I'm trying to resize an animation I have larger, it has 12 layers, and 20 frames or so on each layer. I'm using edit multiple frames and selecting them all, and it is working to resize them, but randomly it will delete one of my objects for a few of the frames. When I scrub through the timeline after the resize, something is always missing, but it's always a random object and only for a few frames
View 1 RepliesI'm not a huge flash expert by any means, but I am working on some banner and I need to take the larger 336x280 banners and resize them to 300x250. I've change the size of the stage and shrinking down the bitmaps etc is fine. The issue I am having is the aminated graphics and buttons I have on the stage. I've tried editing multiple frames, onions skins .etc to do it, but no matter what the animation will still only edit the first place I clicked on the symbol. So it goes from the smaller size and animates to the larger size and its original position on the old size.
It seems there must be a way to adjust animations without having to redo them all. Right?
I have set a stage to this size: 1200x330 px.
All graphics in this animation area greater than the stage, so I could extend the stage size to 1200 x 450 px.
So, my miz size for the movie is 1200x330 px and max size is 1200x450 px.
Is there a way to show the movie at minimum size or maximum size based on the browser window heigt?
note that the movie is put iside a table in my html file.
I would like to obtain something similar to this: [URL]
If you resize the browser window the flash movie (and only the flash movie) will be shown in different ways. If the browser window is higher enough the whole flash movie is shown. If the browser window is not higher enough, the top and the bottom of the movie will be cut. Of course there is a trick that cuts the movie only to a specified minimum size.
is there some way to resize all the animation, all the symbols in all keyframes proportionally? I did all the animation, but now I realize that´s too large on the stage.
View 2 RepliesI have a flash animation with the size of 1280x1024 and I want to embed it into an HTML file. I want the flash file to be displayed in 800x600. This is my code:
<html xmlns="[URL]" xml:lang="en" lang="en">
<body align="center"><object>
<param name="movie" value="/flash/connect.swf" />
<embed src="/flash/connect.swf" width="800" height="600"></embed>
</object></body></html>
Well, it doesn't work. I do have a 800x600 frame, but the flash file itself still displayed on its original size.
Is it possible to resize the application at the same moment when the Accordion size change, to make effect resize og the last one synchronised with resize of Application ?
In my code,, the Application is resized after the resize of Accordion is completed:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute" minWidth="400" minHeight="300" backgroundColor="white"
[Code]....
{URL] Here I have a movieclip that I want the clip size to change when pressed a button, and change into another size when another button is pressed. but all these, with actionscript movement. How do I...? Here is the fla: [URL]
View 3 Repliesok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 RepliesI have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 RepliesI'm using Flex 4.5.1 with AIR 2.7 (and Flash Builder 4.5.1) to build an app for the Blackberry Playbook.
The app has a large textarea that needs to be resized when the soft keyboard shows up. I am able to hook into the soft keyboard events and do things there.
Now, I want to resize the textarea to fit the remaining part of the screen when the keyboard shows up. I know the current and destination size and want to use a smooth animation to show the textarea resizing. (I can't already set the height and can see the textarea being correctly resized in the keyboard_activating event - but I want to do it through an animation). I've tried using the Animate class, the spark.effects.Move class and none of them seem to work in this case. They seem to run the animation but the screen does not get refreshed!
[Code]...
On a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 RepliesI need to do a good animation for school to pass my subject and I have done several animations. I thought maybe I do an animation with different choices. Basically you have the "Home" Screen and then you chose one and an animation is been played. Then when I press another button, a different animations is being played.
View 3 RepliesI have a movieclip that I want to be resized when a button is clicked. I want the animation to be smooth as if it had weight though. I read the tutorial on this but I need something slightly different, I would rather it where I can just refer to a function that is set in another movieclip. That way I could easily refer to it again and just set the height, width, and if possible, x, and y.
And my second question, is how to keep the border of my movieclip that is going to be resized the same thickness. I want the inside to be resized but the sides to stay the same width but move to stay on the edge.
I've finished my flash site using a resolution of 1024x768: my professor wasn't so happy of a resolution so "high" (even if today is something like standard) since somebody might still have an old monitor with low res.Since I really don't want to get a bad vote I wanted to change the resolution to 1000x550 because with that res a 1024x768 monitor still can see everything: then I've exported my .swf file and then into the .HTML file I've changed the width and height fields.
View 3 RepliesI'm new to CS5.5 after being away since, I think, Macromedia was around. I just bought CS5.5 soley for creating simple, fun Android apps for my son (animated storybooks etc).
However, I'm constantly changing my phones and we also have a tablet and the wife has a phone with a small resolution.
What I'm wanting to do, is create an app that's at a resolution for my tablet (1024x600), but then also be able to scale it down to my Optimus 3D (800x480) and the Wife's Xperia Mini Pro (640x480)
Now, there will be bitmaps in there, so I didn't want the phone/Air resizing the app to fit the screen and using more ram and cpu than needed so I was wanting to create 2 or 3 versions all at different resolutions.
I'm doing and animatic movie with flash (means lots of hand drawn frames and many layers) I also have about 40 sequences
I would like to scale down my whole movie to a smaller size like 720*480 (actual is 1980*1080) but when I change size in "propery" window it just change the size of workspace and drawings stays the same size.
is there any way to have the graphics scale to the new document size without using "transform tool" on each sequence, because flash crashes when I do that.
