forest fro the trees but
Here's the relevant code:
var xAxis = new Shape(); graph_mc.addChild(xAxis); xAxis.graphics.lineStyle(2, 0x000000, 1) xAxis.graphics.moveTo(startX, startY); xAxis.graphics.lineTo(maxX, startY) xAxis.name =
[code].....
i have a project , needed to add input text , so i maked a movie clip ,inside i added a input text field, after i added it.ctrl+entermy masking photo , have a crush line ,a long one ,some thing like bugging, but if i remove the input text field ,the masking photo have no problem again ...any one facing this problem ???? i cant do any thing about it, any one can teach me how to fix this problem ?? my project have a long coding,it work fine it i didt add the input text.
View 2 RepliesI'm using the text effect I found in ActionScript Text Animation , and the script works great.
My question is, is it possible to have line breaks? I tried adding spaces to end a line, but you'd have to wait for the script to read through the added spaces before the next line begins.
I am making a small project and i want to know how to get flash to change from one time line to the next , i am thinking of using an if statement to check if an object had passed the top of the stage and if that condition is true then i want it to go to the next layer on a different frame to play another animation?
View 4 Repliesis there any way to edit the time in an interval, once you have set it?
View 14 RepliesThe old method for the mx:TextArea no longer works. Specifically:
myMxTextArea.verticalScrollPosition = myMxTextArea.maxVerticalScrollPosition;
I've found this method for Spark but seems a bit kludgy:
mySparkTA.scrollToRange(mySparkTA.text.length-1, mySparkTA.text.length);
Is there a more straightforward way to do this?
I want to edit xml file on run time dynamically using AS3 if it possible send the tutorials links or sample script.
View 1 RepliesI have a time line of 1441 frames my frameRate is 24 fps so it takes 1 minute exactly to complete the timeline animation I want to Display the Remaining time as file starts I need formula to place in ENTER_FRAME event which displays the time left
View 2 RepliesI have a time line of 1441 framesmy frameRate is 24 fpsso it takes 1 minute exactly to complete the timeline animationI want to Display the Remaining time as file startsI need formula to place in ENTER_FRAME event which displays the time left
View 1 Repliesi want to duplicate a line 4 times, and move each line on Yaxis, with a delay of 1sec each time. I know i must use setinterval+duplicateMovieClip, but i've got pbs :-( actually, i've got my AS code on my line :
[Code]...
Created a new file & new layer with 300 frames.Only used 150 frames for the animation.How do I edit (trim) the scene / project down to JUST the frames I need (ie 300 to 150) prior to export as swf?
View 7 RepliesI am trying to load various swfs into a main swf. The initial swf loads in by default, the others load when buttons are clicked. All of the buttons also call a lengthy function called loadpic which appears later in the code - Currently the buttons load in the swfs as required, however the swfs are always behind the initial default swf. Is there a way to add removeChild to the buttons? I have tried creating seperate functions for each button and added the line removeChild(); however doing that means I would also have to repeat all of the later functions as well. If I add removeChild(); without placing it in a function the default swf doesn't show at all.
[Code]....
[Code]...
How can you change this to where when the page is loaded it does not say (loading) and it will say (No live video streams) you can view archived videos. Is this on the server FMS Interactive in the configuration or can it be done from the code inserted above?
Is there a way or some kind of magical button that lets you find all code in any frame in your time line or flash file? CS4
View 1 RepliesI am trying to make an animation with three seperate buttons that when clicked on make one set of text disappear and new text appear in its place. My code so far looks like this:
stop();
//---Bio Button Text---\
go.addEventListener (MouseEvent.CLCIK, bioplay);
[Code].....
I have a swf with time delays added to skip to the next part of the video.[code]Now I have another swf that loads the video into a container using the code below once a user clicks on some text.[code]The first time the user watches the clip it does PERFECT! but if a user is to click the link again half way through the video it throws all the timing completely off. You can see I tried using unloadMovie to unload anything from the frame when a user clicks the text to make sure the video wasn't playing back behind.I was wondering if it may be the fact I have.[code]for all my timed breaks (different times of course) should I rename each myInterval or something?
View 9 Repliesi have an xml file and i want my code in flash to read it line by line but its only showing the first line out of 5 lines.Below is the code:
var NigeriaNumber:Number;
var stateName:String;
var year:String;
[code].....
Got to the point where the hole in my AS3 knowledge is getting large!Realising I have confusion about the relationship of:Body of code on first frame of AS3 file.(Which I have so far used to create instances of library objects using addchild and make calls to class code).Is this code called the document code? What do people call it?Numerous classes linked together by extending each other etc.Library objects (usually graphical objects)Should it be done differently? have the following problems due to lack of understanding:Addchild complicated from a class but straight forward in main body code.Cant call functions on the main body code from classes, because class code does not know the main body code exists?
View 1 RepliesAS2 on a button symbol:
on (release) {
_root.randomVar = pie
trace (_root.randomVar)[code]..........
If I put Var = X in the time line it comes out undefined, no variables seem to be working, tried it in 2x flash projects
I'm actually relatively new to flash and actionscript but I could say I have fair knowledge about them. So anyway, I usually build flash websites the traditional way using timeline animation and scripting. Today I had a job interview and they said they're looking for someone who can develop any web design into a Flash CMS with a back-end office for the client to edit the content without having to edit the FLA file or any code.
Accordingly, I'd like to know where and how to start. What are the main concepts I should follow/adapt?
I want to run a sound once in a timeline but want the sound to stop at the end of the first run on the timeline but want the timeline to continue to repeat without the sound running again.
View 3 RepliesWhat I mean is, can I add a sound that will only play if there are enough frames for the sound?I want to only play on the frames that it is on, but it plays all the way through the sound file regardless of the amount of frames.
View 0 Replies