I have more reach application, in simplify my problem looks so:
I dont' need in scroling. How do it? With JavaScript? or exists decision in ActionScript 3?
I'm creating a Flash SWC for use in an AIR project.
I created a component which I tweened from big to small.
I tried sampling the width/height at different keyframes (using both flash actions and the flex debugger) and the object always reports itself to be the original width/height.
The result is that any content I assign to the SWC container does not resize when the tween happens.
Is there another way to put dynamic flex content into a SWC?
I have one problem with my swf file which I created,I created the file useing the dimentions 1024x768, for pc I need these mentions the same swf file I want to use it in some other divise which will support only 480x272 dimentions.so, without creating the same file with these dimentions, is there any posible way to resize the swf file while publishing and the devise which I want to play the swf file it will support only swf format.
View 2 RepliesI am trying to resize my current document.It is currently 1000px and I want to make it 1300px but when I do that, all the elements that is near the top becomes off the screen to the top.I only want the document to be longer in height from the bottom but not sure what it is affecting the elements on the top?
View 7 RepliesI'm building my website using a flash template i bought. There is some sort of object (it's called sprite 45) that is like a box (I'll call it the Mystery Box). It is overlaid on a text box with my bio in the text box. When I run the test movie for the flash file, the bio comes up very narrow. It's width is constrained by the Mystery Box. It's really narrow, hardly more than an inch, which makes it hard to read the bio. It's possible to scroll the bio up an down, but it's still too narrow. I'd like to widen the Mystery Box. However, unlike the text box, it doesn't seem possible to do it.
View 2 RepliesUsing the flash authoring tool, I want to resize a dynamic textfield to a particular height.However, it will not allow me to size the textfield smaller than a height that will fit all of the (multiline) text. How can I override this and make the height smaller so I can use scrollbars?
View 5 RepliesI've a small problem with a banner. There's a part of text (made into a symbol) that has to jump out, so I made it 150% and the text around it moves away and then comes back. But the part that has to grow, does this in shocks. Does enyone now a way to prevend or mask this, so the client can be happy?
View 2 RepliesI am just getting back into using Flash after not using it for about 5 years. I'm having an issue with the simplest thing! I want to be able to type pixel values into the Properties panel to transform/resize an object from the OBJECT CENTER as reference point. If I use the transform tool, it uses the center of the object as the reference. However, if I do as above and type values into the Properties width/height, the object transforms with the top left corner as reference. If I need two or more objects sized exactly the same, or if I want to do a "zoom in" effect, using the transform tool is very ineffecient!
My object seems to be showing that the center is set as the reference point (white circle in center of object). Also, the objects I am working with are jpg's and psd's imported to the library, and made into movie clip symbols.
I am adding MovieClips in columns and rows according to the main container with static width and heightnow if user wants to enter for more rows and columnsHow I should change the Moviclips size that can adjust within main container ( Blue Box as in image )Image 1 : I am adding small white movieClips with default width and heightImage 2 : its required , small movieClips resized according to main container, when Rows and Cloumns are increased
View 4 RepliesIn Flash CS3, when I resize a movie clip symbol that has the blur filter applied to it, the amount of blur changes.
View 1 Replieswould like to make 3 versions of the same site, and then have them redirected depending on the user's monitor resolution. Because of this, I need to make some of the movie clips smaller, and some bigger. What is the best way to do this. Some of the movie clips contain text.
View 1 RepliesI am creating my website in the Flash and I am having problems. I need the image on the bottom of my page (background) to resize itself according to window size similar to this site..... like here http:[url]....for example: if i make background with res 1024*768 and somebody will look at it with monitor res 1920*1200 he`ll have image resized to this ressoulution
View 4 RepliesIE 8 Flash CS4 v10 Windows XP Home SP3 (NOTE: The word "Resize" refers to an HTML change of the movie size; it does not refer to a Window resize)
Objective: Display a transparent 800x600 flash movie in IE, stretching movie to 100% width and height of webpage but keeping the objects within the movie from getting re-scaled. Objects are re-positioned at runtime via ActionScript with values meant to be relative to stage dimensions.
Problem: The movie resize is messing up the object re-positioning. The movie is indeed stretching to 100% of the width & height of the browser window's client area, but the objects are repositioned relative to something else (perhaps screen dimensions, but not sure). Result: Objects which were programatically positioned relative to original stage size are spaced way too far apart in IE, in some cases off the screen entirely, though they were not like this in the Flash editor.Question(s): Why are objects which were positioned within the original stage dimensions being kicked off the browser screen while the movie itself remains entirely on-screen even after resize? What dimensions/values are guiding the automatic post-resize repositioning of the objects? (These proportions appear to be different from the change in proportions of the movie itself.)
Flash 8's video encoder, use to let you crop (cut x amount of pixels out) and then resize a video (and in that order it did it). CS5's Media Encoder is confusing, from what I can tell it cannot do both, you either can crop or resize but not both. ANd if you can do both, you definately cant crop before the resize. So which is it? Resizing made sense last, because you could put in new values for the resize nad figure out how much you need to crop out.
View 4 Replies